Valid

SJ/T 11741-2019Test method for flex resistance of flexible printed circuit materials (English PDF)

挠性印制电路材料的耐挠曲性测试方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for SJ/T 11741-2019 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

January 1, 2019

Implementation date

April 1, 2020

Scope

SJ/T 11741-2019 is the English-translated version of 挠性印制电路材料的耐挠曲性测试方法.

SJ/T 11741-2019 is the Chinese standard "Test method for flex resistance of flexible printed circuit materials". This standard specifies a test method for flex resistance of flexible printed circuit materials.

This method is applicable to copper foil and flexible copper clad laminate for flexible copper clad laminate. It was issued by Ministry of Industry and Information Technology.

Found what you need?

Document preview — SJ/T 11741-2019

National Standard of the People's Republic of China

ICS
31.180
Classification
L30

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Subject Contents
  • 1.2 Application Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Height of Raised Access Floor
  • 3.2 Abbreviations
  • 3.3 Bearing of Four Conner
  • 3.4 Systematically Resistance of Raised Access Floor
  • 4 Requirements
  • 4.1 Relation between the Host and the Device
  • 4.2 UTI Interface
  • 4.3 Requirements for the Physical Layer of UTI Device
  • 4.4 Transport Stream Interface
  • 4.5 Command Data Interface
  • 4.6 Characteristic Requirements for UTI Physical Layer
  • 5 Instruments, equipment, and materials
  • 5.1 Diagram of Module in Connection with Host
  • 5.2 DTV-CI Interface
  • 5.4 Command Interface
  • 5.5 Physical Requirement
  • 5.6 UTI-HTU
  • 5.7 Measuring Condition
  • 6 Sample processing and determination
  • 6.1 TSI-Physical, Link Layers
  • 6.2 TSI-Transport Layer
  • 6.3 TSI - Upper Layers
  • 6.4 Initialization Test
  • 6.5 Resource Manager Test
  • 6.6 Application Information Resource Test
  • 6.7 Date-time Information Resource Test
  • 6.8 CA Application Resource Test
  • 6.9 UTI Device TS Test
  • 7 Marking, packaging, transportation and storage
  • 7.1 Data Structure
  • 7.2 Transport Layer
  • 7.3 Session Layer
  • 7.4 Resource of Resource Manager
  • 7.5 Application Information Resources
  • 7.6 Date and Time Information Resources
  • 7.9 Hot Plugging/Unplugging Test
  • 8 Test report
  • 8.1 Introduction
  • 8.2 Resources
  • 8.3 Application Protocol Data Units (APDU)
  • 8.4 System Management Resources
  • 8.5 Host Control and Information Resources
  • 8.6 Man-Machine Interface Resource
  • 8.7 Resource Identifiers and Application Object Tags
  • 9.1 Electromagnetic Compatibility
  • 9.2 Safety
  • 9.3 Materials

1 Foreword

SJ/T 11741-2019 was issued by Ministry of Industry and Information Technology on 11 November 2019 and has been in force since 1 April 2020.

The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 8 pages in English translation.

2 Scope Preview

This standard specifies a test method for flex resistance of flexible printed circuit materials. This method is applicable to copper foil and flexible copper clad laminate for flexible copper clad laminate.

SJ/T 11741-2019 falls under ICS 31.180, in the field of electronics.

This catalogue holds 221 other SJ/T standards in that field.

In this catalogue, SJ/T standards carry edition years from 1980 to 2026.

3 About this standard

Sector: Electronics Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 8 pages (approximate)

Chinese original: about 7,710 characters

4 Related standards

Standards on related subjects:

GB/T 12631-2017 — Test method for resistance of conductors of printed boards

SJ/T 11993-2025 — Testing method for the pad cratering of printed circuit board assembly

SJ/T 11742-2019 — Thermally conductive non-prepreg prepreg for printed circuit

5 Classification and status

International classification (ICS): 31.180

Chinese Standard Classification (CCS): L 30

Prefix SJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

How to Download SJ/T 11741-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
8 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SJ/T 11741-2019

$145.00