SJ/T 11734-2019Detailed Specification of Chip Scale Package (CSP) LED Blank (English PDF)
芯片级封装(CSP)LED空白详细规范
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for SJ/T 11734-2019 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2019
Implementation date
April 1, 2020
Scope
SJ/T 11734-2019 is the English-translated version of 芯片级封装(CSP)LED空白详细规范.
SJ/T 11734-2019 is the Chinese standard "Detailed Specification of Chip Scale Package (CSP) LED Blank". This standard specifies the technical requirements for chip-scale package (CSP) LEDs, including general requirements, limit values, optoelectronic characteristics, test conditions and methods, and inspection requirements for COB LEDs. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — SJ/T 11734-2019
National Standard of the People's Republic of China
- ICS
- 31.260
- Classification
- L53
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 1.1 Subject Contents
- 1.2 Application Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Height of Raised Access Floor
- 3.2 Abbreviations
- 3.3 Bearing of Four Conner
- 3.4 Systematically Resistance of Raised Access Floor
- 4 Requirements
- 4.1 Relation between the Host and the Device
- 4.2 UTI Interface
- 4.3 Requirements for the Physical Layer of UTI Device
- 4.4 Transport Stream Interface
- 4.5 Command Data Interface
- 4.6 Characteristic Requirements for UTI Physical Layer
- 5 Instruments, equipment, and materials
- 5.1 Diagram of Module in Connection with Host
- 5.2 DTV-CI Interface
- 5.4 Command Interface
- 5.5 Physical Requirement
- 5.6 UTI-HTU
- 5.7 Measuring Condition
- 6 Sample processing and determination
- 6.1 TSI-Physical, Link Layers
- 6.2 TSI-Transport Layer
- 6.3 TSI - Upper Layers
- 6.4 Initialization Test
- 6.5 Resource Manager Test
- 6.6 Application Information Resource Test
- 6.7 Date-time Information Resource Test
- 6.8 CA Application Resource Test
- 6.9 UTI Device TS Test
- 7 Marking, packaging, transportation and storage
- 7.1 Data Structure
- 7.2 Transport Layer
- 7.3 Session Layer
- 7.4 Resource of Resource Manager
- 7.5 Application Information Resources
- 7.6 Date and Time Information Resources
- 7.9 Hot Plugging/Unplugging Test
- 8 Test report
- 8.1 Introduction
- 8.2 Resources
- 8.3 Application Protocol Data Units (APDU)
- 8.4 System Management Resources
- 8.5 Host Control and Information Resources
- 8.6 Man-Machine Interface Resource
- 8.7 Resource Identifiers and Application Object Tags
- 9.1 Electromagnetic Compatibility
- 9.2 Safety
- 9.3 Materials
1 Foreword
SJ/T 11734-2019 was issued by Ministry of Industry and Information Technology on 11 November 2019 and has been in force since 1 April 2020.
The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 11 pages in English translation.
2 Scope Preview
This standard specifies the technical requirements for chip-scale package (CSP) LEDs, including general requirements, limit values, optoelectronic characteristics, test conditions and methods, and inspection requirements for COB LEDs.
SJ/T 11734-2019 falls under ICS 31.260, in the field of electronics.
This catalogue holds 221 other SJ/T standards in that field.
In this catalogue, SJ/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Electronics Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 11 pages (approximate)
Chinese original: about 17,161 characters
4 Related standards
Standards on related subjects:
GB/T 43770-2024 — Specification for indoor LED displays
GB/T 15651.7-2024 — Semiconductor devices - Part 5-7: Optoelectronic devices - Photodiodes and phototransistors
SJ/T 11890-2023 — Design requirement of energy conservation for LED displays
SJ/T 11733-2019 — Detailed Specification of COB LED Blank
5 Classification and status
International classification (ICS): 31.260
Chinese Standard Classification (CCS): L 53
Prefix SJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
How to Download SJ/T 11734-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SJ/T 12063-2026 — Test method of electric double layer capacitor system for road vehicles
SJ/T 12097-2026 — Information technology - Software bill of materials data format specification
SJ/T 12099-2026 — Technical specifications for industrial AI visual appearance inspection systems
SJ/T 11734-2019
$355.00