Valid

SJ/T 11460.3.4-2019LCD backlight assembly Part 3-4: Blank detail specification for automotive LED backlight assembly (English PDF)

液晶显示用背光组件 第3-4部分:车载用LED背光组件空白详细规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (16 pages)

Need quotation for your management?

Get a formal quotation for SJ/T 11460.3.4-2019 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

January 1, 2019

Implementation date

April 1, 2020

Scope

SJ/T 11460.3.4-2019 is the English-translated version of 液晶显示用背光组件 第3-4部分:车载用LED背光组件空白详细规范.

SJ/T 11460.3.4-2019 is the Chinese standard "LCD backlight assembly Part 3-4: Blank detail specification for automotive LED backlight assembly". This standard specifies the basic format and relevant requirements for the preparation of detailed specifications for on-board LED backlight assemblies for passenger and luggage compartments.

This standard applies to vehicle-mounted LED backlight assemblies for passenger compartments and luggage compartments. It was issued by Ministry of Industry and Information Technology.

Found what you need?

Document preview — SJ/T 11460.3.4-2019

National Standard of the People's Republic of China

ICS
31.120
Classification
L47

Issued by: Ministry of Industry and Information Technology

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Subject Contents
  • 1.2 Application Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Height of Raised Access Floor
  • 3.2 Abbreviations
  • 3.3 Bearing of Four Conner
  • 3.4 Systematically Resistance of Raised Access Floor
  • 4 Requirements
  • 4.1 Relation between the Host and the Device
  • 4.2 UTI Interface
  • 4.3 Requirements for the Physical Layer of UTI Device
  • 4.4 Transport Stream Interface
  • 4.5 Command Data Interface
  • 4.6 Characteristic Requirements for UTI Physical Layer
  • 5 Instruments, equipment, and materials
  • 5.1 Diagram of Module in Connection with Host
  • 5.2 DTV-CI Interface
  • 5.4 Command Interface
  • 5.5 Physical Requirement
  • 5.6 UTI-HTU
  • 5.7 Measuring Condition
  • 6 Sample processing and determination
  • 6.1 TSI-Physical, Link Layers
  • 6.2 TSI-Transport Layer
  • 6.3 TSI - Upper Layers
  • 6.4 Initialization Test
  • 6.5 Resource Manager Test
  • 6.6 Application Information Resource Test
  • 6.7 Date-time Information Resource Test
  • 6.8 CA Application Resource Test
  • 6.9 UTI Device TS Test
  • 7 Marking, packaging, transportation and storage
  • 7.1 Data Structure
  • 7.2 Transport Layer
  • 7.3 Session Layer
  • 7.4 Resource of Resource Manager
  • 7.5 Application Information Resources
  • 7.6 Date and Time Information Resources
  • 7.9 Hot Plugging/Unplugging Test
  • 8 Test report
  • 8.1 Introduction
  • 8.2 Resources
  • 8.3 Application Protocol Data Units (APDU)
  • 8.4 System Management Resources
  • 8.5 Host Control and Information Resources
  • 8.6 Man-Machine Interface Resource
  • 8.7 Resource Identifiers and Application Object Tags
  • 9.1 Electromagnetic Compatibility
  • 9.2 Safety
  • 9.3 Materials

1 Foreword

SJ/T 11460.3.4-2019 was issued by Ministry of Industry and Information Technology on 11 November 2019 and has been in force since 1 April 2020.

It is one of 19 parts of the SJ/T 11460 series.

The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard specifies the basic format and relevant requirements for the preparation of detailed specifications for on-board LED backlight assemblies for passenger and luggage compartments. This standard applies to vehicle-mounted LED backlight assemblies for passenger compartments and luggage compartments.

SJ/T 11460.3.4-2019 falls under ICS 31.120, in the field of electronics.

This catalogue holds 221 other SJ/T standards in that field.

In this catalogue, SJ/T standards carry edition years from 1980 to 2026.

3 About this standard

Sector: Electronics Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 16 pages (approximate)

Chinese original: about 23,261 characters

4 Related standards

Other parts of this standard:

SJ/T 11460.1-2013 — Backlight units for liquid crystal displays. Part 1: Generic specification

SJ/T 11460.2-2014 — Backlight units for liquid crystal displays. Part 2: Cold Cathode Fluorescent Lamp (CCFL) backlight units. Blank detailspecification

SJ/T 11460.3.1-2014 — Backlight units for liquid crystal displays. Part 3-1: LED backlight unit for portable display. Blank detail specification

SJ/T 11460.3.2-2013 — Backlight units for liquid crystal displays. Part 3-2: LED backlight unit for monitor. Blank detail specification

SJ/T 11460.3.3-2016 — Backlight assemblies for liquid crystal displays - Part 3-3-1: Detailed specifications for direct-lit LED backlight assemblies for television receivers

SJ/T 11460.3.3.1-2021 — Backlight assemblies for liquid crystal displays - Part 3-3-1: Detailed specifications for direct-lit LED backlight assemblies for television receivers

SJ/T 11460.3.3.2-2025 — Display Light Source Assembly - Part 3-3-2: Detailed Specifications for Side-Lighted LED Backlight Assembly for Television Receivers

SJ/T 11460.3.5-2019 — LCD backlight assembly Part 3-5: Blank detail specification for LED backlight assembly for household appliances

SJ/T 11460.3.6-2019 — Backlight assemblies for liquid crystal displays Part 3-6: Blank detail specification for LED backlight assemblies for industrial instruments

SJ/T 11460.3.8-2025 — Display Light Source Components - Part 3-8: Detailed Specifications for Micro-miniature LED Backlight Components

SJ/T 11460.4-2018 — Liquid gas forging hammer

SJ/T 11460.6.1-2015 — Backlight unit for liquid crystal display. Part 6-1: Measuring method of optical and optoelectrical parameters

SJ/T 11460.6.1-2025 — Display light source assemblies - Part 6-1: Test methods - Photoelectric parameters of LED backlight assemblies

SJ/T 11460.6.2-2015 — Backlight unit for liquid crystal display. Part 6-2: Measuring methods of dynamic optical and optoelectrical parameters

SJ/T 11460.6.2-2025 — Display light source assemblies - Part 6-2: Test methods - Dynamic optical and photoelectric parameters of LED backlight assemblies

SJ/T 11460.6.3-2022 — Display light source assemblies - Part 6-3: Test methods LED light strips - Optoelectronic parameters

SJ/T 11460.6.4-2023 — Display lighting unit - Part 6-4: Measuring methods of optoelectrical parameters of LED light board

SJ/T 11460.6.5-2023 — Display light source assembly - Part 6-5: Test method Optoelectronic parameters of LED front light assembly

Standards on related subjects:

SJ/T 11141-2017 — Generic specification for LED displays

SJ/T 11281-2017 — Measure methods of light emitting diode (LED) displays

GB/T 18910.2-2003 — Liquid crystal and solid-state display devices -- Part 2: Liquid crystal display modules sectional specification

5 Classification and status

International classification (ICS): 31.120

Chinese Standard Classification (CCS): L 47

Prefix SJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.

How to Download SJ/T 11460.3.4-2019

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
16 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SJ/T 11460.3.4-2019

$485.00