SJ/T 11460.3.6-2019Backlight assemblies for liquid crystal displays Part 3-6: Blank detail specification for LED backlight assemblies for industrial instruments (English PDF)
液晶显示用背光组件 第3-6部分:工业仪表用LED背光组件空白详细规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for SJ/T 11460.3.6-2019 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2019
Implementation date
April 1, 2020
Scope
SJ/T 11460.3.6-2019 is the English-translated version of 液晶显示用背光组件 第3-6部分:工业仪表用LED背光组件空白详细规范.
SJ/T 11460.3.6-2019 is the Chinese standard "Backlight assemblies for liquid crystal displays Part 3-6: Blank detail specification for LED backlight assemblies for industrial instruments".
This standard specifies the basic format and related requirements for the preparation of detailed specifications for LED backlight assemblies for industrial instrumentation.
This standard applies to LED backlight assemblies for industrial instrumentation. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — SJ/T 11460.3.6-2019
National Standard of the People's Republic of China
- ICS
- 31.120
- Classification
- L47
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 1.1 Subject Contents
- 1.2 Application Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Height of Raised Access Floor
- 3.2 Abbreviations
- 3.3 Bearing of Four Conner
- 3.4 Systematically Resistance of Raised Access Floor
- 4 Requirements
- 4.1 Relation between the Host and the Device
- 4.2 UTI Interface
- 4.3 Requirements for the Physical Layer of UTI Device
- 4.4 Transport Stream Interface
- 4.5 Command Data Interface
- 4.6 Characteristic Requirements for UTI Physical Layer
- 5 Instruments, equipment, and materials
- 5.1 Diagram of Module in Connection with Host
- 5.2 DTV-CI Interface
- 5.4 Command Interface
- 5.5 Physical Requirement
- 5.6 UTI-HTU
- 5.7 Measuring Condition
- 6 Sample processing and determination
- 6.1 TSI-Physical, Link Layers
- 6.2 TSI-Transport Layer
- 6.3 TSI - Upper Layers
- 6.4 Initialization Test
- 6.5 Resource Manager Test
- 6.6 Application Information Resource Test
- 6.7 Date-time Information Resource Test
- 6.8 CA Application Resource Test
- 6.9 UTI Device TS Test
- 7 Marking, packaging, transportation and storage
- 7.1 Data Structure
- 7.2 Transport Layer
- 7.3 Session Layer
- 7.4 Resource of Resource Manager
- 7.5 Application Information Resources
- 7.6 Date and Time Information Resources
- 7.9 Hot Plugging/Unplugging Test
- 8 Test report
- 8.1 Introduction
- 8.2 Resources
- 8.3 Application Protocol Data Units (APDU)
- 8.4 System Management Resources
- 8.5 Host Control and Information Resources
- 8.6 Man-Machine Interface Resource
- 8.7 Resource Identifiers and Application Object Tags
- 9.1 Electromagnetic Compatibility
- 9.2 Safety
- 9.3 Materials
1 Foreword
SJ/T 11460.3.6-2019 was issued by Ministry of Industry and Information Technology on 11 November 2019 and has been in force since 1 April 2020.
It is one of 19 parts of the SJ/T 11460 series.
The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the basic format and related requirements for the preparation of detailed specifications for LED backlight assemblies for industrial instrumentation. This standard applies to LED backlight assemblies for industrial instrumentation.
SJ/T 11460.3.6-2019 falls under ICS 31.120, in the field of electronics.
This catalogue holds 221 other SJ/T standards in that field.
In this catalogue, SJ/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Electronics Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 15 pages (approximate)
Chinese original: about 22,285 characters
4 Related standards
Other parts of this standard:
SJ/T 11460.1-2013 — Backlight units for liquid crystal displays. Part 1: Generic specification
SJ/T 11460.2-2014 — Backlight units for liquid crystal displays. Part 2: Cold Cathode Fluorescent Lamp (CCFL) backlight units. Blank detailspecification
SJ/T 11460.3.1-2014 — Backlight units for liquid crystal displays. Part 3-1: LED backlight unit for portable display. Blank detail specification
SJ/T 11460.3.2-2013 — Backlight units for liquid crystal displays. Part 3-2: LED backlight unit for monitor. Blank detail specification
SJ/T 11460.3.3-2016 — Part 3-3-1: Detailed specifications for direct-lit LED backlight assemblies for television receivers
SJ/T 11460.3.3.1-2021 — Part 3-3-1: Detailed specifications for direct-lit LED backlight assemblies for television receivers
SJ/T 11460.3.3.2-2025 — Display Light Source Assembly - Part 3-3-2: Detailed Specifications for Side-Lighted LED Backlight Assembly for Television Receivers
SJ/T 11460.3.4-2019 — LCD backlight assembly Part 3-4: Blank detail specification for automotive LED backlight assembly
SJ/T 11460.3.5-2019 — LCD backlight assembly Part 3-5: Blank detail specification for LED backlight assembly for household appliances
SJ/T 11460.3.8-2025 — Display Light Source Components - Part 3-8: Detailed Specifications for Micro-miniature LED Backlight Components
SJ/T 11460.4-2018 — Liquid gas forging hammer
SJ/T 11460.6.1-2015 — Backlight unit for liquid crystal display. Part 6-1: Measuring method of optical and optoelectrical parameters
SJ/T 11460.6.1-2025 — Display light source assemblies - Part 6-1: Test methods - Photoelectric parameters of LED backlight assemblies
SJ/T 11460.6.2-2015 — Backlight unit for liquid crystal display. Part 6-2: Measuring methods of dynamic optical and optoelectrical parameters
SJ/T 11460.6.2-2025 — Display light source assemblies - Part 6-2: Test methods - Dynamic optical and photoelectric parameters of LED backlight assemblies
SJ/T 11460.6.3-2022 — Display light source assemblies - Part 6-3: Test methods LED light strips - Optoelectronic parameters
SJ/T 11460.6.4-2023 — Display lighting unit - Part 6-4: Measuring methods of optoelectrical parameters of LED light board
SJ/T 11460.6.5-2023 — Display light source assembly - Part 6-5: Test method Optoelectronic parameters of LED front light assembly
Standards on related subjects:
SJ/T 11141-2017 — Generic specification for LED displays
SJ/T 11281-2017 — Measure methods of light emitting diode (LED) displays
GB/T 18910.2-2003 — Liquid crystal and solid-state display devices -- Part 2: Liquid crystal display modules sectional specification
5 Classification and status
International classification (ICS): 31.120
Chinese Standard Classification (CCS): L 47
Prefix SJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download SJ/T 11460.3.6-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SJ/T 11460.3.8-2025 — Display Light Source Components - Part 3-8: Detailed Specifications for Micro-miniature LED Backlight Components
SJ/T 11460.3.5-2019 — LCD backlight assembly Part 3-5: Blank detail specification for LED backlight assembly for household appliances
SJ/T 11460.4-2018 — Liquid gas forging hammer
SJ/T 11460.3.6-2019
$485.00