SJ/T 11448-2013Code of Software Park Planning and Design (English PDF)
软件园区规划设计规范
This is a limited preview
Buy now to download the full PDF (39 pages)
Need quotation for your management?
Get a formal quotation for SJ/T 11448-2013 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2013
Implementation date
January 1, 2013
Scope
SJ/T 11448-2013 is the English-translated version of 软件园区规划设计规范.
SJ/T 11448-2013 is the Chinese standard "Code of Software Park Planning and Design". This standard applies to new construction, renovation, expansion planning and design software park project.
This standard applies to construction land size of 200 hectares within the park. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — SJ/T 11448-2013
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 1.1 Subject Contents
- 1.2 Application Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Height of Raised Access Floor
- 3.2 Abbreviations
- 3.3 Bearing of Four Conner
- 3.4 Systematically Resistance of Raised Access Floor
- 4 Requirements
- 4.1 Relation between the Host and the Device
- 4.2 UTI Interface
- 4.3 Requirements for the Physical Layer of UTI Device
- 4.4 Transport Stream Interface
- 4.5 Command Data Interface
- 4.6 Characteristic Requirements for UTI Physical Layer
- 5 Instruments, equipment, and materials
- 5.1 Diagram of Module in Connection with Host
- 5.2 DTV-CI Interface
- 5.4 Command Interface
- 5.5 Physical Requirement
- 5.6 UTI-HTU
- 5.7 Measuring Condition
- 6 Sample processing and determination
- 6.1 TSI-Physical, Link Layers
- 6.2 TSI-Transport Layer
- 6.3 TSI - Upper Layers
- 6.4 Initialization Test
- 6.5 Resource Manager Test
- 6.6 Application Information Resource Test
- 6.7 Date-time Information Resource Test
- 6.8 CA Application Resource Test
- 6.9 UTI Device TS Test
- 7 Marking, packaging, transportation and storage
- 7.1 Data Structure
- 7.2 Transport Layer
- 7.3 Session Layer
- 7.4 Resource of Resource Manager
- 7.5 Application Information Resources
- 7.6 Date and Time Information Resources
- 7.9 Hot Plugging/Unplugging Test
- 8 Test report
- 8.1 Introduction
- 8.2 Resources
- 8.3 Application Protocol Data Units (APDU)
- 8.4 System Management Resources
- 8.5 Host Control and Information Resources
- 8.6 Man-Machine Interface Resource
- 8.7 Resource Identifiers and Application Object Tags
- 9.1 Electromagnetic Compatibility
- 9.2 Safety
- 9.3 Materials
1 Foreword
SJ/T 11448-2013 was issued by Ministry of Industry and Information Technology on 17 October 2013.
The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 39 pages in English translation.
2 Scope Preview
This standard applies to new construction, renovation, expansion planning and design software park project. This standard applies to construction land size of 200 hectares within the park.
SJ/T 11448-2013 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,655 other SJ/T standards.
Of the 576 SJ/T standards that do carry an ICS number, 222 (39%) fall under ICS 31, in the field of electronics.
3 About this standard
Sector: Electronics Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 39 pages (approximate)
Chinese original: about 58,570 characters
4 Related standards
Standards on related subjects:
JB 2293-1978 — Wind tunnel test method of radiator of automobile and tractor
SJ/T 12063-2026 — Test method of electric double layer capacitor system for road vehicles
5 Classification and status
Prefix SJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 39 pages — is available in the English PDF.
How to Download SJ/T 11448-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SJ/T 12063-2026 — Test method of electric double layer capacitor system for road vehicles
SJ/T 12097-2026 — Information technology - Software bill of materials data format specification
SJ/T 12099-2026 — Technical specifications for industrial AI visual appearance inspection systems
SJ/T 11448-2013
$1,224.00