SJ/T 11432-2012General specification of stabilized power supplies, DC output (English PDF)
直流稳定电源通用规范第1部分:术语和定义
This is a limited preview
Buy now to download the full PDF (85 pages)
Need quotation for your management?
Get a formal quotation for SJ/T 11432-2012 in 30 minutes.
Issued by
Ministry of Industry and Information Technology
Level / Type
National · Recommended
Issue date
January 1, 2012
Implementation date
January 1, 2012
Scope
SJ/T 11432-2012 is the English-translated version of 直流稳定电源通用规范第1部分:术语和定义.
SJ/T 11432-2012 is the Chinese standard "General specification of stabilized power supplies, DC output". This standard is applicable to stable power supplies that derive power from AC or DC sources and provide DC output power for the following purposes, but are not limited to: computers; telecommunications; laboratories; industrial equipment.
This standard does not apply to calibration sources for electrical measurements. It was issued by Ministry of Industry and Information Technology.
Found what you need?
Document preview — SJ/T 11432-2012
National Standard of the People's Republic of China
- ICS
- 29.200
- Classification
- K81
Issued by: Ministry of Industry and Information Technology
Contents
- [Preview only]
- 1 Scope
- 1.1 Subject Contents
- 1.2 Application Scope
- 2 Normative references
- 3 Terms and Definitions
- 3.1 Height of Raised Access Floor
- 3.2 Abbreviations
- 3.3 Bearing of Four Conner
- 3.4 Systematically Resistance of Raised Access Floor
- 4 Requirements
- 4.1 Relation between the Host and the Device
- 4.2 UTI Interface
- 4.3 Requirements for the Physical Layer of UTI Device
- 4.4 Transport Stream Interface
- 4.5 Command Data Interface
- 4.6 Characteristic Requirements for UTI Physical Layer
- 5 Instruments, equipment, and materials
- 5.1 Diagram of Module in Connection with Host
- 5.2 DTV-CI Interface
- 5.4 Command Interface
- 5.5 Physical Requirement
- 5.6 UTI-HTU
- 5.7 Measuring Condition
- 6 Sample processing and determination
- 6.1 TSI-Physical, Link Layers
- 6.2 TSI-Transport Layer
- 6.3 TSI - Upper Layers
- 6.4 Initialization Test
- 6.5 Resource Manager Test
- 6.6 Application Information Resource Test
- 6.7 Date-time Information Resource Test
- 6.8 CA Application Resource Test
- 6.9 UTI Device TS Test
- 7 Marking, packaging, transportation and storage
- 7.1 Data Structure
- 7.2 Transport Layer
- 7.3 Session Layer
- 7.4 Resource of Resource Manager
- 7.5 Application Information Resources
- 7.6 Date and Time Information Resources
- 7.9 Hot Plugging/Unplugging Test
- 8 Test report
- 8.1 Introduction
- 8.2 Resources
- 8.3 Application Protocol Data Units (APDU)
- 8.4 System Management Resources
- 8.5 Host Control and Information Resources
- 8.6 Man-Machine Interface Resource
- 8.7 Resource Identifiers and Application Object Tags
- 9.1 Electromagnetic Compatibility
- 9.2 Safety
- 9.3 Materials
1 Foreword
SJ/T 11432-2012 was issued by Ministry of Industry and Information Technology on 24 May 2012.
The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 85 pages in English translation.
2 Scope Preview
This standard is applicable to stable power supplies that derive power from AC or DC sources and provide DC output power for the following purposes, but are not limited to: computers; telecommunications; laboratories; industrial equipment. This standard does not apply to calibration sources for electrical measurements.
SJ/T 11432-2012 falls under ICS 29.200, in the field of electrical engineering.
This catalogue holds 55 other SJ/T standards in that field.
In this catalogue, SJ/T standards carry edition years from 1980 to 2026.
3 About this standard
Sector: Electronics Industry Standard (Recommended)
Issued by: Ministry of Industry and Information Technology
English translation: about 85 pages (approximate)
Chinese original: about 128,119 characters
4 Related standards
Standards on related subjects:
NB/T 10902-2021 — Technical conditions and installation requirements of 20kW and below non-on-board charger
JB/T 11137-2011 — General requirements for lithium-ion battery assemblies
JB/T 11142-2011 — General requirements for lithium-ion battery chargers
5 Classification and status
International classification (ICS): 29.200
Chinese Standard Classification (CCS): K 81
Prefix SJ/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 85 pages — is available in the English PDF.
How to Download SJ/T 11432-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
SJ/T 12063-2026 — Test method of electric double layer capacitor system for road vehicles
SJ/T 12097-2026 — Information technology - Software bill of materials data format specification
SJ/T 12099-2026 — Technical specifications for industrial AI visual appearance inspection systems
SJ/T 11432-2012
$2,120.00