Valid

SJ/T 11269-2002The type designation for picture tube bulbs (English PDF)

显像管玻壳型号命名方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (8 pages)

Need quotation for your management?

Get a formal quotation for SJ/T 11269-2002 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

May 23, 2002

Implementation date

May 23, 2002

Scope

SJ/T 11269-2002 is the English-translated version of 显像管玻壳型号命名方法.

SJ/T 11269-2002 is the Chinese standard "The type designation for picture tube bulbs". This standard specifies the picture tube (including display tube) Bulb (hereinafter referred to as bulb) of the type designation.

This standard applies to all types of funnels (bulb including glass screen and funnel) model name. Issued on 2002-05-23, in force from 2002-05-23.

Found what you need?

Document preview — SJ/T 11269-2002

National Standard of the People's Republic of China

ICS
31.100
Classification
L38

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Subject Contents
  • 1.2 Application Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 3.1 Height of Raised Access Floor
  • 3.2 Abbreviations
  • 3.3 Bearing of Four Conner
  • 3.4 Systematically Resistance of Raised Access Floor
  • 4 Requirements
  • 4.1 Relation between the Host and the Device
  • 4.2 UTI Interface
  • 4.3 Requirements for the Physical Layer of UTI Device
  • 4.4 Transport Stream Interface
  • 4.5 Command Data Interface
  • 4.6 Characteristic Requirements for UTI Physical Layer
  • 5 Instruments, equipment, and materials
  • 5.1 Diagram of Module in Connection with Host
  • 5.2 DTV-CI Interface
  • 5.4 Command Interface
  • 5.5 Physical Requirement
  • 5.6 UTI-HTU
  • 5.7 Measuring Condition
  • 6 Sample processing and determination
  • 6.1 TSI-Physical, Link Layers
  • 6.2 TSI-Transport Layer
  • 6.3 TSI - Upper Layers
  • 6.4 Initialization Test
  • 6.5 Resource Manager Test
  • 6.6 Application Information Resource Test
  • 6.7 Date-time Information Resource Test
  • 6.8 CA Application Resource Test
  • 6.9 UTI Device TS Test
  • 7 Marking, packaging, transportation and storage
  • 7.1 Data Structure
  • 7.2 Transport Layer
  • 7.3 Session Layer
  • 7.4 Resource of Resource Manager
  • 7.5 Application Information Resources
  • 7.6 Date and Time Information Resources
  • 7.9 Hot Plugging/Unplugging Test
  • 8 Test report
  • 8.1 Introduction
  • 8.2 Resources
  • 8.3 Application Protocol Data Units (APDU)
  • 8.4 System Management Resources
  • 8.5 Host Control and Information Resources
  • 8.6 Man-Machine Interface Resource
  • 8.7 Resource Identifiers and Application Object Tags
  • 9.1 Electromagnetic Compatibility
  • 9.2 Safety
  • 9.3 Materials

1 Foreword

SJ/T 11269-2002 was issued by Ministry of Industry and Information Technology on 23 May 2002 and took effect the same day.

The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 8 pages in English translation.

2 Scope Preview

This standard specifies the picture tube (including display tube) Bulb (hereinafter referred to as bulb) of the type designation. This standard applies to all types of funnels (bulb including glass screen and funnel) model name.

SJ/T 11269-2002 falls under ICS 31.100, in the field of electronics.

This catalogue holds 221 other SJ/T standards in that field.

In this catalogue, SJ/T standards carry edition years from 1980 to 2026.

3 About this standard

Sector: Electronics Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 8 pages (approximate)

Chinese original: about 5,599 characters

4 Related standards

Standards on related subjects:

GB/T 12631-2017 — Test method for resistance of conductors of printed boards

SJ 21374-2018 — High reliability traveling wave tube slow wave component clamping process control requirements

SJ 21373-2018 — Highly reliable traveling wave tube attenuator manufacturing process control requirements

SJ 21372-2018 — Highly reliable traveling wave tube thermal measurement process control requirements

5 Classification and status

International classification (ICS): 31.100

Chinese Standard Classification (CCS): L 38

Prefix SJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.

How to Download SJ/T 11269-2002

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
8 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

SJ/T 11269-2002

$55.00