Valid

SJ/T 11230-2001General specification for integrated circuit cards. Part 4: Interface device fundamental API specification (English PDF)

集成电路卡通用规范第4部分：接口设备基本应用编程接口规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (14 pages)

Need quotation for your management?

Get a formal quotation for SJ/T 11230-2001 in 30 minutes.

Issued by

Ministry of Industry and Information Technology

Level / Type

National · Recommended

Issue date

April 13, 2001

Implementation date

May 1, 2001

Scope

SJ/T 11230-2001 is the English-translated version of 集成电路卡通用规范第4部分：接口设备基本应用编程接口规范.

SJ/T 11230-2001 is the Chinese standard "General specification for integrated circuit cards. Part 4: Interface device fundamental API specification". This standard specifies the interface device must support application-oriented device (APD) (see 3.

1) of the basic application programming interfaces. It applies in embedded applications, the personal computer system IC card interface device (IFD) (see 3. 4) and software.

Compliance with this criterion Integrated Circuit Card (ICC) is physically and electrically shall meet SJ/T 11220 and SJ/T 11221 standard. These standards provide the integrated circuit card (ICC) of the physical properties and electrical characteristics defined in detail. Issued on 2001-04-13, in force from 2001-05-01.

Found what you need?

Document preview — SJ/T 11230-2001

National Standard of the People's Republic of China

ICS: 35.240.15
Classification: L64

[Preview only]
1 Scope
1.1 Subject Contents
1.2 Application Scope
2 Normative references
3 Terms and Definitions
3.1 Height of Raised Access Floor
3.2 Abbreviations
3.3 Bearing of Four Conner
3.4 Systematically Resistance of Raised Access Floor
4 Requirements
4.1 Relation between the Host and the Device
4.2 UTI Interface
4.3 Requirements for the Physical Layer of UTI Device
4.4 Transport Stream Interface
4.5 Command Data Interface
4.6 Characteristic Requirements for UTI Physical Layer
5 Instruments, equipment, and materials
5.1 Diagram of Module in Connection with Host
5.2 DTV-CI Interface
5.4 Command Interface
5.5 Physical Requirement
5.6 UTI-HTU
5.7 Measuring Condition
6 Sample processing and determination
6.1 TSI-Physical, Link Layers
6.2 TSI-Transport Layer
6.3 TSI - Upper Layers
6.4 Initialization Test
6.5 Resource Manager Test
6.6 Application Information Resource Test
6.7 Date-time Information Resource Test
6.8 CA Application Resource Test
6.9 UTI Device TS Test
7 Marking, packaging, transportation and storage
7.1 Data Structure
7.2 Transport Layer
7.3 Session Layer
7.4 Resource of Resource Manager
7.5 Application Information Resources
7.6 Date and Time Information Resources
7.9 Hot Plugging/Unplugging Test
8 Test report
8.1 Introduction
8.2 Resources
8.3 Application Protocol Data Units (APDU)
8.4 System Management Resources
8.5 Host Control and Information Resources
8.6 Man-Machine Interface Resource
8.7 Resource Identifiers and Application Object Tags
9.1 Electromagnetic Compatibility
9.2 Safety
9.3 Materials

1 Foreword

SJ/T 11230-2001 was issued by Ministry of Industry and Information Technology on 13 April 2001 and has been in force since 1 May 2001.

The SJ/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 14 pages in English translation.

2 Scope Preview

This standard specifies the interface device must support application-oriented device (APD) (see 3. 1) of the basic application programming interfaces. It applies in embedded applications, the personal computer system IC card interface device (IFD) (see 3. 4) and software. Compliance with this criterion Integrated Circuit Card (ICC) is physically and electrically shall meet SJ/T 11220 and SJ/T 11221 standard. These standards provide the integrated circuit card (ICC) of the physical properties and electrical characteristics defined in detail.

SJ/T 11230-2001 falls under ICS 35.240.15, in the field of information technology.

This catalogue holds 116 other SJ/T standards in that field.

In this catalogue, SJ/T standards carry edition years from 1980 to 2026.

3 About this standard

Sector: Electronics Industry Standard (Recommended)

Issued by: Ministry of Industry and Information Technology

English translation: about 14 pages (approximate)

Chinese original: about 20,265 characters

4 Related standards

Standards on related subjects:

GB/T 38668-2020 — Intelligent manufacturing－Radio frequency identification system—General technical requirements

GB/T 37720-2019 — Identification cards—Chip technical requirements for financial IC card

GB/T 29768-2013 — Information technology - Radio frequency identification - Air interface protocol at 800/900 MHz

SJ/Z 11648-2025 — Application guide for radio frequency identification technology inwarehousing business

SJ/T 11738-2019 — Application model of anti-counterfeiting of bottled wine based on radio frequency identification

SJ/T 11649.1-2016 — HD disc playback system - Part 1: Technical requirements CD-ROM

5 Classification and status

International classification (ICS): 35.240.15

Chinese Standard Classification (CCS): L 64

Prefix SJ/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.

How to Download SJ/T 11230-2001

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.