YS/T — National Recommended
Found: 3795 — page 70 of 80
6 pages
YS/T 610-2006 — Overglaze paste
National·Recommended
Valid$105.00
PDF
YS/T 611-2006 — Electrode paste used for PTC ceramic
National·Recommended
Superseded$105.00
PDF
YS/T 612-2006 — Paste for solar cell
National·Recommended
Superseded$289.00
5 pages
YS/T 613-2006 — Resistor paste for carbon film potentiometer
National·Recommended
Valid$145.00
PDF
YS/T 614-2006 — Silver palladium thick film conductor paste
National·Recommended
Superseded$145.00
PDF
YS/T 615-2006 — Copper rods and bars for electrical purposes
National·Recommended
Superseded$135.00
PDF
YS/T 616-2006 — Ceramic-medium filter
National·Recommended
Superseded$85.00
PDF
YS/T 63.1-2006 — Carbonaceous materials used in the production of aluminium. Part 1: Cathodic pastes. Preparation of baked test pieces, determination of loss on baking and apparent density after ramming
National·Recommended
Superseded$195.00
PDF
YS/T 63.10-2006 — Carbonaceous materials used in the production of aluminium. Part 10: Determination of the air permeability
National·Recommended
Superseded$249.00
PDF
YS/T 63.11-2006 — Carbonaceous materials used in the production of aluminium. Part 11: Sidewall blocks and prebaked anodes. Determination of the reactivity to air. Loss in mass method
National·Recommended
Superseded$105.00
PDF
YS/T 63.12-2006 — Carbonaceous materials used in the production of aluminium. Part 12: Prebaked anodes. Determination of the reactivity to carbon dioxide. Loss in mass method
National·Recommended
Superseded$135.00
PDF
YS/T 63.13-2006 — Carbonaceous materials used in the production of aluminium-Part 13: Determination of youngmodulus-Statical modulus method
National·Recommended
Superseded$199.00
PDF
YS/T 63.14-2006 — Carbonaceous materials used in the production of aluminium. Part 14: Determination of bending/shear stength by a three-point method
National·Recommended
Superseded$145.00
PDF
YS/T 63.15-2006 — Carbonaceous materials used in the production of aluminium. Part 15: Determination of compressive strength
National·Recommended
Superseded$169.00
PDF
YS/T 63.16-2006 — Carbonaceous materials used in the production of aluminium. Part 16: Analysis using an X-ray fluorescence method
National·Recommended
Superseded$105.00
PDF
YS/T 63.17-2006 — Carbonaceous materials used in the production of aluminium. Part 17: Determination of volatile matter content
National·Recommended
Superseded$55.00
PDF
YS/T 63.18-2006 — Carbonaceous materials used in the production of aluminium. Part 18: Determination of water content
National·Recommended
Superseded$119.00
PDF
YS/T 63.19-2006 — Carbonaceous materials used in the production of aluminium. Part 19: Determination of ash content
National·Recommended
Superseded$209.00
PDF
YS/T 63.2-2006 — Carbonaceous materials used in the production of aluminium. Part 2: Cathode blocks and Prebaked anodes. Determination of electrical resistivity at ambient temperature
National·Recommended
Superseded$85.00
PDF
YS/T 63.20-2006 — Carbonaceous materials used in the production of aluminium. Part 20: Determination of sulfur content
National·Recommended
Superseded$130.00
PDF
YS/T 63.3-2006 — Carbonaceous materials used in the production of aluminium. Part 3: Determination of the thermal conductivity using a comparative method
National·Recommended
Superseded$85.00
PDF
YS/T 63.4-2006 — Carbonaceous materials used in the production of aluminium. Part 4: Determination of the thermal expansion coefficient
National·Recommended
Superseded$145.00
PDF
YS/T 63.5-2006 — Carbonaceous materials used in the production of aluminium. Part 5: Cathode blocks. Determination of expansion due to sodium penetration with application of pressure
National·Recommended
Superseded$85.00
PDF
YS/T 63.6-2006 — Carbonaceous materials used in the production of aluminium. Part 6: Determination of open porosity using a hydrostatic method
National·Recommended
Superseded$199.00
PDF
YS/T 63.7-2006 — Carbonaceous materials used in the production of aluminium. Part 7: Determination of apparent density using a dimensions method
National·Recommended
Superseded$70.00
PDF
YS/T 63.8-2006 — Carbonaceous materials used in the production of aluminium. Part 8: Determination of the density in xylene by a pyknometric method
National·Recommended
Superseded$105.00
PDF
YS/T 63.9-2006 — Carbonaceous materials used in the production of aluminium. Part 9: Determination of truth density by helium pyknometry method
National·Recommended
Superseded$169.00
PDF
YS/T 79-2006 — Brazed cemented carbide inserts for cutting tool
National·Recommended
Superseded$235.00
PDF
YS/T 81-2006 — High pure sponge platinum
National·Recommended
Superseded$125.00
PDF
YS/T 82-2006 — Basis platinum as spectral analysis
National·Recommended
Superseded$130.00
PDF
YS/T 83-2006 — Basis palladium as spectral analysis
National·Recommended
Superseded$130.00
PDF
YS/T 84-2006 — Basis iridium as spectral analysis
National·Recommended
Superseded$85.00
PDF
YS/T 85-2006 — Basis rhodium as spectral analysis
National·Recommended
Superseded$130.00
24 pages
YS/T 119.10-2005 — Methods for determination and calculation of heat balance of special equipments for alumina production. Part 10: Plate falling-film evaporator system
National·Recommended
Valid$375.00
7 pages
YS/T 119.11-2005 — Methods for determination and calculation of heat balance of special equipments for alumina production. Part 11: Tube prepare-high pressure autoclave system
National·Recommended
Valid$120.00
9 pages
YS/T 119.8-2005 — Methods for determination and calculation of heat balance of special equipments for alumina production. Part 8: Gaseity suspension calcine system
National·Recommended
Valid$150.00
12 pages
YS/T 119.9-2005 — Methods for determination and calculation of heat balance of special equipments for alumina production. Part 9: Fluidized baking-furnace system
National·Recommended
Valid$210.00
PDF
YS/T 287-2005 — Partially graphitiferous cathode carbon block for aluminium electrolysis
National·Recommended
Withdrawn$169.00
4 pages
YS/T 321-2005 — Bismuth concentrate
National·Recommended
Valid$55.00
PDF
YS/T 340-2005 — Nickel concentrate
National·Recommended
Superseded$40.00
5 pages
YS/T 41-2005 — Beryllium pieces
National·Recommended
Valid$70.00
PDF
YS/T 472.1-2005 — Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates. Determination of cadmium content. Flame atomic absorption spectrometry
National·Recommended
Valid$164.00
PDF
YS/T 472.2-2005 — Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates. Determination of chromium content. Flame atomic absorption spectrometry
National·Recommended
Valid$164.00
PDF
YS/T 472.3-2005 — Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates. Determination of mercury content. Hydride generation-atomic fluorescence spectrometry
National·Recommended
Valid$164.00
8 pages
YS/T 472.4-2005 — Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates. Determination of lead content. Flame atomic absorption spectrometry
National·Recommended
Valid$95.00
8 pages
YS/T 472.5-2005 — Methods for chemical analysis of nickel concentrates and cobalt sulfide concentrates. Determination of arsenic content. Hydride generation-atomic fluorescence spectrometry
National·Recommended
Valid$115.00
PDF
YS/T 473-2005 — Determination of impurity elements in gallium for industrial use-ICP-MS analytical method
National·Recommended
Superseded$209.00
PDF
YS/T 474-2005 — Determination of trace elements in high-purity gallium. ICP-MS analytical method
National·Recommended
Superseded$70.00