GB/T — National Recommended

Found: 76458 — page 1084 of 1593

PDF

GB/T 10001.2-2006 — Public information graphical symbols for use on sign - Part 2: Symbols for tourism and entertainment

National·Recommended
Superseded$390.00
PDF

GB/T 10001.5-2006 — Public information graphical symbols for use on sign - Part 5: Symbols for shopping

National·Recommended
Superseded$360.00
PDF

GB/T 10001.6-2006 — Public information graphical symbols for use on sign - Part 6: Symbols for medical treatment and health care

National·Recommended
Superseded$360.00
PDF

GB/T 10002.1-2006 — Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply

National·Recommended
Superseded$85.00
PDF

GB/T 10030-2006 — Blunt snout bream fry and fingerling

National·Recommended
Superseded$195.00
PDF

GB/T 10044-2006 — Welding electrodes and rods for cast iron

National·Recommended
Superseded$285.00
PDF

GB/T 10064-2006 — Methods of test for the determination of the insulation resistance of solid insulating materials

National·Recommended
Superseded$105.00
PDF

GB/T 10066.12-2006 — Test methods for electro-heat installations - Part 12: Infrared heating installations

National·Recommended
Superseded$360.00
11 pages

GB/T 10066.8-2006 — Test methods for electro-heat installations -- Part 8: Electroslag remelting furnaces

National·Recommended
Valid$270.00
19 pages

GB/T 10069.1-2006 — Measurement of airborne noise emitted by rotating electrical machines and the noise limits -- Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines

National·Recommended
Valid$125.00
45 pages

GB/T 10178-2006 — Industrial fans -- Performance testing in situ

National·Recommended
Valid$700.00
33 pages

GB/T 10236-2006 — Guide for compatibility and protection of interference effects between semiconductor convertors and power supply system

National·Recommended
Valid$505.00
24 pages

GB/T 10263-2006 — Environmental conditions and test procedures for nuclear radiation detectors

National·Recommended
Valid$435.00
PDF

GB/T 10346-2006 — General principle of inspection for Chinese spirits

National·Recommended
Superseded$145.00
PDF

GB/T 1040.1-2006 — Plastics - Determination of tensile properties - Part 1: General principles

National·Recommended
Superseded$420.00
PDF

GB/T 1040.2-2006 — Plastic - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic

National·Recommended
Superseded$225.00
10 pages

GB/T 1040.3-2006 — Plastics -- Determination of tensile properties -- Part 3: Test conditions for films and sheets

National·Recommended
Valid$25.00
20 pages

GB/T 1040.4-2006 — Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites

National·Recommended
Valid$75.00
PDF

GB/T 10429-2006 — Single-stage centripetal turbine torque converters - Types and basic parameters

National·Recommended
Superseded$85.00
PDF

GB/T 10478-2006 — Railway tank car for liquefied gases

National·Recommended
Superseded$570.00
8 pages

GB/T 10581-2006 — Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures

National·Recommended
Superseded$195.00
22 pages

GB/T 10586-2006 — Specification for damp heat testing chambers

National·Recommended
Valid$205.00
15 pages

GB/T 10587-2006 — Specifications for salt mist testing chambers

National·Recommended
Valid$225.00
13 pages

GB/T 10588-2006 — Specifications for mould growth testing chambers

National·Recommended
Valid$225.00
16 pages

GB/T 10590-2006 — Specifications for high and low temperature / low air pressure testing chambers

National·Recommended
Valid$195.00
15 pages

GB/T 10591-2006 — Specifications for high temperature / low air pressure testing chambers

National·Recommended
Valid$195.00
8 pages

GB/T 10700-2006 — Test methods for elastic moduli of fine ceramics (advanced ceramics, advanced technical ceramics) - Bending method

National·Recommended
Valid$105.00
PDF

GB/T 10781.1-2006 — Strong flavor Chinese spirits

National·Recommended
Superseded$205.00
PDF

GB/T 10781.2-2006 — Mild aromatic Chinese spirits

National·Recommended
Superseded$105.00
PDF

GB/T 10781.3-2006 — Rice aromatic Chinese spirits

National·Recommended
Superseded$255.00
PDF

GB/T 10782-2006 — General rule for preserved fruits

National·Recommended
Superseded$150.00
PDF

GB/T 10784-2006 — Classification of canned food

National·Recommended
Superseded$150.00
PDF

GB/T 10786-2006 — Analytical methods of canned food

National·Recommended
Superseded$165.00
PDF

GB/T 10802-2006 — General flexible polyether polyurethane cellular plastics

National·Recommended
Superseded$225.00
8 pages

GB/T 10807-2006 — Flexible cellular polymeric materials-Determination of hardness(indentation technique)

National·Recommended
Valid$65.00
8 pages

GB/T 10808-2006 — Flexible cellular polymeric materials -- Determination of tear strength

National·Recommended
Valid$65.00
8 pages

GB/T 10856-2006 — Double turbine torque converter-Specification

National·Recommended
Valid$135.00
7 pages

GB/T 10893.2-2006 — Compressed air dryers -- Part 2: Performance ratings

National·Recommended
Valid$105.00
PDF

GB/T 10919-2006 — Gauges for straight-sided splines

National·Recommended
Superseded$255.00
PDF

GB/T 10922-2006 — Gauges for pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads

National·Recommended
Superseded$345.00
PDF

GB/T 10944.1-2006 — Tool shanks with 7: 24 taper for automatic tool changers - Part 1: Shanks Nos. 40, 45 and 50 - Part 1: Dimensions and conicity tolerances

National·Recommended
Superseded$145.00
PDF

GB/T 10944.2-2006 — Tool shanks with 7: 24 taper for automatic tool changers - Shanks Nos. 40, 45 and 50 - Part 2: Technical specifications

National·Recommended
Superseded$125.00
PDF

GB/T 10945.1-2006 — Tool shanks with 7: 24 taper for automatic tool changers - Retention knobs for shanks Nos. 40, 45 and 50 - Part 1: Dimensions and mechanical characteristics

National·Recommended
Withdrawn$135.00
PDF

GB/T 10945.2-2006 — Tool shanks with 7: 24 taper for automatic tool changers - Retention knobs for shanks Nos. 40, 45 and 50 - Part 2: Technical specifications

National·Recommended
Superseded$209.00
8 pages

GB/T 10947-2006 — Taper shank twist drills with carbide tips

National·Recommended
Valid$135.00
8 pages

GB/T 10948-2006 — T-slot cutters with carbide tips

National·Recommended
Valid$109.00
8 pages

GB/T 10953-2006 — Cutting-off tools for turning with clamp tips

National·Recommended
Valid$95.00
13 pages

GB/T 10954-2006 — Turning tools for threads with clamp tips

National·Recommended
Valid$105.00