SB/T 10472-2012Technical requirements for commodity purchase and check of indoor decorative textiles (English PDF)

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009.

This standard replaces SB/T 10472-2008 "General Rules for the Acceptance of Textile Products for Interior Decoration", and SB/T 10472-2008 "Interior Decoration" the main changes in the General Rules for the Acceptance of Textile-like Goods are as follows.

--- Supplementary normative references (see Chapter 2, Chapter 2 of the 2008 edition);

--- Increased marketing procurement management requirements (see Chapter 4);

--- Revised the product acceptance management requirements, deleted the purchase acceptance flow chart (see Chapter 5, 2008 edition, Chapter 4);

--- Increased the requirement that no metal needles should remain in the finished product (see 6.2.9);

--- Increased the intrinsic quality acceptance of interior decorative textile products (see 6.3);

--- Added Appendix A "Indoor Decoration Textile Goods Acceptance Management Management Account" (see Appendix A);

--- The original Appendix A was changed to Appendix B, which increased the safety requirements for indoor and outdoor textile products for infants and young children (see Appendix B, 2008).

Appendix A).

This standard is managed by the Ministry of Commerce of the People's Republic of China.

This standard was jointly proposed by the Commercial Technology Quality Center and the China National Commercial Association's Needle Cotton Textile Product Quality Supervision, Inspection and Testing Center (Tianjin).

This standard is mainly drafted by. Commercial Technology Quality Center, China Commercial Federation, Needle Cotton Textile Product Quality Supervision, Inspection and Testing Center (Day Tianjin), Jiangsu Menglan Group Co., Ltd., Wuhan Product Quality Supervision and Inspection Institute.

1 Scope

This standard specifies the commodity classification, marketing procurement management requirements, commodity purchase acceptance management requirements and commodities for indoor decorative textile products.

Quality acceptance technical requirements.

This standard is applicable to the woven and knitted interior textile products of commercial and trading enterprises for bedding, hanging, covering and seating.

Goods acceptance management, other related products can refer to implementation.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.

Pieces. For undated references, the latest edition (including all amendments) applies to this document.

GB/T 250 gray color card for color measurement GB 5296.4 Instructions for use of consumer products - Part 4. Instructions for use of textiles and clothing GB 18383 General technical requirements for woven fiber products GB 18401 National Textile Products Basic Safety Technical Specifications GB/T 22704 Code of practice for the design and production of children's clothing that improves mechanical safety GB/T 22705 Children's rope and drawstring safety requirements SB/T 10579-2011 General inspection of goods SB/T 10787-2012 Textile Goods Acceptance Specification

3 Categories

Interior decoration textiles are divided into the following four categories according to their use.

a) Bedding category. fabric for bedding, including. sheets, bedspreads, mattresses, quilts, duvet covers, pillowcases, cushions, blankets, etc.;

b) hanging type; fabric for hanging products, including. fabrics for curtains,,, etc.;

c) Covering type. fabrics for loose covering fabrics, including. fabrics for sofa towels, tablecloths,, etc.;

d) Seat class. Fabrics for covering sofas and soft chairs, including. sofa covers, soft chair covers, soft beds for beds, etc.

4 Marketing Purchasing Management Requirements

4.1 Marketing enterprises shall sign procurement contract documents for indoor decorative textile products in compliance with laws and regulations, and stipulate corresponding purchase and sales contracts.

With the quality of the offer.

4.1.1 The quality of the purchase and sale contract should include the following.

a) Quantity offer. Small-supply enterprises should have a weekly supply capacity of 50-100 pieces (sets) for single-variable interior decorative textile products.

The medium-supply enterprise's weekly supply capacity for single-variable interior decorative textile products should reach 2~5 times of large-scale supply enterprises, and large-scale supply the weekly supply capacity of single-variety interior textile products of goods enterprises should reach 10 times of the supply capacity of small-supply enterprises.

the above.