SB/T 10065-2012Technical requirements of Bean sprouter (English PDF)
This is a limited preview
Buy now to download the full PDF (7 pages)
Need quotation for your management?
Get a formal quotation for SB/T 10065-2012 in 30 minutes.
Issued by
Ministry of Commerce of the People's Republic of China
Level / Type
National · Recommended
Issue date
January 1, 1970
Implementation date
January 1, 1970
Scope
SB/T 10065-2012 (Technical requirements of Bean sprouter) is available as an English-translated PDF.
SB/T 10065-2012 — This standard specifies the terms and definitions of the bean sprouts growth machine, technical conditions, test methods, inspection rules, and signs, packaging, transportation and Storage, etc. This standard applies to temperature-controlled bean sprouts (mung bean, soybean and other beans) growth machine, this standard does not apply to non-temperature-controlled bean sprouts growers.
Found what you need?
Document preview — SB/T 10065-2012
National Standard of the People's Republic of China
- ICS
- 67.260
- Classification
- X 99
- Replacing
- SB/T 10065-1992
Issued by: Ministry of Commerce of the People's Republic of China
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Working conditions
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard is a revision of SB/T 10065-1992 "Technical Conditions for Bean Sprout Growing Machine", this standard and SB/T 10065-1992 the main differences are as follows.
--- Added "terms and definitions";
--- All the technical requirements for the product are classified in the "Technical Requirements" chapter, and the terms listed in the "Technical Requirements" are reorganized.
And made corresponding additions and deletions;
--- Put all inspection methods into the "Test Methods" chapter, and in accordance with the "technical requirements" related content improvement, "test methods" it should be revised and arranged again;
--- Also modified the "inspection rules" related content.
This standard was proposed by the Ministry of Commerce of the People's Republic this standard is under the jurisdiction of the National Commercial Machinery Standardization Technical Committee.
This standard is mainly drafted by. Beijing Service Machinery Research Institute.
1 Scope
This standard specifies the terms and definitions of the bean sprouts growth machine, technical conditions, test methods, inspection rules, and signs, packaging, transportation and Storage, etc.
This standard applies to temperature-controlled bean sprouts (mung bean, soybean and other beans) growth machine, this standard does not apply to non-temperature-controlled bean sprouts growers.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
GB/T 3768 Acoustic sound pressure method for the determination of noise source sound power level (GB/T 3768-1996, eqvISO 3746..1995) GB 16798 Food Machinery Safety and Hygiene SB/T 227 Food Machinery General Technical Conditions Electrical Equipment Technical Requirements SB/T 228 food machinery general technical conditions surface painting SB/T 229-2007 General technical requirements for food machinery - Technical requirements for product packaging SB/T 231-2007 General technical conditions for food machinery, marking, transportation and storage SB/T 10291.1-2012 Food Machinery Terminology Part 1. Dietary Machinery Terminology
3 Terms and definitions
The following terms and definitions as defined in SB/T 10291.1-2012 apply to this document.
Rated output
The manufacturer's stated or nominal production.
4 Technical requirements
4.1 General requirements
4.1.1 The bean sprouts growth machine shall comply with the provisions of this standard and be manufactured in accordance with the drawings and technical documents approved by the prescribed procedures.
4.1.2 The parts and components used in the bean sprouts growth machine shall be inspected and qualified, and the purchased parts shall have the certificate of conformity.
It can be assembled after passing the inspection.
4.1.3 The overall layout of the bean sprouts growth machine design should conform to the principles of ergonomics, beautiful in appearance, easy to disassemble and easy to install, and easy to clean.
4.2 Working conditions
The bean sprouts growth machine should be able to work continuously and reliably under the following conditions.
a) ambient temperature 5 ° C ~ 40 ° C;
b) The relative humidity of the air is <=90%.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 7 pages — is available in the English PDF.
Referenced standards
How to Download SB/T 10065-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 16798-2023 — Food machinery safety requirements
GB/T 37680-2019 — Supply service of agricultural production means—Quality requirements of distribution service of agricultural production means
GB/T 37681-2019 — Heavy steel castings - General technical specification
Secure payment via Stripe
Payments accepted
SB/T 10065-2012
$214.00