Valid

RB/T 114-2014Energy management system - Requirements for certification on chemical enterprises manufacturing sodium carbonate, coking, rubber and plastic products and pharmaceuticals etc. (English PDF)

Preview PDF

This is a limited preview

Buy now to download the full PDF (42 pages)

Need quotation for your management?

Get a formal quotation for RB/T 114-2014 in 30 minutes.

Issued by

National Certification and Accreditation Administration

Level / Type

National · Recommended

Issue date

October 16, 2023

Implementation date

December 1, 2023

Scope

RB/T 114-2014 (Energy management system - Requirements for certification on chemical enterprises manufacturing sodium carbonate, coking, rubber and plastic products and pharmaceuticals etc.) is available as an English-translated PDF.

RB/T 114-2014 — This document specifies the energy management system for chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals (hereinafter referred to as "soda ash and other enterprises"): Require: This document is applicable to the establishment, implementation, maintenance and continuous improvement of the energy management system of soda ash and other enterprises: Energy management system certification: It is used as a reference for other relevant parties to evaluate the energy management system of soda ash and other enterprises:

Found what you need?

Document preview — RB/T 114-2014

National Standard of the People's Republic of China

ICS: 27.010
Classification: F 01
Replacing: RB/T 114-2014

Issued by: National Certification and Accreditation Administration

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 The environment in which the enterprise is located
5 Leadership
6 Planning
7 Support
8 Run
9 Performance Evaluation
10 Improvement
Appendix A (Informative) Basic information on energy management in chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals
Appendix B (Informative) Commonly used laws, regulations, standards and other relevant information on energy management in chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals
Required Documents List
Appendix C (Informative) Application examples of energy management system requirements for chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals --- Energy
Judges
References
Figure A:1 Schematic diagram of the ammonia-soda process
Figure A:2 Schematic diagram of the combined alkali production process
Figure A:3 Schematic diagram of the natural alkali process
Figure A:4 Schematic diagram of heavy soda ash process flow chart
Figure A:5 Schematic diagram of typical tire process flow
Figure A:6 Schematic diagram of a typical coking enterprise production process flow chart
Figure A:7 Schematic diagram of plastic processing (granulation) process flow
Figure A:8 Injection molding process flow chart
Figure A:9 Blow molding (extrusion) molding process flow chart
Figure A:10 Extrusion molding process flow chart
Figure A:11 Schematic diagram of typical production process flow of dry process (release paper process) synthetic leather
Figure A:12 Schematic diagram of typical production process of wet synthetic leather
Figure A:13 Schematic diagram of the process flow of pesticide APIs and pesticide intermediates
Figure A:14 Schematic diagram of a typical process flow of pesticide formulation
Figure A:15 Schematic diagram of typical process flow of pharmaceutical intermediates
Figure A:16 Schematic diagram of the production process of fermentation drugs (such as penicillin)
Figure A:17 Schematic diagram of the production process of aspirin
Figure A:18 Schematic diagram of dye process flow
Figure A:19 Schematic diagram of rubber adhesive process flow
Table B:1 Commonly used laws, regulations and other requirements for energy management in chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals
Table B:2 Main standard catalogues for energy management in chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals
Table C:1 Energy types and energy use processes in 2020
Table C:2 Data and proportion of various energy consumption in
Table C:3 Comparison of unit product consumption of various energies in 2020 and:2019
Table C:4 Limit values, advanced values and actual values of unit product energy consumption of existing soda ash production equipment in the past two years (light soda ash by combined soda process)
Contrast
Table C:5 List of main energy-consuming equipment
Table C:6 Examples of variables related to major energy use
Table C:7 Summary of energy metering devices
Table C:8 Plant-level energy performance parameter improvement targets

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1: Structure and drafting rules for standardization documents" Drafting:

This document is GB/T 23331-2020 "Energy Management System Requirements and Use Guide" in soda ash, rubber products, plastic products (including the specific requirements for the application of chemical enterprises such as finished leather, coking chemicals, dyes, pesticides, pharmaceutical intermediates, and pharmaceuticals are a revision of GB/T 23331-2020:

Refinement:

This document replaces RB/T 114-2014 "Energy Management System Certification Requirements for Soda Ash, Coking, Rubber and Plastic Products, Pharmaceutical and Other Chemical Enterprises" Compared with RB/T 114-2014, in addition to structural adjustments and editorial changes, the main technical changes are as follows:

a) The structure, core technical elements, common terms and definitions of GB/T 23331-2020 are adopted;

b) Added the environment in which the enterprise is located (see 4.1);

c) Management representative has been deleted (see 4.2:2 of the:2014 edition);

d) added measures to address risks and opportunities (see 6.1);

e) Added planning for energy data collection (see 6.6);

f) Added improvements (see 10.3);

g) The scope of the management system has been changed (see 4.3, 4:1:2 of the:2014 edition);

h) Changed the energy review (see 6.3, 4:4:3 of the:2014 edition);

i) The energy performance parameters have been changed (see 6.4, 4:4:5 of the:2014 edition);

j) Changed the energy benchmark (see 6.5, 4:4:4 of the:2014 edition);

k) Changes have been made to operational planning and control (see 8.1, 8:2, 8:3, and 4:5:5, 4:5:6, and 4:5:7 of the:2014 edition):

1 Scope

This document specifies the energy management system for chemical enterprises such as soda ash, coking, rubber and plastic products, and pharmaceuticals (hereinafter referred to as "soda ash and other enterprises"):

Require:

This document is applicable to the establishment, implementation, maintenance and continuous improvement of the energy management system of soda ash and other enterprises:

Energy management system certification: It is used as a reference for other relevant parties to evaluate the energy management system of soda ash and other enterprises:

2 Normative references

The contents of the following documents constitute the essential clauses of this document through normative references in this document:

For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to this document:

GB/T 2589 General rules for calculation of comprehensive energy consumption GB 17167 General rules for the allocation and management of energy metering instruments in energy-consuming units GB/T 21367 Requirements for the allocation and management of energy metering instruments in chemical enterprises GB/T 23331-2020 Energy Management System Requirements and Usage Guide

3 Terms and definitions

The terms and definitions defined in GB/T 23331-2020 and GB/T 2589 apply to this document:

4: The environment in which the enterprise is located

4.1 Understanding the organization and its environment

4.1.1 Enterprises should comply with the requirements of 4:1 of GB/T 23331-2020:

4.1.2 The enterprise shall identify the internal and external factors (positive or negative) that affect its energy performance and energy management system:

a) External factors include:

---National, local, industry, and superior unit goals, requirements, or standards, such as: energy control indicators issued by the competent authorities, unit Product energy consumption limit standards, elimination of outdated processes and high-energy-consuming equipment, etc:;

--- The cost or availability of the main energy sources used, the use of renewable energy, etc:;

--- Environmental and climatic factors, such as high temperature, sudden weather, etc:;

---Others, such as the impact of global greenhouse gases, carbon emissions trading, carbon peak, carbon neutrality, etc:

b) Internal factors include:

---Mission, vision and development strategy;

---Human resources, finance, energy costs, etc:;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 42 pages — is available in the English PDF.

Referenced standards

Normative references

How to Download RB/T 114-2014

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.