RB/T 009-2019General requirements for evaluation of high efficiency particulate air filtration device (English PDF)
高效空气过滤装置评价通用要求
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for RB/T 009-2019 in 30 minutes.
Issued by
National Certification and Accreditation Administration
Level / Type
National · Recommended
Issue date
June 26, 2019
Implementation date
July 1, 2019
Scope
RB/T 009-2019 is the English-translated version of 高效空气过滤装置评价通用要求.
RB/T 009-2019 — This standard specifies the types of high-efficiency air filtration devices, general evaluation requirements, pre-installation evaluation, on-site evaluation requirements after installation, filtration Requirements for on-site testing and verification of device performance and evaluation reports.
This standard applies to the evaluation of high-efficiency air filtration devices that remove aerosols.
Found what you need?
Document preview — RB/T 009-2019
National Standard of the People's Republic of China
- ICS
- 03.120.20
- Classification
- A 00
Issued by: National Certification and Accreditation Administration
Contents
- Preface
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Types and general requirements for evaluation of high efficiency air filter devices
- 5 Evaluation before installation
- 6 Site evaluation after installation
- 7 On-site inspection and verification of filter device performance
- 8 Evaluation report
- Appendix A (informative appendix) leak test method
- Appendix B (informative appendix) In-situ scanning leak detection method of high efficiency filter
- Appendix C (informative appendix) In-situ disinfection and effect evaluation method
- Reference
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed and managed by the National Certification and Accreditation Administration Committee.
Drafting organizations of this standard. China National Accreditation Center for Conformity Assessment, National Engineering and Technology Research Center for Biological Protection Equipment, China Agricultural Science College of Harbin Veterinary Research Institute, Jiangsu Provincial Center for Disease Control and Prevention, Chinese Academy of Building Sciences Co., Ltd.
Introduction
High-efficiency air filtration devices have various structures and are widely used in scientific research, biomedicine, environmental protection and other environmental facilities and equipment.
The quality of effective air filtration devices is related to the air quality and environmental safety in the controlled environment.
In order to solve the technical problems of the detection and evaluation of different types of high efficiency air filter devices, this standard can be used as various types of high efficiency air filter devices the basis of the evaluation is for the reference of the research and development, use and certification of high-efficiency air filtration devices.
For some specific products, it should also meet corporate standards and national regulations for such products.
General requirements for the evaluation of high-efficiency air filtration devices
1 Scope
This standard specifies the types of high-efficiency air filtration devices, general evaluation requirements, pre-installation evaluation, on-site evaluation requirements after installation, filtration Requirements for on-site testing and verification of device performance and evaluation reports.
This standard applies to the evaluation of high-efficiency air filtration devices that remove aerosols.
2 Normative references
The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this file. For undated references, the latest version (including all amendments) applies to this document.
GB 19489-2008 General requirements for laboratory biosafety GB 50346 Technical Code for Biological Safety Laboratory Building RB/T 199 Laboratory equipment biosafety performance evaluation technical specifications ISO 29464:2017 Air and other gas purification terms (Cleaningofair and othergases-Terminology) Technical Specifications for Disinfection of the Ministry of Health of the People's Republic of China (2002 Edition)
3 Terms and definitions
The following terms and definitions apply to this document.
High efficiency air filter an air filtration device equipped with a high efficiency air filter for the purpose of removing harmful aerosols in the air supply and exhaust for a specific controlled environment.
Controlled environment Specific areas where pollutants are controlled by prescribed methods.
Note. Rewrite GB/T 25916.1-2010, definition 3.1.9.
Aerosol
Relatively stable particles formed by solid or liquid particles with a particle size of generally 0.001 µm to 100 µm suspended in a gas medium Scattered system.
[GB 19489-2008, definition 2.1] 3.4 High efficiency air filter A filter used for air filtration with a minimum filtration efficiency of not less than 99.95% under the rated air volume.
Note. Rewrite ISO 29464:2017 and define 3.2.84.
effectiveness
Under the test conditions, the ratio of the count rate of the particles captured by the filter to the count rate of the upstream particles, expressed as a percentage.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
Referenced standards
How to Download RB/T 009-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 19489-2008 — Laboratories - General requirements for biosafety
GB 50346-2004 — Architectural and technical code for biosafety laboratories
GB 50346-2011 — Architectural and technical code for biosafety laboratories
RB/T 009-2019
$272.00