QC/T 829-2019Technical specification for diesel vehicle after-treatment systems (English PDF)
柴油车排气后处理系统技术条件
This is a limited preview
Buy now to download the full PDF (27 pages)
Need quotation for your management?
Get a formal quotation for QC/T 829-2019 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 11, 2019
Implementation date
April 1, 2020
Scope
QC/T 829-2019 is the English-translated version of 柴油车排气后处理系统技术条件.
QC/T 829-2019 is the Chinese automotive industry standard covering technical specification for diesel vehicle after-treatment systems. It was issued on 11 November 2019 and has been in force since 1 April 2020, replacing QC/T 829-2010.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2019 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — QC/T 829-2019
National Standard of the People's Republic of China
- Replacing
- QC/T 829-2010
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Technical requirements
- 4.1 Arrangement form
- 5 Test Methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection Rules
- 6.1 Test environment
- 7 Signs, documents, packaging, transportation and storage
- 8 Inspection report
- 9 Marks, packaging
1 Foreword
QC/T 829-2019 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 November 2019 and has been in force since 1 April 2020.
It replaces the earlier edition QC/T 829-2010.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
QC/T 829-2019 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,612 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 27 pages
4 Related standards
Other editions:
QC/T 829-2010 (earlier edition)
Standards on related subjects:
QC/T 824-2019 — Automotive rotational speed sensors
QC/T 895-2011 — Conductive on-board chargers for electric vehicles
QC/T 828-2010 — Technical specifications for automotive air-to-air charge air coolers
QC/T 821-2024 — Automotive temperature sensors
QC/T 823-2024 — Liquid level sensors for automobiles and motorcycles
5 Classification and status
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 27 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of QC/T 829
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 829-2019 | Technical specification for diesel vehicle after-treatment systems | current edition | Current |
| QC/T 829-2010 | Technical specification for diesel vehicle after-treatment systems | previous edition | Superseded |
This page sells the current edition, QC/T 829-2019. Earlier editions are listed for reference only.
How to Download QC/T 829-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 829-2019
$480.00