QC/T 804-2014Instrument panel assemblies and console assemblies for passenger cars (English PDF)
乘用车仪表板总成和副仪表板总成
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 804-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 14, 2014
Implementation date
April 1, 2015
Scope
QC/T 804-2014 is the English-translated version of 乘用车仪表板总成和副仪表板总成.
QC/T 804-2014 is the Chinese automotive industry standard covering instrument panel assemblies and console assemblies for passenger cars. It was issued on 14 October 2014 and has been in force since 1 April 2015, replacing QC/T 804-2008.
The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2014 edition.
The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — QC/T 804-2014
National Standard of the People's Republic of China
- Replacing
- QC/T 804-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative references
- 2.1 Terms
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Requirements
- 4.1 Arrangement form
- 5 Test methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection rules
- 6.1 Test environment
- 7 Marking, packaging, transportation and storage
1 Foreword
QC/T 804-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 14 October 2014 and has been in force since 1 April 2015.
It replaces the earlier edition QC/T 804-2008.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies requirements, test methods, inspection rules, and marking, packaging, transportation and storage of instrument panel assembly and console assembly for passenger cars. This standard applies to instrument panel assembly and console assembly, made by forming process, for passenger cars, but it does not apply to instruments, controls or electrical parts that installed on the assemblies, or decorative parts using water transfer printing, painting and electroplating.
QC/T 804-2014 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,612 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 Normative references
GB/T 250 — Grey scale for assessing change in color
GB 251 — Gray scale for assessing staining
GB/T 3922 — Textiles—Testing method for color fastness to perspiration
GB 8410 — Flammability of automotive interior materials
GB/T 9286 — Paint and varnishes—Cross cut test for films
GB 11552 — The interior fittings of passenger car
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
QC/T 804-2022 (later edition)
QC/T 804-2008 (earlier edition)
6 Classification and status
Chinese Standard Classification (CCS): T 26
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
Editions of QC/T 804
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 804-2014 | Instrument panel assemblies and console assemblies for passenger cars | current edition | Current |
| QC/T 804-2008 | Instrument panel assemblies and console assemblies for passenger cars | previous edition | Superseded |
This page sells the current edition, QC/T 804-2014. Earlier editions are listed for reference only.
How to Download QC/T 804-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 804-2014
$115.00