Valid

QC/T 70-2014Noise measurement method for engines of motorcycles and mopeds (English PDF)

摩托车和轻便摩托车发动机噪声测量方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 70-2014 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 6, 2014

Implementation date

October 1, 2014

Scope

QC/T 70-2014 is the English-translated version of 摩托车和轻便摩托车发动机噪声测量方法.

QC/T 70-2014 is the Chinese automotive industry standard covering noise measurement method for engines of motorcycles and mopeds. It was issued on 6 May 2014 and has been in force since 1 October 2014, replacing QC/T 70-1993.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2014 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — QC/T 70-2014

National Standard of the People's Republic of China

Replacing
QC/T 70-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Brake performance
  • 1.2 Heat fade and recovery of brake
  • 1.3 Line failure and booster failure
  • 1.4 Wear of brake linings (pads)
  • 2 Normative references
  • 3 Terms and definitions
  • 3.2 Abbreviations
  • 4 Technical requirements
  • 4.1 Arrangement form
  • 5 Test Methods
  • 5.1 Protocol stack
  • 5.2 Node state
  • 5.3 Transmission rate
  • 5.4 Connectivity
  • 5.5 Bit error rate
  • 5.6 Wiring harness fault diagnosis
  • 5.7 Electrical indexes
  • 6 Inspection Rules
  • 6.1 Test environment
  • 7 Signs, documents, packaging, transportation and storage
  • 8 Inspection report
  • 9 Marks, packaging

1 Foreword

QC/T 70-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.

It replaces the earlier edition QC/T 70-1993.

The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

QC/T 70-2014 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 1,612 other QC/T standards.

Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other editions:

QC/T 70-2026 (later edition)

QC/T 70-1993 (earlier edition)

Standards on related subjects:

GB/T 4570-2022 — Test method of durability for motorcycles and mopeds

GB/T 5359.1-2019 — Term for motorcycles and mopeds – Part 1: Types of vehicle

QC/T 68-2026 — Technical Specification of Magneto for Motorcycles and Mopeds

QC/T 60-2026 — Methods of running test on bench for most or cycles and mopeds

5 Classification and status

Chinese Standard Classification (CCS): T 81

Prefix QC/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of QC/T 70

EditionTitleRevisionStatus
QC/T 70-2014Noise measurement method for engines of motorcycles and mopedscurrent editionCurrent
QC/T 70-1993Noise measurement method for engines of motorcycles and mopedsprevious editionSuperseded

This page sells the current edition, QC/T 70-2014. Earlier editions are listed for reference only.

How to Download QC/T 70-2014

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

QC/T 70-2014

$235.00