QC/T 7-1992Numbering rules for automotive product design documents (English PDF)
汽车产品设计文件编号规则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 7-1992 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 21, 1992
Implementation date
June 1, 1993
Scope
QC/T 7-1992 is the English-translated version of 汽车产品设计文件编号规则.
QC/T 7-1992 is a recommended automotive industry standard of China that fixes the numbering rules for the design documents of automotive products. It sets out how a number is formed and assigned to each design document of a vehicle.
It applies to the numbering of automobile design documents, while enterprise standards, parts lists, drawings and change notices used in automotive product design fall outside it.
Those working on motorcycle products may follow it for reference. GB 9417 and ZB/T T04005 are quoted, and the standard carries the Chinese classification T40. Issued on 21 May 1992, it has applied since 1 June 1993.
Found what you need?
Document preview — QC/T 7-1992
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative references
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Technical requirements
- 4.1 Arrangement form
- 5 Test Methods
- 5.1 Protocol stack
- 5.2 Node state
- 5.3 Transmission rate
- 5.4 Connectivity
- 5.5 Bit error rate
- 5.6 Wiring harness fault diagnosis
- 5.7 Electrical indexes
- 6 Inspection Rules
- 6.1 Test environment
- 7 Signs, documents, packaging, transportation and storage
- 8 Inspection report
- 9 Marks, packaging
1 Foreword
QC/T 7-1992 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 21 May 1992 and has been in force since 1 June 1993.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended automotive industry standard of China that fixes the numbering rules for the design documents of automotive products. It sets out how a number is formed and assigned to each design document of a vehicle. It applies to the numbering of automobile design documents, while enterprise standards, parts lists, drawings and change notices used in automotive product design fall outside it. Those working on motorcycle products may follow it for reference. GB 9417 and ZB/T T04005 are quoted, and the standard carries the Chinese classification T40.
QC/T 7-1992 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,601 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 Normative references
GB 9417
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
QC/T 1159-2022 — Guidelines on evaluation of automobile industry green supply chain management
QC/T 1130-2021 — Fuel consumption test methods for methanol vehicles
QC/T 1131-2020 — Test methods for polycyclic aromatic hydrocarbons in automotive materials
QC/T 1280.1-2026 — Intelligent manufacturing of motor vehicle - Mass customization - Part 1: General requirements
QC/T 1279-2026 — Intelligent manufacturing of motor vehicle - - Function requirements for collaborative development platform
QC/T 1274-2026 — Road vehicle - Carbon emissions accounting and reporting for enterprises - End-of-life vehicles collecting and dismantling enterprises
6 Classification and status
Chinese Standard Classification (CCS): T 40
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
GB 9417
Similar standards
How to Download QC/T 7-1992
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
Secure payment via Stripe
Payments accepted
QC/T 7-1992
$209.00