Valid

QC/T 577-1999Measurement method for interior dimensions of passenger car compartments (English PDF)

轿车客厢内部尺寸测量方法

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for QC/T 577-1999 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

August 16, 1985

Implementation date

March 1, 1986

Scope

QC/T 577-1999 is the English-translated version of 轿车客厢内部尺寸测量方法.

QC/T 577-1999 is the Chinese automotive industry standard covering measurement method for interior dimensions of passenger car compartments. It was issued on 16 August 1985 and has been in force since 1 March 1986, replacing JB 4100-1985.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 1999 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — QC/T 577-1999

National Standard of the People's Republic of China

Replacing: JB 4100-1985

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

[Preview only]
1 Scope
1.1 Brake performance
1.2 Heat fade and recovery of brake
1.3 Line failure and booster failure
1.4 Wear of brake linings (pads)
2 Normative references
3 Terms and definitions
3.2 Abbreviations
4 Technical requirements
4.1 Arrangement form
5 Test Methods
5.1 Protocol stack
5.2 Node state
5.3 Transmission rate
5.4 Connectivity
5.5 Bit error rate
5.6 Wiring harness fault diagnosis
5.7 Electrical indexes
6 Inspection Rules
6.1 Test environment
7 Signs, documents, packaging, transportation and storage
8 Inspection report
9 Marks, packaging

1 Foreword

QC/T 577-1999 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 16 August 1985 and has been in force since 1 March 1986.

The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

QC/T 577-1999 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 1,612 other QC/T standards.

Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Classification and status

Prefix QC/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

QC/T 567-1999|GB/T 2978-2024|QC/T 795.1-2007|QC/T 795.2-2007|QC/T 969-2014|QC/T 757-2024

Editions of QC/T 577

Edition	Title	Revision	Status
QC/T 577-1999	Measurement method for interior dimensions of passenger car compartments	current edition	Current
JB 4100-1985	Measurement method for interior dimensions of passenger car compartments	previous edition	Superseded

This page sells the current edition, QC/T 577-1999. Earlier editions are listed for reference only.

How to Download QC/T 577-1999

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.