QC/T 311-2008Performance requirements and bench test methods for automotive hydraulic brake master cylinders (English PDF)
汽车液压制动主缸性能要求及台架试验方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 311-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2006
Implementation date
November 1, 2008
Scope
QC/T 311-2008 is the English-translated version of 汽车液压制动主缸性能要求及台架试验方法.
QC/T 311-2008 is the Chinese automotive industry standard covering performance requirements and bench test methods for automotive hydraulic brake master cylinders.
It was issued on 4 June 2006 and has been in force since 1 November 2008, replacing QC/T 311-1999. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 2008 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — QC/T 311-2008
National Standard of the People's Republic of China
- Replacing
- QC/T 311-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Brake performance
- 1.2 Heat fade and recovery of brake
- 1.3 Line failure and booster failure
- 1.4 Wear of brake linings (pads)
- 2 Normative references
- 2.1 Terms
- 3 Terms and definitions
- 3.2 Abbreviations
- 4 Product categories
- 5 Performance requirements
- 6 Test device
- 7 Sample and sample installation
- 8 Test methods
1 Foreword
QC/T 311-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2006 and has been in force since 1 November 2008.
It replaces the earlier edition QC/T 311-1999.
The QC/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard specifies the performance requirements and bench test methods of the automobile brake master cylinder. This standard is applicable to the series dual chamber brake master cylinder assemblies of automobiles (hereinafter referred to as "brake master cylinder"), and other types of brake master cylinders may be implemented by making reference thereto.
QC/T 311-2008 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 1,612 other QC/T standards.
Of the 409 QC/T standards that do carry an ICS number, 397 (97%) fall under ICS 43, in the field of road vehicle engineering.
3 Normative references
GB/T 10125 — "Corrosion Tests in Artificial Atmospheres-Salt Spray Tests" (eqv ISO 9227: 1990)
QC/T 572 — "Rules for Cleanliness of Automobile-Determination Method"
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
QC/T 311-2026 (later edition)
QC/T 311-2018 (later edition)
QC/T 311-1999 (earlier edition)
6 Classification and status
Chinese Standard Classification (CCS): T 24
Prefix QC/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of QC/T 311
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 311-2008 | Performance requirements and bench test methods for automotive hydraulic brake master cylinders | current edition | Current |
| QC/T 311-1999 | Performance requirements and bench test methods for automotive hydraulic brake master cylinders | previous edition | Superseded |
This page sells the current edition, QC/T 311-2008. Earlier editions are listed for reference only.
How to Download QC/T 311-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
QC/T 311-2008
$135.00