QB/T 1622.8-1992Stainless steel wares Cups (English PDF)
不锈钢器皿 杯
This is a limited preview
Buy now to download the full PDF (10 pages)
Need quotation for your management?
Get a formal quotation for QB/T 1622.8-1992 in 30 minutes.
Issued by
Light Industry ministry of People's Republic of China
Level / Type
National · Recommended
Issue date
November 10, 1992
Implementation date
July 1, 1993
Scope
QB/T 1622.8-1992 is the English-translated version of 不锈钢器皿 杯.
QB/T 1622.8-1992 — This standard specifies stainless cup's product classification, technical requirements, test method, inspection rules, as well as marking, packing, transportation and storage requirements.
This standard applies to ordinary cup formed by stainless steel plate stamping. Other related parts of stainless cup, such as body and cover may also refer to this standard.
Found what you need?
Document preview — QB/T 1622.8-1992
National Standard of the People's Republic of China
Issued by: Light Industry ministry of People's Republic of China
Contents
- 1 Subject content and scope3
- 2 Normative references3
- 3 Terms, symbols, codes3
- 4 Product classification4
- 5 Technical requirements5
- 6 Test method8
- 7 Inspection rules9
- 8 Symbol, package, transportation and storage10
- Additional Note10
1 Subject content and scope
This standard specifies stainless cup's product classification, technical requirements, test method, inspection rules, as well as marking, packing, transportation and storage requirements.
This standard applies to ordinary cup formed by stainless steel plate stamping. Other related parts of stainless cup, such as body and cover may also refer to this standard.
2 Normative references
GB 1031 Surface roughness parameters and their values GB 1404 Phenolic moulding materials GB 3280 Gold rolled stainless steel plate GB 6060.4 Roughness comparison specimens-Polished surfaces GB 6062 Stylus instruments for the measurement of surface roughness by the profile method-Profile recording instruments and profile meters by the system GB 9684 Hygienic Standard for stainless steel food containers and table wares QB/T 1622.1 Stainless utensils-Terms QB/T 1622.2 Stainless utensils-Product classification QB/T 1622.3 Stainless utensils-Inspection rules QB/T 1622.4 Stainless utensils-Symbol, package, transportation, storage
3 Terms, symbols and codes
3.1 The terms shall comply with the provisions of QB/T 1622.1.
3.2 The symbols, codes shall comply with Chapter 4 provisions of QB/T 1622.2.
5.4.2 Grade determination
a. Superior product. There is no more than 1 Unqualified Type C;
b. First-class product. There are no more than 2 Unqualified Type C;
c. Qualified product. There are no more than 1 Unqualified Type B and 1 Unqualified Type C, or 3 Unqualified Type C.
6 Test method
6.1 Specification
6.1.1 Use measuring glass or measuring cylinder to measure the capacity. The value
shall comply with the provision 4.2.
6.1.2 Use straight steel ruler or vernier caliper to measure the caliber. The value shall
comply with the provision 4.2.
6.2 Use performance
PLACE a weight which is 2 times as weight as the water of the cup INTO the cup. Use handle to lift up horizontally to not-less-than 0.8m. Still-maintain for 10min. Then take out the weight to perform full-water test for 10min. The result shall comply with provision 5.1.
6.3 Product quality requirements
6.3.1 Use measuring glass or measuring cylinder to measure folds, pits, and deflating.
The value shall comply with the provision 5.4.1.
6.3.2 Use steel tap or feeler gauge to measure scratches. The value shall comply with the provision 5.4.1.
6.3.3 Inspect the roughness of polished surface and sanding surface according to GB
6062 and GB 6060.4.The result shall comply with provision 5.4.1.
6.3.4 Use visual method, hand-touching method and feeler gauge to measure the edges. The result shall comply with provision 5.4.1.
6.3.5 Use visual method, hand-touching method to measure point welding, decorative
patterns and identification marking. The result shall comply with provision 5.4.1.
8 Symbol, package, transportation and storage
It shall comply with the provisions of QB/T 1622.4.
Additional Note.
This standard was proposed by Quality Standard Department of Light Industry Ministry.
This standard shall be centralized by National Center of Daily Hardware for Standardization.
Responsible drafting organizations of this standard. Yangjiang General Plant of Stainless Steel Utensils in Gangdong Province, Shanghai Factory of Stainless Steel Utensils, Fushun Industrial Company of Stainless Steel Products in Liaoning, and Tianjin Factory of Stainless Steel Utensils.
Main drafter of this standard. Chen Xianghua.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.
Referenced standards
Normative references
GB 1031 · GB 1404 · GB 3280 · GB 6060.4 · GB 6062 · QB/T 1622.1 · QB/T 1622.2 · QB/T 1622.3 · QB/T 1622.4
How to Download QB/T 1622.8-1992
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 1404.3-2008 — Plastics -- Phenolic powder moulding compounds -- Part 3: Requirements for selected moulding compounds
GB 14048.9-2008 — Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
GB 9684-2011 — National food safety standard -- Stainless steel products
Secure payment via Stripe
Payments accepted
QB/T 1622.8-1992
$45.00