GB/T Standards
Found: 49235 — page 931 of 1026
Valid
GB/T 3049-2006 — Chemical products for industrial use - General method for determination of iron content. 1, 10-Phenanthroline spectrophotometric method
National·Recommended
Instant delivery (0–9 sec)
$85.0011 pages
Valid
GB/T 3186-2006 — Paints, varnishes and raw materials for paints and varnishes -- Sampling
National·Recommended
Instant delivery (0–9 sec)
$75.0013 pages
Valid
GB/T 3314-2006 — General technical specifications for diesel locomotives
National·Recommended
Instant delivery (0–9 sec)
$85.007 pages
Valid
GB/T 3315-2006 — Test methods for diesel locomotives on completion of construction and before entry into service
National·Recommended
Instant delivery (0–9 sec)
$245.0014 pages
Valid
GB/T 3450-2006 — Noise limit and measurement inside driver's cabs of railway locomotive and powered car train-sets
National·Recommended
Instant delivery (0–9 sec)
$55.0015 pages
Valid
GB/T 3458-2006 — Tungsten Powder
National·Recommended
Instant delivery (0–9 sec)
$50.0015 pages
Superseded
GB/T 3535-2006 — Petroleum products -- Determination of pour point
National·Recommended
Instant delivery (0–9 sec)
$55.0016 pages
Valid
GB/T 3579-2006 — Cycle chains -- Characteristics and test methods
National·Recommended
Instant delivery (0–9 sec)
$145.0010 pages
Valid
GB/T 3618-2006 — Wrought aluminium and aluminium alloys tread sheets
National·Recommended
Instant delivery (0–9 sec)
$349.0015 pages
Valid
GB/T 3781.8-2006 — Acetylene black—Part 8: Determination of hydrochloric acid absorption number
National·Recommended
Instant delivery (0–9 sec)
$125.0015 pages
Superseded
GB/T 3810.3-2006 — Test methods of ceramic tiles -- Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density
National·Recommended
Instant delivery (0–9 sec)
$70.0018 pages
Valid
GB/T 3871.1-2006 — Agricultural tractors - Test procedures - Part 1: General requirements
National·Recommended
Instant delivery (0–9 sec)
$70.0015 pages
Valid
GB/T 3871.10-2006 — Agricultural tractors -- Test procedures -- Part 10: Low temperature starting
National·Recommended
Instant delivery (0–9 sec)
$85.006 pages
Valid
GB/T 3871.13-2006 — Agricultural tractor -- Test procedures -- Part 13: Measurement of exhaust smoke
National·Recommended
Instant delivery (0–9 sec)
$105.007 pages
Valid
GB/T 3871.14-2006 — Agricultural tractors -- Test procedures -- Part 14: Partial power PTO -- Non-mechanically transmitted power
National·Recommended
Instant delivery (0–9 sec)
$55.004 pages
Valid
GB/T 3871.16-2006 — Agricultural tractors -- Test procedures -- Part 16: Axle power determination
National·Recommended
Instant delivery (0–9 sec)
$105.007 pages
Valid
GB/T 3871.17-2006 — Agricultural tractors -- Test procedures -- Part 17: Engine air cleaner
National·Recommended
Instant delivery (0–9 sec)
$95.007 pages
Valid
GB/T 3871.19-2006 — Agricultural tractors -- Test procedures -- Part 19: Steering capability of wheeled tractors
National·Recommended
Instant delivery (0–9 sec)
$85.006 pages
Valid
GB/T 3871.2-2006 — Agricultural tractors - Test procedures - Part 2: Measurements of tractor parameters
National·Recommended
Instant delivery (0–9 sec)
$85.0015 pages
Valid
GB/T 3871.3-2006 — Agricultural tractors -- Test procedures -- Part 3: Power tests for power take-off
National·Recommended
Instant delivery (0–9 sec)
$105.0016 pages
Valid
GB/T 3871.6-2006 — Agricultural tractors -- Test procedures -- Part 6: Determination of braking performance
National·Recommended
Instant delivery (0–9 sec)
$215.0025 pages
Valid
GB/T 3871.8-2006 — Agricultural tractors -- Test procedures -- Part 8: Noise measurement
National·Recommended
Instant delivery (0–9 sec)
$165.0010 pages
Valid
GB/T 3871.9-2006 — Agricultural tractors -- Test procedures -- Part 9: Power tests for drawbar
National·Recommended
Instant delivery (0–9 sec)
$155.0015 pages
Valid
GB/T 3877-2006 — Molybdenum foil
National·Recommended
Instant delivery (0–9 sec)
$125.0015 pages
Valid
GB/T 3932.1-2006 — Test conditions for manually controlled milling machines with table of fixed height -- Testing of the accuracy -- Part 1: Machines with horizontal spindle (ISO 1984-1: 2001, IDT)
National·Recommended
Instant delivery (0–9 sec)
$300.0017 pages
Valid
GB/T 3932.2-2006 — Test conditions for manually controlled milling machines with table of fixed height -- Testing of the accuracy -- Part 2: Machines with vertical spindle (ISO 1984-2: 2001, IDT)
National·Recommended
Instant delivery (0–9 sec)
$215.0013 pages
Valid
GB/T 4169.1-2006 — Components of injection moulds for plastics - Part 1: Ejector pin
National·Recommended
Instant delivery (0–9 sec)
$95.0015 pages
Valid
GB/T 4169.10-2006 — Components of injection moulds for plastics - Part 10: Support pillar
National·Recommended
Instant delivery (0–9 sec)
$95.0015 pages
Valid
GB/T 4169.11-2006 — Components of injection moulds for plastics - Part 11: Round locating element
National·Recommended
Instant delivery (0–9 sec)
$90.0015 pages
Valid
GB/T 4169.12-2006 — Components of injection moulds for plastics - Part 12: Ejector guide bush
National·Recommended
Instant delivery (0–9 sec)
$90.0015 pages
Valid
GB/T 4169.13-2006 — Components of injection moulds for plastics — Part 13: Return pin
National·Recommended
Instant delivery (0–9 sec)
$90.0015 pages
Valid
GB/T 4169.14-2006 — Components of injection moulds for plastics - Part 14: Ejector guide pillar
National·Recommended
Instant delivery (0–9 sec)
$85.0015 pages
Valid
GB/T 4169.15-2006 — Components of injection moulds for plastics - Part 15: Flat ejector pin
National·Recommended
Instant delivery (0–9 sec)
$95.0015 pages
Valid
GB/T 4169.16-2006 — Components of injection moulds for plastics - Part 16: Shouldered ejector pin
National·Recommended
Instant delivery (0–9 sec)
$90.0015 pages
Valid
GB/T 4169.17-2006 — Components of injection moulds for plastics - Part 17: Ejector sleeve
National·Recommended
Instant delivery (0–9 sec)
$90.0015 pages
Valid
GB/T 4169.18-2006 — Components of injection moulds for plastics - Part 18: Locating ring
National·Recommended
Instant delivery (0–9 sec)
$85.008 pages
Valid
GB/T 4169.19-2006 — Components of injection moulds for plastics - Part 19: Sprue bush
National·Recommended
Instant delivery (0–9 sec)
$85.008 pages
Valid
GB/T 4169.2-2006 — Components of injection moulds for plastics - Part 2: Straight guide bush
National·Recommended
Instant delivery (0–9 sec)
$85.008 pages
Valid
GB/T 4169.20-2006 — Components of injection moulds for plastics - Part 20: Limit pin
National·Recommended
Instant delivery (0–9 sec)
$105.008 pages
Valid
GB/T 4169.21-2006 — Components of injection moulds for plastics - Part 21: Rectangular locating element
National·Recommended
Instant delivery (0–9 sec)
$85.008 pages
Valid
GB/T 4169.22-2006 — Components of injection moulds for plastics - Part 22: Round mould opening delayer
National·Recommended
Instant delivery (0–9 sec)
$90.0015 pages
Valid
GB/T 4169.23-2006 — Components of injection moulds for plastics - Part 23: Rectangular mould opening delayer
National·Recommended
Instant delivery (0–9 sec)
$90.0015 pages
Valid
GB/T 4169.3-2006 — Components of injection moulds for plastics - Part 3: Headed guide bush
National·Recommended
Instant delivery (0–9 sec)
$95.0015 pages
Valid
GB/T 4169.4-2006 — Components of injection moulds for plastics - Part 4: Headed guide pillar
National·Recommended
Instant delivery (0–9 sec)
$95.0015 pages
Valid
GB/T 4169.5-2006 — Components of injection moulds for plastics - Part 5: Shouldered guide pillar
National·Recommended
Instant delivery (0–9 sec)
$95.0015 pages
Valid
GB/T 4169.6-2006 — Components of injection moulds for plastics - Part 6: Spacer block
National·Recommended
Instant delivery (0–9 sec)
$95.0015 pages
Valid
GB/T 4169.7-2006 — Components of injection moulds for plastics - Part 7: Ejector plate
National·Recommended
Instant delivery (0–9 sec)
$85.0015 pages
Valid
GB/T 4169.8-2006 — Components of injection moulds for plastics — Part 8:Mould plate
National·Recommended
Instant delivery (0–9 sec)
$145.0015 pages