NB/T 31073-2015Code for acceptance of occupational safety and health of wind power projects (English PDF)

1 General provisions

1.0.1 In order to standardize and guide the special completion acceptance of labor safety and industrial hygiene of wind farm projects, this Specification is hereby formulated, in accordance with national laws, regulations, rules, standards, other requirements.

1.0.2 This Specification is applicable to the special completion acceptance of labor safety and industrial hygiene of newly built, rebuilt and expanded grid-connected onshore wind farm projects and offshore wind farm projects.

1.0.3 The scope of the special completion inspection and acceptance of the labor safety and industrial hygiene of the wind farm project, includes the safety protection facilities of the wind turbines involved in the wind farm project and the supporting voltage boosting equipment, current collection lines, booster stations, other auxiliary facilities of the wind farm.

1.0.5 For the special completion acceptance of the labor safety and industrial hygiene, of the wind farm project, the acceptance committee, which is composed of the presiding organization for acceptance and the safety supervision department where the project is located, shall carry out the acceptance work.

1.0.6 The project owner shall report the use of engineering safety facilities and major engineering incidents (accidents), to the presiding organization of acceptance, within 2 years, after the special completion acceptance of the labor safety and industrial hygiene.

1.0.7 The inspection acceptance of labor safety and industrial hygiene, of wind farm projects, shall not only comply with this Specification, but also comply with the current relevant national standards.

2 Terms

3 Acceptance conditions

3.0.1 The civil works, within the acceptance range, have been completed AND put into use, in accordance with the approved documents. The main part of the project has been completed and passed the fire protection inspection. It has been two months, since all the mechanical and electrical equipment has been put into operation.

3.0.2 When the project is constructed in phases, each phase of the project is completed and passed the fire protection inspection and acceptance.

3.0.4 The documents and materials, which are related to the acceptance, are complete.

4 Acceptance procedure

4.5.6 After the review and approval of the completion acceptance certification for the labor safety and industrial hygiene of wind farm project, the acceptance presiding organization shall submit it to the safety supervision department of the government; copy to the member units of the acceptance committee.

5 Main contents of acceptance

5.0.1 The on-site inspection of labor safety and industrial hygiene facilities mainly includes the following contents. […]

6 Compilation requirement and content of acceptance file

6.0.1 The design self-inspection report, supervision self-inspection report, construction and installation self-inspection report, construction operation self-inspection report of the completion acceptance, for the labor safety and industrial hygiene, shall be prepared by the design, supervision, construction, building operation organizations, respectively. Each organization shall be

6.0.4 The preparation of acceptance materials shall be organized by the project owner. The relevant units shall submit them on time, as required. The project owner shall check the completeness and standardization of the submitted acceptance documents.

6.0.5 The acceptance materials include technical documents AND materials for reference. Relevant units shall ensure the authenticity of the materials submitted by them; assume corresponding responsibilities. ENERGY INDUSTRY STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA