NB/T 31030-2012Specifications for Engineering Geological Investigation of Wind Power Projects (English PDF)
陆地和海上风电场工程地质勘察规范
This is a limited preview
Buy now to download the full PDF (38 pages)
Need quotation for your management?
Get a formal quotation for NB/T 31030-2012 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
October 29, 2012
Implementation date
March 1, 2013
Scope
NB/T 31030-2012 is the English-translated version of 陆地和海上风电场工程地质勘察规范.
NB/T 31030-2012 is the Chinese standard "Specifications for Engineering Geological Investigation of Wind Power Projects".
Its scope clause reads: 1.0.1 This standard is hereby formulated with a view to adapting to the rapid development of wind power engineering, standardizing the procedure and depth of engineering geological investigation of wind power plants, clarifying the investigation contents and technical requirements for each stage of wind power plant engineering investigation and improving the engineering geological investigation level of wind power plants. Its clauses include general provisions; terms and symbols.
Found what you need?
Document preview — NB/T 31030-2012
National Standard of the People's Republic of China
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword i
- 1 General provisions
- 2 Terms and symbols
- 2.1 Terms
- 2.2 Symbols
- 3 Basic requirements
- 4 Grading and classification of engineering geological investigation of wind power plants
- 4.1 Grading of engineering geological investigation
- 4.2 Classification of topography, landform and rock-soil of wind power plants
- 5 Engineering geological investigation in planning stage
- 5.1 General requirements
- 5.2 Investigation contents and requirements
- 6 Engineering geological investigation in prefeasibility study stage
- 6.1 General requirements
- 6.2 Investigation contents and requirements
- 7 Engineering geological investigation in feasibility study stage
- 7.1 General requirements
- 7.2 Investigation contents and requirements
- 8 Engineering geological investigation in bidding design stage
- 8.1 General requirements
- 8.2 Investigation and requirements of wind turbine generator position
- 8.3 Investigation and requirements of booster stations (substations)
- 8.4 Other engineering investigations and requirements
- 8.5 Investigation report
- 9 Engineering geological investigation in construction stage
- 9.1 General requirements
- 9.2 Review of engineering geology
- 9.3 Construction geology
- 10 Rock-soil tests
- 10.1 Laboratory tests
- 10.2 In-situ tests
- Annex A Classification and identification of rocks
- Annex B Classification and identification of soil
- Explanation of wording in this standard
- List of quoted standards
1 General provisions
1.0.1 This standard is hereby formulated with a view to adapting to the rapid development of wind power engineering, standardizing the procedure and depth of engineering geological investigation of wind power plants, clarifying the investigation contents and technical requirements for each stage of wind power plant engineering investigation and improving the engineering geological investigation level of wind power plants.
1.0.2
This standard specifies the procedures and working depth for engineering geological investigation of wind power plants, and clarifies the tasks, contents and technical requirements of investigation in each design stage.
1.0.3
This standard is applicable to the engineering geological investigation of grid-connected wind power plants.
1.0.4
In addition to this standard, the engineering geological investigation of wind power plants shall also comply with those specified in the current relevant standards of the state.
2 Terms and symbols
2.1 Terms
2.1.1 engineering geological investigation
activity of identifying, analyzing and evaluating the geological environment, engineering geological conditions, hydrogeological conditions and geotechnical mechanical characteristics of the construction site by virtue of the theories and methods of engineering geology and rock-soil engineering and compiling engineering investigation documents according to the requirements of construction projects
2.1.2 subgrade; foundation soils
rock-soil mass supporting the foundation
2.1.3 foundation
structure component transmitting various actions borne by the structure to the subgrade
2.1.4 exploratory hole
exploratory hole which is arranged to identify the property of main stress layer of the subgrade and meets the requirements of general routine problems such as the bearing pressure evaluation of subgrade (including pile foundation)
2.1.5 control exploratory hole
exploratory hole which is arranged to control the stratum structure and meets the stability and deformation evaluation requirements for site, foundation and foundation pit engineering
2.1.6 bearing pressure of subgrade
maximum load borne by the subgrade per unit area under the condition of meeting both strength and deformation requirements 2.1.7 characteristic value of bearing pressure of subgrade (fak) pressure value corresponding to the specified deformation in the linear deformation section of the subsoil pressure deformation curve measured by load test, of which the maximum value is the proportional threshold value or proportional limit value 2.1.8 standard value of a geotechnical parameter basic representative value of a geotechnical parameter, which is generally taken as 0.05 fractile of probability distribution
2.2 Symbols
2.2.1
Geotechnical physical properties and particle composition e - - void ratio;
n - - void ratio or porosity;
IL - - liquidity index;
IP - - plasticity index;
Sr - - saturation;
w - - water content or moisture content;
wL - - liquid limit;
wp - - plastic limit;
gamma - - gravity density (unit weight);
rho - - mass density (density);
rhod - - dry density.
2.2.2 Geotechnical strength deformation parameters
alpha - - compression coefficient;
Cc - - compression index;
Ce - - recompression index;
Cs - - swelling index;
E0 - - deformation modulus;
ED - - side expansion modulus;
Em - - lateral pressure modulus;
Es - - compression modulus;
pc - - preconsolidation pressure;
c - - cohesion;
p0 - - proportional threshold pressure for load test and initial pressure for lateral pressure test;
pf - - critical edge pressure for lateral pressure test;
pL - - ultimate pressure for lateral pressure test;
pu - - ultimate pressure for load test;
qu - - unconfined compressive strength;
tau - - shear strength;
Phi - - internal friction angle.
2.2.3 Cone penetration test and standard penetration test indexes
Rf - - friction-resistance ratio of static cone penetration;
fs - - side resistance of static cone penetration;
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 38 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download NB/T 31030-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 10186-2026 — Technical specification for power conversion equipment used in photovoltaic-storage systems
NB/T 11969-2026 — Guide for energy efficiency assessment of off-board conductive chargers for electric vehicles
NB/T 11970-2026 — Specification for operation safety evaluation of grid-connected electric vehicle charging facilities
NB/T 31030-2012
$590.00