NB/T 25004-2011Performance test code for moisture separator reheaters (English PDF)
汽水分离再热器性能试验规程
This is a limited preview
Buy now to download the full PDF (95 pages)
Need quotation for your management?
Get a formal quotation for NB/T 25004-2011 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
July 28, 2011
Implementation date
November 1, 2011
Scope
NB/T 25004-2011 is the English-translated version of 汽水分离再热器性能试验规程.
NB/T 25004-2011 is the Chinese energy industry standard that sets out how the performance of moisture separator reheaters is to be tested. It gives the basic requirements for the performance test of the moisture separator reheaters used with pressurized water reactor plant, and it applies to tests on that equipment.
The standard is a modified adoption of ASME PTC 12.4-2004. It also relies on ASME PTC 6-2004, ASME PTC 19.1-2005, ASME PTC 19.2-2004, ASME PTC 19.5-2004 and ISO 5167-2003. Issued on 28 July 2011, it has applied since 1 November 2011.
Found what you need?
Document preview — NB/T 25004-2011
National Standard of the People's Republic of China
- ICS
- 27.120
Issued by: National Energy Administration of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 Environmental conditions
- 4.2 Operating conditions during on-grid operation
- 4.3 Wind turbine conditions during off-grid power supply
- 4.4 Bearing current
- 4.5 Isolation insulation resistance
- 4.6 Performance requirements
- 4.7 Sensors
- 4.8 Electromagnetic compatibility requirements
- 4.9 Human-machine interaction
- 5 Test methods
- 5.1 Test requirements
- 5.2 Test principles and methods
- 6.1 Samples and interfaces
- 6.2 Technical requirements for test items
- 7 Inspection rules
- 7.1 Basic function test
- 7.2 Touch current test
- 7.3 Loading test
- 7.4 Braking test
- 7.5 Machine-side differential mode voltage dU/dt value
- 7.6 Temperature rise test
- 7.7 Converter module current sharing test
- 7.8 Filter capacitor switching current test
- 7.9 Filter capacitor operating current test
- 8 Product nameplate, marking, packaging, transportation and storage
- 9 Assembly alignment of weldments
1 Foreword
NB/T 25004-2011 was issued by National Energy Administration of the People's Republic of China on 28 July 2011 and has been in force since 1 November 2011.
The NB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 95 pages in English translation.
2 Scope Preview
This standard is the Chinese energy industry standard that sets out how the performance of moisture separator reheaters is to be tested. It gives the basic requirements for the performance test of the moisture separator reheaters used with pressurized water reactor plant, and it applies to tests on that equipment. The standard is a modified adoption of ASME PTC 12.4-2004. It also relies on ASME PTC 6-2004, ASME PTC 19.1-2005, ASME PTC 19.2-2004, ASME PTC 19.5-2004 and ISO 5167-2003.
NB/T 25004-2011 falls under ICS 27.120, in the field of energy and heat transfer engineering.
This catalogue holds 1,264 other NB/T standards in that field.
In this catalogue, NB/T standards carry edition years from 2009 to 2026.
3 Normative references
ISO 5167-2003
4 About this standard
Issued by: National Energy Administration of the People's Republic of China
English translation: about 95 pages
5 Related standards
Standards on related subjects:
NB/T 20015-2021 — Nuclear power plant simulators for use in operator training and examination
NB/T 20332-2015 — Construction requirements for prestressed concrete containments for pressurized water reactor nuclear power plants
NB/T 20325.1-2014 — Prestressing technology specification for safety containment of PWR nuclear power plants - Part 1: Material
NB/T 25005-2011 — The Code of Welding Repair of Steam Turbine Cylinder in Nuclear Power Plant
NB/T 25003-2011 — Regulations for Environmental Impact Assessment Report in Siting Phases of Nuclear Power Plants
NB/T 25001-2011 — Quality Assurance in Siting for Nuclear Power Plants
6 Classification and status
International classification (ICS): 27.120
Prefix NB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 95 pages — is available in the English PDF.
Referenced standards
Normative references
ISO 5167-2003
Similar standards
How to Download NB/T 25004-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 10186-2026 — Technical specification for power conversion equipment used in photovoltaic-storage systems
NB/T 11969-2026 — Guide for energy efficiency assessment of off-board conductive chargers for electric vehicles
NB/T 11970-2026 — Specification for operation safety evaluation of grid-connected electric vehicle charging facilities
NB/T 25004-2011
$720.00