NB/T 20011-2010Design Requirements for Nuclear Safety Related Steel Structure for Pressurized Water Reactor Nuclear Power Plant (English PDF)
压水堆核电厂核安全有关的钢结构设计要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 20011-2010 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
May 1, 2010
Implementation date
October 1, 2010
Scope
NB/T 20011-2010 is the English-translated version of 压水堆核电厂核安全有关的钢结构设计要求.
NB/T 20011-2010 is the Chinese standard "Design Requirements for Nuclear Safety Related Steel Structure for Pressurized Water Reactor Nuclear Power Plant". Its scope clause reads: This standard specifies the design requirements for nuclear safety related steel structure for pressure water reactor nuclear power plant.
This standard is applicable to the design of nuclear safety related steel structure for pressure water reactor nuclear power plant; as for other nuclear facilities, this standard may also be implemented by reference.
This standard is not applicable to components maintaining pressure in nuclear facility, such as containment steel liners, pressure vessels, valves, pumps, pipelines as well as supports and hangers, and it is not applicable to steel structure in steel-concrete composite structure, neither. Its clauses include terminologies and definitions.
Found what you need?
Document preview — NB/T 20011-2010
National Standard of the People's Republic of China
- Replacing
- EJ/T 1062-1998
Issued by: National Energy Administration of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative References
- 3 Terminologies and Definitions
- 4 General
- 5 Load-bearing Steel Structure Design
- 6 Design of Steel Linear and Anchoring System for Water Pool and Room
- 7 Design of Embedded Parts
- Appendix A (Informative) Performance Table of Common Steels
- Appendix B (Informative) Performance Table of Common Welding Materials
- Appendix C (Informative) Performance Table of High-strength Bolt
- References
1 Scope
This standard specifies the design requirements for nuclear safety related steel structure for pressure water reactor nuclear power plant.
This standard is applicable to the design of nuclear safety related steel structure for pressure water reactor nuclear power plant; as for other nuclear facilities, this standard may also be implemented by reference.
This standard is not applicable to components maintaining pressure in nuclear facility, such as containment steel liners, pressure vessels, valves, pumps, pipelines as well as supports and hangers, and it is not applicable to steel structure in steel-concrete composite structure, neither.
2 Normative References
The following documents for the application of this document are essential. Any dated reference, just dated edition applies to this document. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 700-1988 Carbon Structural Steels
GB/T 1591-1994 High Strength Low Alloy Structural Steels
GB/T 3811-2008 Design Rules for Cranes
GB/T 5313 Steel Plates With through-thickness Characteristics
GB/T 11352 Carbon Steel Castings for General Engineering Purpose
GB 50017-2003 Code for Design of Steel Structures
GB 50205-2001 Code for Acceptance of Construction Quality of Steel Structures
HAF 003 Requirements for Quality Assurance and Safety of Nuclear Power Plants
HAD 003/06 Quality Assurance in the Design of Nuclear Power Plants
3 Terminologies and Definitions
For the purposes of this document, the following terminologies and definitions apply.
3.1 Load and action
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of NB/T 20011
| Edition | Title | Revision | Status |
|---|---|---|---|
| NB/T 20011-2010 | Design Requirements for Nuclear Safety Related Steel Structure for Pressurized Water Reactor Nuclear Power Plant | current edition | Current |
| EJ/T 1062-1998 | Design Requirements for Nuclear Safety Related Steel Structure for Pressurized Water Reactor Nuclear Power Plant | previous edition | Superseded |
This page sells the current edition, NB/T 20011-2010. Earlier editions are listed for reference only.
How to Download NB/T 20011-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 10086-2025 — Regulations for Compiling Energy Conservation Reports for Wind Farm Projects
NB/T 10103-2025 — Technical Specifications for Micro-Site Selection in Wind Farm Projects
NB/T 10116-2025 — Recommended Practices for Reducing the Impact of Hydraulic Fracturing Operations on the Surface Environment
Secure payment via Stripe
Payments accepted
NB/T 20011-2010
$165.00