Valid

NB/T 20008.4-2012Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 4: Forged or Rolled Classes 1, 2 and 3 Nickel-Chromium-Iron Alloy Parts (English PDF)

压水堆核电厂用其他材料 第4部分:1、2、3 级镍-铬-铁合金锻、轧件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 20008.4-2012 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

January 6, 2012

Implementation date

April 6, 2012

Scope

NB/T 20008.4-2012 is the English-translated version of 压水堆核电厂用其他材料 第4部分:1、2、3 级镍-铬-铁合金锻、轧件.

NB/T 20008.4-2012 is the Chinese energy industry standard covering other Material for Pressurized Water Reactor Nuclear Power Plants, Part 4: Forged or Rolled Classes 1, 2 and 3 Nickel-Chromium-Iron Alloy Parts.

It was issued on 6 January 2012 and has been in force since 6 April 2012, replacing EJ/T 463-1999. The document is under the responsibility of the National Energy Administration.

This page is published from the official record of the 2012 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — NB/T 20008.4-2012

National Standard of the People's Republic of China

Replacing
EJ/T 463-1999

Issued by: National Energy Administration of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and Definitions
  • 4 General requirements
  • 4.1 Environmental conditions
  • 4.2 Basic principles
  • 4.3 Basic process
  • 5 Technical Requirements
  • 6 Test methods
  • 7 Inspection Rules
  • 8 Marking, packaging, transportation and storage
  • 9 Evaluation indicators

1 Foreword

NB/T 20008.4-2012 was issued by National Energy Administration of the People's Republic of China on 6 January 2012 and has been in force since 6 April 2012.

It is one of 44 parts of the NB/T 20008 series.

The NB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

NB/T 20008.4-2012 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 4,537 other NB/T standards.

Of the 1,959 NB/T standards that do carry an ICS number, 1,265 (65%) fall under ICS 27, in the field of energy and heat transfer engineering.

3 About this standard

Issued by: National Energy Administration of the People's Republic of China

English translation: about 15 pages

4 Related standards

Other parts of this standard:

NB/T 20008.1-2012 — Part 1: Alloy Steel Forgings for Use in Reactor Coolant System Supports

NB/T 20008.2-2010 — Part 2: Mn-mo-v Steel Castings for Use in the Fabrication of Steam Generator and Reactor Coolant Pump Supports, Main Steam Line Supports

NB/T 20008.3-2012 — Part 3: Class 3 Copper-aluminium Alloy Castings for Auxiliary System Pumps and Valves

NB/T 20008.5-2012 — Part 5: Class 1 and 2 Hot Rolled Nickel-Chromium-Iron Alloy Plates

NB/T 20008.6-2012 — Part 6: Hot Rolled Nickel-Chromium-Iron Alloy Plates

NB/T 20008.6-2024 — Other materials for pressurized water reactor nuclear power plants - Part 6: Nickel-based corrosion resistant alloy plates

NB/T 20008.7-2013 — Other Materials for Pressurized Water Reactor Nuclear Power Plants - Part 7: Seamless Nickel-chromium-iron Alloy for Steam Generator Tubes Bundles

NB/T 20008.7-2021 — Other materials for pressurized water reactor nuclear power plants - Part 7: Seamless nickel-chromium-iron alloy tubes for steam generator tube bundles

NB/T 20008.8-2012 — Other Materials for Pressurized Water Reactor Nuclear Power Plants - Part 8: Hot Extruded Nickel-chromium-iron Alloy Pipes

NB/T 20008.8-2021 — Other materials for pressurized water reactor nuclear power plants - Part 8: Hot extruded nickel-chromium-iron alloy pipes

NB/T 20008.8-2024 — Other materials for pressurized water reactor nuclear power plants - Part 8: Nickel-based corrosion-resistant alloy pipe

NB/T 20008.9-2012 — Part 9: Hot Rolled or Hot Extruded Nickel-Chromium-Iron Alloy Bars

NB/T 20008.9-2024 — Other materials for pressurized water reactor nuclear power plants - Part 9: Nickel-based corrosion resistant alloy rods

NB/T 20008.10-2012 — Part 10: Ni-Cr-Fe Alloy Rolled Bars Used for Internal Support Pins and Bolting

NB/T 20008.10-2024 — Other materials for pressurized water reactor nuclear power plants - Part 10: Nickel-based alloy rods for reactor internals and control rod drive mechanisms

NB/T 20008.11-2013 — Other Materials for Pressurized Water Reactor Nuclear Power Plants - Part 11: Rolled or Forged Bars for the Manufacture of Classes S1 and S2 Shafts, Tie-rods and Support Bolts

NB/T 20008.11-2024 — Other materials for pressurized water reactor nuclear power plants - Part 11: Forged bars for supports and connections

NB/T 20008.12-2010 — Part 12: Forged or Rolled Bars for Classes 1, 2, 3 Bolts and Nuts

NB/T 20008.12-2019 — Other materials for pressurized water reactor nuclear power plants Part 12: Forging and rolling rods for bolts and nuts of Class 1, 2, and 3

NB/T 20008.13-2013 — Other Materials for Pressurized Water Reactor Nuclear Power Plants - Part 13: Classes 1, 2, 3 Studs, Bolts, Screws, Threaded Rods and Nuts

NB/T 20008.13-2019 — Other materials for pressurized water reactor nuclear power plants Part 13: Class 1, 2, 3 studs, bolts, screws, screws and nuts

NB/T 20008.14-2013 — Other Materials for Pressurized Water Reactor Nuclear Power Plants - Part 14: Nickel-chromium-iron Alloy Wires of Springs

NB/T 20008.15-2012 — Part 15: Titanium Plate for Use in the Fabrication of Class 3 Heat Exchanger Plates

NB/T 20008.16-2012 — Other material for pressurized water reactor nuclear power plants - Part 16: Cobalt-base alloy for control rod drive mechanism

NB/T 20008.17-2012 — Part 17: Classes 2 and 3 Unalloyed and Alloy Ductile Iron Castings

NB/T 20008.21-2015 — Other material for pressurized water reactor nuclear power plants - Part 21: GH4169 alloy bars used for CRDM

NB/T 20008.22-2015 — Other material for pressurized water reactor nuclear power plants - Part 22: GH4145 alloy bars used for CRDM

NB/T 20008.23-2015 — Other Material for pressurized water reactor nuclear power plants - Part 23: Ni-base-alloy Wires used for CRDM

NB/T 20008.24-2015 — Other material for pressurized water reactor nuclear power plants - Part 24: GH4145 alloy bars for reactor vessel internals

NB/T 20008.25-2015 — Other material for pressurized water reactor nuclear power plants - Part 25: GH4169 alloy wires for reactor vessel internals

NB/T 20008.26-2017 — Other material for pressurized water reactor nuclear power plants - Part 26: spheroidal graphite cast iron used for control rod drive mechanism

NB/T 20008.27-2017 — Other materials for pressurized water reactor nuclear power plants - Part 27: ZCoCr29W4.5 castings used for CRDM

NB/T 20008.28-2017 — Other material for pressurized water reactor nuclear power plants - Part 28: NS3105 alloy forgings for nuclear safety related equipment

NB/T 20008.29-2017 — Other material for pressurized water reactor nuclear power plants - Part 29: NS3105 alloy plates and strips for nuclear safety related equipment

NB/T 20008.30-2017 — Other material for pressurized water reactor nuclear power plants - Part 30: NS3105 alloy pipes for nuclear safety related equipment

NB/T 20008.31-2017 — Other material for pressurized water reactor nuclear power plants - Part 31: NS3105 alloy bars for nuclear safety related equipment

NB/T 20008.32-2017 — Other material for pressurized water reactor nuclear power plants - Part 32: NS3306 alloy sheet and strip for CRDM

NB/T 20008.33-2017 — Other material for pressurized water reactor nuclear power plants - Part 33: GH5605 alloy bars for CRDM

NB/T 20008.34-2018 — Other material for pressurized water reactor nuclear power plants - Part 34: Alloy NS3105 U-bending tube used for steam generator

NB/T 20008.35-2018 — Other material for pressurized water reactor nuclear power plants - Part 35: Alloy NS3105 C-bending tube used for passive residual heat removal heat exchanger

NB/T 20008.36-2019 — Other materials for pressurized water reactor nuclear power plants Part 36: Nickel-based alloy wire for safety equipment

NB/T 20008.37-2019 — Other materials for pressurized water reactor nuclear power plants Part 37: Stainless steel clad steel plate for safety injection box

NB/T 20008.38-2019 — Other materials for pressurized water reactor nuclear power plants Part 38: Nickel-based corrosion-resistant alloy forgings for blast valve shear covers

Other editions:

NB/T 20008.4-2024 (later edition)

Standards on related subjects:

GB/T 18248-2021 — Seamless steel tubes for gas cylinder

GB/T 21832.1-2018 — Welded austenitic-ferritic duplex stainless steel tubes and pipes - Part 1: Tubes for heat exchangers

GB/T 18984-2016 — Seamless steel tubes for low-temperature service piping

5 Classification and status

Chinese Standard Classification (CCS): H 62

Prefix NB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Similar standards

Editions of NB/T 20008.4

EditionTitleRevisionStatus
NB/T 20008.4-2012Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 4: Forged or Rolled Classes 1, 2 and 3 Nickel-Chromium-Iron Alloy Partscurrent editionCurrent
EJ/T 463-1999Other Material for Pressurized Water Reactor Nuclear Power Plants - Part 4: Forged or Rolled Classes 1, 2 and 3 Nickel-Chromium-Iron Alloy Partsprevious editionSuperseded

This page sells the current edition, NB/T 20008.4-2012. Earlier editions are listed for reference only.

How to Download NB/T 20008.4-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

NB/T 20008.4-2012

$165.00