NB/T 20007.23-2013Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 23: Classes 1, 2 and 3 Pressure-retaining Austenitic-ferritic Stainless Steel Castings (English PDF)
压水堆核电厂用不锈钢 第23部分:1、2、3级奥氏体-铁素体不锈钢承压铸件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 20007.23-2013 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
June 8, 2013
Implementation date
October 1, 2013
Scope
NB/T 20007.23-2013 is the English-translated version of 压水堆核电厂用不锈钢 第23部分:1、2、3级奥氏体-铁素体不锈钢承压铸件.
NB/T 20007.23-2013 is the Chinese energy industry standard covering stainless Steel for Pressurized Water Reactor Nuclear Power Plants, Part 23: Classes 1, 2 and 3 Pressure-retaining Austenitic-ferritic Stainless Steel Castings.
It was issued on 8 June 2013 and has been in force since 1 October 2013, as a first edition. The document is under the responsibility of the National Energy Administration.
This page is published from the official record of the 2013 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — NB/T 20007.23-2013
National Standard of the People's Republic of China
Issued by: National Energy Administration of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 General requirements
- 4.1 Environmental conditions
- 4.2 Basic principles
- 4.3 Basic process
- 5 Technical Requirements
- 6 Test methods
- 7 Inspection Rules
- 8 Marking, packaging, transportation and storage
- 9 Evaluation indicators
1 Foreword
NB/T 20007.23-2013 was issued by National Energy Administration of the People's Republic of China on 8 June 2013 and has been in force since 1 October 2013.
It is one of 76 parts of the NB/T 20007 series.
The NB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
NB/T 20007.23-2013 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 4,537 other NB/T standards.
Of the 1,959 NB/T standards that do carry an ICS number, 1,265 (65%) fall under ICS 27, in the field of energy and heat transfer engineering.
3 About this standard
Issued by: National Energy Administration of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
NB/T 20007.1-2010 — Part 1: Classes 1, 2 and 3 Austenitic Stainless Steel Forgings
NB/T 20007.1-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 1: Class 1, 2 and 3 austenitic stainless steel forgings
NB/T 20007.1-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 1: Austenitic stainless steel forgings for level 1, 2, and 3 equipment
NB/T 20007.2-2012 — Part 2: Austenitic Stainless Steel Forgings for Classes 2 and 3 Tube Plates of Heat Exchanger
NB/T 20007.2-2021 — Stainless steel for pressurized water reactor of nuclear power plants - Part 2: Austenitic stainless steel forgings for class 2 and 3 tube plates of heat exchanger
NB/T 20007.3-2012 — Part 3: Controlled Nitrogen Content Austenitic Stainless Steel Forgings for Core Upports and Upper Support Plates
NB/T 20007.3-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 3: Controlled nitrogen content austenitic stainless steel forgings for core supports and upper support plates
NB/T 20007.4-2012 — Part 4: Niobium Stabilized Austenitic Stainless Steel Forgings for the Shafts of Reactor Coolant Pumps
NB/T 20007.5-2010 — Part 5: Classes 1, 2, 3 Austenitic Stainless Steel Plates
NB/T 20007.5-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 5: Class 1, 2, 3 austenitic stainless steel plates
NB/T 20007.5-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 5: Austenitic stainless steel plates for level 1, 2 and 3 equipment
NB/T 20007.6-2012 — Part 6: Controlled Nitrogen Content Austenitic Stainless Steel Plate for Reactor Internal
NB/T 20007.6-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 6: Austenitic stainless steel plates for reactor internals
NB/T 20007.7-2012 — Part 7: Austenitic Stainless Steel Plate and Strip for Classes S1 and S2 Supports
NB/T 20007.8-2010 — Part 8: Class 1, 2, 3 Austenitic Stainless Steel Seamless Pipes
NB/T 20007.8-2017 — Stainless steel for pressurized water reactor nuclear power plants - Part 8: Class 1, 2 and 3 austenitic stainless steel seamless pipes
NB/T 20007.8-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 8: Austenitic stainless steel seamless pipes for level 1, 2 and 3 equipment
NB/T 20007.9-2011 — Stainless steel for pressurized water reactor nuclear power plants - Part 9: Classes 1, 2, 3 austenitic stainless steel seamless butt-welding fittings
NB/T 20007.9-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 9: Butt-welded seamless pipe fittings of grade 1, 2, and 3 austenitic stainless steel
NB/T 20007.10-2013 — Power Plants - Part 10: Cold Rolled or Cold Drawn Seamless Austenitic Stainless Steel Tubes for Classes 2 and 3 Heat Exchangers
NB/T 20007.10-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 10: Cold-rolled and cold-drawn austenitic stainless steel seamless steel tubes for heat transfer tubes of Class 2 and 3 heat exchangers
NB/T 20007.10-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 10: Austenitic stainless steel seamless tubes for 1st, 2nd and 3rd stage heat exchangers
NB/T 20007.11-2013 — Power Plants - Part 11: Classes 1, 2 and 3 Austenitic Stainless Steel Pipes Welded with the Addition of Filler Metal
NB/T 20007.11-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 11: Grade 1, 2, and 3 austenitic stainless steel pipes welded with filler metals
NB/T 20007.12-2013 — Power Plants - Part 12: Classes 1, 2 and 3 Austenitic Stainless Steel Fittings Welded with the Addition of Filler Metal
NB/T 20007.12-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 12: Butt-welded stainless steel pipe fittings of grade 1, 2, and 3 welded with filler metals
NB/T 20007.13-2012 — Part 13: Forged Tubes and Elbows Made from Controlled Nitrogen Austenitic Stainless Steel for Reactor Coolant Piping
NB/T 20007.14-2010 — Part 14: Classes 1, 2, 3 Austenitic Stainless Steel Forged or Rolled Bars
NB/T 20007.14-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 14: Class 1, 2, 3 austenitic stainless steel forged or rolled bars
NB/T 20007.14-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 14: Austenitic stainless steel bars and shapes for level 1, 2 and 3 equipment
NB/T 20007.15-2012 — Stainless steel for pressurized water reactor nuclear power plants - Part 15: Strain hardened hot worked rolled or forged austenitic stainless steel bars for bolting material of reactor internals
NB/T 20007.15-2024 — Stainless steel for pressurized water reactor nuclear power plants - Part 15: Cold work hardened austenitic stainless steel bars for fasteners of reactor internals and core measurement seal assemblies
NB/T 20007.16-2012 — Part 16: Classes 2 and 3 Martensitic Stainless Steel Forgings
NB/T 20007.16-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 16: Class 2 and 3 martensitic stainless steel forgings
NB/T 20007.17-2012 — Part 17: Martensitic Stainless Steel Forgings Used for Internal Hold Down Springs
NB/T 20007.17-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 17: Martensitic stainless steel forgings used for internal hold down springs
NB/T 20007.18-2012 — Part 18: Rolled or Forged Martensitic Stainless Steel Parts for Classes 2 and 3 Auxiliary Pump Drive Shafts
NB/T 20007.19-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 19: Classes 1, 2 and 3 pressure-retaining martensitic stainless steel castings
NB/T 20007.19-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 19: Class 1, 2 and 3 pressure-retaining martensitic stainless steel castings
NB/T 20007.20-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 20: Martensitic stainless steel for non-pressure-retaining internal category A, B and C parts of pumps
NB/T 20007.20-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 20: Martensitic stainless steel for pumps Class A, B, C non-pressure casting internals
NB/T 20007.21-2012 — Part 21: Martensitic Stainless Steel Plates for Use in Making Steam Generator Tube Support Plates
NB/T 20007.22-2012 — Part 22: Seamless Pipes Made from Martensitic Stainless Steel for Drive Rods of Reactor Control Rod Drive Mechanisms
NB/T 20007.24-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 24: Pressure-retaining austenitic-ferritic stainless steel castings for reactor coolant pump casings
NB/T 20007.25-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 25: Chromium-nickel austenitic-ferritic stainless steel containing no molybdenum for non-pressure-retaining cast internal pump parts of category A, B and C
NB/T 20007.25-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 25: Austenitic-ferritic stainless steel non-pressure-retaining cast internal parts of category A, B and C for pumps
NB/T 20007.26-2012 — Part 26: Austenitic-ferritic Stainless Steel Centrifugally Cast Pipes for Reactor Coolant Piping
NB/T 20007.27-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 27: Cast elbows and inclined nozzles made from austenitic-ferritic stainless steel for reactor coolant piping
NB/T 20007.28-2014 — Stainless steel for pressurized water reactor nuclear power plants - Part 28: Class 3 pressure-retaining austenitic-ferritic (duplex) stainless steel castings for seawater application
NB/T 20007.29-2014 — Stainless steel for pressurized water reactor nuclear power plants - Part 29: Non-pressure-retaining category A, B and C austenitic-ferritic duplex stainless steel castings for pumps
NB/T 20007.31-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 31: 022Cr19Ni10 stainless steel forgings used for containment vessel
NB/T 20007.32-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 32: 022Cr19Ni10 stainless steel seamless pipes for containment vessel
NB/T 20007.33-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 33: 015Cr17Ni12Mo2N stainless steel forged pipes for reactor coolant piping
NB/T 20007.34-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 34: 03Cr22Mn5Ni2MoCuN duplex stainless steel plates for modules
NB/T 20007.35-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 35: 06Cr18Ni11Ti stainless steel plates used for containment vessel mechanical penetrations
NB/T 20007.36-2015 — Stainless steel for pressurized water reactor nuclear power plant - Part 36: Austenitic stainless steel forged bars used for pressure-retaining components of CRDM
NB/T 20007.37-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 37: Austenitic stainless steel bars used for non-pressure-retaining components of CRDM
NB/T 20007.38-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 38: Austenitic stainless steel bars used for locking screw of CRDM
NB/T 20007.39-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 39: Martensitic stainless steel bars used for drive rod of CRDM
NB/T 20007.40-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 40: austenitic stainless steel forgings used for reactor vessel internals
NB/T 20007.41-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 41: austenitic stainless steel seamless pipes used for reactor vessel internals
NB/T 20007.42-2015 — Stainless steel for pressurized water reactor nuclear power plants - Part 42: precipitation-hardening stainless steel bars for reactor vessel internals
NB/T 20007.43-2016 — Stainless steel for pressurized water reactor nuclear power plants - Part 43: 022Cr17Ni12Mo2N austenitic stainless steel forgings used for nozzles for reactor coolant piping
NB/T 20007.44-2016 — Stainless steel for pressurized water reactor nuclear power plants - Part 44: 015Cr17Ni12Mo2N austenitic stainless steel pipes for surge line pipe spool pieces
NB/T 20007.45-2016 — Stainless steel for pressurized water reactor nuclear power plants - Part 45: 04Cr13Ni5Mo martensitic stainless steel forgings for hold-down springs
NB/T 20007.45-2017 — Stainless steel far pressurized water reactpr nuclear power plant. Part 45: 04Cr13Ni5Mo martensitic stainless steel for hold-down spring
NB/T 20007.46-2017 — Stainless steel for pressurized water reactor nuclear power plants - Part 46: 06Cr13Al stainless steel plates used for steam generator
NB/T 20007.47-2017 — Stainless steel for pressurized water reactor nuclear power plant - Part 47: 06Cr13Al stainless steel bars used for steam generator
NB/T 20007.48-2017 — Stainless steel for pressurized water reactor nuclear power plants - Part 48: Stainless steel bars for fasteners of nuclear safety related equipment
NB/T 20007.49-2018 — Stainless steel for pressurized water reactor nuclear power plants - Part 49: Strain-hardened stainless steel bars for safety class components
NB/T 20007.50-2018 — Stainless steel for pressurized water reactor nuclear power plants - Part 50: Austenitic stainless steel forgings for nuclear safety related components
NB/T 20007.51-2018 — Stainless steel for pressurized water reactor nuclear power plants - Part 51: Austenitic stainless steel plates for nuclear safety related components
NB/T 20007.52-2018 — Stainless steel for pressurized water reactor nuclear power plants - Part 52: Austenitic stainless steel bars and sections for safety related components
NB/T 20007.53-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 53: Austenitic stainless steel seamless steel tubes for safety grade equipment
NB/T 20007.54-2019 — Stainless steel for pressurized water reactor nuclear power plants Part 54: Austenitic stainless steel seamless heat exchange tubes for safety equipment
Other editions:
NB/T 20007.23-2021 (later edition)
Standards on related subjects:
GB/T 23301-2024 — Cast aluminium alloys for automobile wheels
GB/T 17445-2022 — Cast grinding balls
GB/T 16746-2018 — Zinc alloy castings
5 Classification and status
Prefix NB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download NB/T 20007.23-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
NB/T 20007.24-2013 — Stainless steel for pressurized water reactor nuclear power plants - Part 24: Pressure-retaining austenitic-ferritic stainless steel castings for reactor coolant pump casings
NB/T 20007.22-2012 — Stainless Steel for Pressurized Water Reactor Nuclear Power Plants - Part 22: Seamless Pipes Made from Martensitic Stainless Steel for Drive Rods of Reactor Control Rod Drive Mechanisms
NB/T 20007.25-2021 — Stainless steel for pressurized water reactor nuclear power plants - Part 25: Austenitic-ferritic stainless steel non-pressure-retaining cast internal parts of category A, B and C for pumps
NB/T 20007.23-2013
$389.00