LS/T 6134-2018Inspection of grain and oils. Determination of cadmium in cereals. Diluted acid extraction coupled with graphite furnace atomic absorption spectrophotometer (English PDF)
This is a limited preview
Buy now to download the full PDF (4 pages)
Need quotation for your management?
Get a formal quotation for LS/T 6134-2018 in 30 minutes.
Issued by
National Grain and Material Reserves Administration
Level / Type
National · Recommended
Issue date
April 9, 2018
Implementation date
July 1, 2018
Scope
LS/T 6134-2018 (Inspection of grain and oils. Determination of cadmium in cereals. Diluted acid extraction coupled with graphite furnace atomic absorption spectrophotometer) is available as an English-translated PDF.
LS/T 6134-2018 — This standard specifies the principle, reagents and solutions, instruments and equipment for the determination of cadmium in grains by dilute acid extraction-graphite furnace atomic absorption spectrometry.
Analyze steps, result calculations, and precision. This standard applies to the determination of cadmium in grain, grain and milled products such as wheat, corn and rice.
The detection limit of cadmium in this standard is 0.0006mg/kg, and the limit of quantification is 0.0021mg/kg.
Found what you need?
Document preview — LS/T 6134-2018
National Standard of the People's Republic of China
- ICS
- 67.060
- Classification
- X 11
Issued by: National Grain and Material Reserves Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Principle
- 4 Reagents and solutions
- 4.1 Reagents
- 4.2 Reagent preparation
- 4.3 Standards
- 4.4 Preparation of standard solution
Foreword
This standard was drafted in accordance with the rules given in GB/T 1.1-2009.
This standard was proposed by the National Grain and Material Reserve Bureau.
This standard is under the jurisdiction of the National Grain and Oil Standardization Technical Committee (SAC/TC270).
This standard was drafted. Scientific Research Institute of the State Grain Administration, Standard Quality Center of the State Grain Administration, and Grain Quality Supervision of the Ministry of Agriculture and Rural Affairs.
Testing Center, Hunan Grain and Oil Product Quality Monitoring Center, Tianjin National Grain Quality Monitoring Center, Hebei Grain and Oil Quality Testing Center, Ji Linshui Cereals and Oils Hygiene Inspection and Monitoring Station, Shanghai National Grain Quality Monitoring Center, Xiamen Grain and Oil Quality Supervision Station, Wuhan Cereals, Oils and Foodstuffs Center Inspection station, Harbin sub-station of Heilongjiang Provincial Cereals and Oils Hygiene Inspection and Monitoring Station, Changchun Grain and Oil Hygiene Inspection and Monitoring Station, and quality of grain and oil products in Zhejiang Province Inspection Center, Chongqing National Grain Quality Monitoring Center, Daqing Grain Quality Inspection and Monitoring Station, Xi'an Grain and Oil Quality Inspection Center, Suzhou City Grain and Oil Quality Monitoring Institute, Lianyungang Grain and Oil Quality Monitoring Institute, Beijing Agricultural Product Quality Testing and Farmland Environmental Monitoring Technology Research Center.
1 Scope
This standard specifies the principle, reagents and solutions, instruments and equipment for the determination of cadmium in grains by dilute acid extraction-graphite furnace atomic absorption spectrometry.
Analyze steps, result calculations, and precision.
This standard applies to the determination of cadmium in grain, grain and milled products such as wheat, corn and rice.
The detection limit of cadmium in this standard is 0.0006mg/kg, and the limit of quantification is 0.0021mg/kg.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Preparation of standard solution for GB/T 602 chemical reagent impurity determination GB/T 5491 Inspection of food and oil materials, sample method GB/T 6682 Analytical laboratory water specifications and test methods
3 Principle
After the sample is pulverized, the cadmium is extracted by shaking with dilute nitric acid, and determined by graphite furnace atomic absorption spectrometry. The standard curve method is used to calculate the cadmium in the sample.
content.
4 Reagents and solutions
Note. Unless otherwise stated, all reagents are of analytical grade and water should meet the requirements of Class I water in GB/T 6682.
4.1 Reagents
4.1.1 Nitric acid (HNO3). excellent grade pure.
4.1.2 Palladium nitrate [Pd(NO3)2] hydrate. purity is 99.9%.
4.2 Reagent preparation
4.2.1 Nitric acid solution (0.5%, volume fraction). Take 0.5 mL of nitric acid (4.1.1) to a volume of 100 mL.
4.2.2 100 mg/L palladium nitrate. 0.1 g of palladium nitrate (4.1.2) was dissolved in 0.5% nitric acid (4.2.1) and made up to 1000 mL.
4.3 Standards
The standard solution of cadmium is 1000mg/L (or 500mg/L), and can also be prepared according to GB/T 602 method.
4.4 Preparation of standard solution
4.4.1 Standard stock solution. Dilute the cadmium standard solution (4.3) to 100 µg/L with a nitric acid solution (4.2.1).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 4 pages — is available in the English PDF.
Referenced standards
How to Download LS/T 6134-2018
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 5491-2025 — Inspection of grain and oil seeds - Sampling and dividing
GB/T 602-2026 — Chemical reagent - Preparation of standard solutions for impurity determination
GB/T 6020-2008 — Butadiene for industrial use -- Determination of tert-butyl-catechol (TBC)
Secure payment via Stripe
Payments accepted
LS/T 6134-2018
$85.00