Valid

JTS 252-2015Construction Environmental Supervision Code for Port and Waterway Engineering (English PDF)

水运工程施工监理规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (30 pages)

Need quotation for your management?

Get a formal quotation for JTS 252-2015 in 30 minutes.

Issued by

Ministry of Transport

Level / Type

National · Mandatory

Issue date

January 29, 2018

Implementation date

April 1, 2018

Scope

JTS 252-2015 is the English-translated version of 水运工程施工监理规范.

JTS 252-2015 is the Chinese standard "Construction Environmental Supervision Code for Port and Waterway Engineering". This standard applies to the supervision of the environmental impact of construction activities of water transport projects.

It was issued by Ministry of Transport. Issued on 2018-01-29, in force from 2018-04-01. It cites 1 other standard.

Found what you need?

Document preview — JTS 252-2015

National Standard of the People's Republic of China

Classification
P67

Issued by: Ministry of Transport

Contents

  • [Preview only]
  • 1 General Provisions
  • 2 Terms
  • 3 Basic Requirements
  • 3.1 General Requirements
  • 3.2 Seismic Precaution Classification and Precautionary Criterion
  • 3.3 Actions and Action Effect Combination
  • 3.4 Durability Requirements
  • 4 Materials
  • 4.2 Liquefiable Soil Foundation
  • 4.3 Hydrology and Silt
  • 4.4 Weather
  • 4.5 Other Influencing Factors
  • 4.6 Mixing Water
  • 4.7 Admixtures
  • 5 Storage Load and Crowd Load
  • 5.2 Crowd Load
  • 5.3 Seismic Earth Pressure
  • 5.4 Earthquake Hydrodynamic Pressure
  • 5.5 Foundation Bearing Capacity and Bank Stability
  • 5.6 Structure Check
  • 5.7 Calculation of Punching Shear Bearing Capacity
  • 5.8 Calculation of Partial Bearing Capacity
  • 6 Hoisting Machinery Load
  • 6.2 Characteristic Value of Load
  • 6.3 High-piled Dolphin Wharf
  • 6.4 Sheet Pile Wharf
  • 6.5 Sloping Wharf and Floating Wharf
  • 6.6 Breakwater
  • 6.7 Navigation Lock
  • 6.8 Wharf Equipment and Auxiliary Facilities
  • 7 Train Load
  • 7.2 Concrete Cover
  • 7.3 Steel Bar Anchoring
  • 7.4 Steel Bar Connection
  • 7.5 Minimum Ratio of Reinforcement of Longitudinal Stressed Steel Bar
  • 7.6 Structure of Prestressed Concrete Member
  • 7.7 Dredging of Polluted Soil
  • 7.8 Rock Dredging
  • 7.9 Trial Dredging
  • 8 Vehicle Load
  • 8.1 Slabs
  • 8.2 Beams
  • 8.3 Columns
  • 8.4 Superposed Flexural Members
  • 8.5 Deep Flexural Member
  • 8.6 Truss
  • 8.7 Caisson
  • 8.8 Buttress
  • 8.9 Underground Diaphragm Wall
  • 9 Cargo Cable Load
  • 9.2 Dredged Material Assessment
  • 9.3 Dredged Material Utilization
  • 9.4 Dredged Material Disposal
  • 9.5 Dredged Material Treatment
  • 9.6 Unbounded Prestressing

1 Foreword

JTS 252-2015 was issued by Ministry of Transport on 29 January 2018 and has been in force since 1 April 2018.

The JTS prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.

The document runs to 30 pages in English translation.

2 Scope Preview

This standard applies to the supervision of the environmental impact of construction activities of water transport projects.

JTS 252-2015 is filed under Chinese Standard Classification P67, in the field of engineering construction.

This catalogue holds 48 other JTS standards without an ICS number.

In this catalogue, JTS standards carry edition years from 2007 to 2024.

3 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document.

JTS 252

4 About this standard

Issued by: Ministry of Transport

English translation: about 30 pages (approximate)

5 Related standards

Standards on related subjects:

JT/T 496-2004 — High-density polyethylene silicon duct for highway communication conduit

JT/T 1510-2024 — Safety management code for construction of underwater concealed works in water transport projects

JT/T 1509-2024 — General safety technical regulations for water transport engineering operations

6 Classification and status

Chinese Standard Classification (CCS): P 67

Prefix JTS: mandatory standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 30 pages — is available in the English PDF.

Referenced standards

How to Download JTS 252-2015

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
30 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JTS 252-2015

$1,070.00