JJF 1954-2021Calibration Specification for Volume Sound Sources (English PDF)
体积声源校准规范
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for JJF 1954-2021 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
December 28, 2021
Implementation date
June 28, 2022
Scope
JJF 1954-2021 is the English-translated version of 体积声源校准规范.
JJF 1954-2021 is the Chinese standard "Calibration Specification for Volume Sound Sources". Issued on 2021-12-28, in force from 2022-06-28.
Found what you need?
Document preview — JJF 1954-2021
Contents
- Introduction (II)
- 1 Scope(1)
- 2 References (1)
- 3 Terms and units of measurement(1)
- 4 Overview(2)
- 5 Metrology Characteristics(2)
- 5.1 Sound power level(2)
- 5.2 Volume acceleration sensitivity(2)
- 6 Calibration Conditions(2)
- 6.1 Environmental conditions (2)
- 6.2 Measurement standards and other equipment(2)
- 7 Calibration items and calibration methods (3)
- 7.1 Calibration items(3)
- 7.2 Calibration method(3)
- 8 Expression of calibration results (5)
- 8.1 Calibration data processing(5)
- 8.2 Measurement uncertainty of calibration results(5)
- 8.3 Calibration certificate(5)
- 9 Recalibration interval(5)
- Appendix A Internal Page Format of Calibration Certificate(6)
- Appendix B Microphone Location Diagram (8)
- Appendix C Measurement Uncertainty Evaluation Example(9)
1 Scope(1)
2 References (1)
3 Terms and units of measurement(1)
4 Overview(2)
5 Metrology Characteristics(2)
5.1 Sound power level(2)
5.2 Volume acceleration sensitivity(2)
6 Calibration Conditions(2)
6.1 Environmental conditions (2)
6.2 Measurement standards and other equipment(2)
7 Calibration items and calibration methods (3)
7.1 Calibration items(3)
7.2 Calibration method(3)
8 Expression of calibration results (5)
8.1 Calibration data processing(5)
8.2 Measurement uncertainty of calibration results(5)
8.3 Calibration certificate(5)
9 Recalibration interval(5)
Appendix A Internal Page Format of Calibration Certificate(6)
Appendix B Microphone Location Diagram (8)
Appendix C Measurement Uncertainty Evaluation Example(9)
Introduction
This specification is compiled according to the rules given in JJF 1071-2010 "Rules for Compilation of National Metrology Calibration Specifications".
This specification gives the measurement of sound power level according to JJF 1059.1-2012 "Measurement Uncertainty Evaluation and Representation"
Example of the evaluation of uncertainty.
This specification is published for the first time.
Volume Sound Source Calibration Specification
1 Scope
This specification applies to the calibration of the acoustic performance of volume sound sources.
2 Reference documents this specification references the following documents.
JJG175 Working Standard Microphone (Electrostatic Exciter Method) JJG176 Acoustic Calibrator JJG277 standard sound source JJG449 Octave and Fractional Octave Filters JJF 1001 General Metrology Terms and Definitions JJF 1034 Acoustic Metrology Terms and Definitions JJF 1288 Calibration Specification for Multi-Channel Acoustic Analyzers GB/T 3102.7 Acoustic Quantities and Units GB/T 3785.1 Electroacoustic Sound Level Meter Part 1: Specification for dated references, only the dated version applies to this specification; for undated references the latest version (including all amendments) applies to this specification.
3 Terminology and units of measurement this specification adopts the quantities and units specified in GB/T 3102.7.
Terms and definitions defined in JJF 1001, JJF 1034 and JJG277 and the following apply to this specification.
volume acceleration Qac the particle normal acceleration of the sound source sound hole is multiplied by the area of the sound hole.
Note. The unit is cubic meters per second squared (m3/s2).
Sva
The output voltage value of the volume sound source under the unit volume acceleration.
1 The voltage value is given by the voltage measured by the built-in sensor of the volume sound source. The internal sensor of the volume sound source may be a microphone, or Possibly an accelerometer.
2 The unit is volts squared per cubic meter [V/(m3/s2)].
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
How to Download JJF 1954-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1954-2021
$270.00