JJF 1929-2021Calibration Specification for Rotating Disc Electrode Atomic Emission Spectrometers (English PDF)
旋转圆盘电极发射光谱仪 校准规范
This is a limited preview
Buy now to download the full PDF (14 pages)
Need quotation for your management?
Get a formal quotation for JJF 1929-2021 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
October 18, 2021
Implementation date
April 18, 2022
Scope
JJF 1929-2021 is the English-translated version of 旋转圆盘电极发射光谱仪 校准规范.
JJF 1929-2021 is the Chinese standard "Calibration Specification for Rotating Disc Electrode Atomic Emission Spectrometers". Issued on 2021-10-18, in force from 2022-04-18.
Found what you need?
Document preview — JJF 1929-2021
Contents
- 1 Scope(1)
- 2 References (1)
- 3 Terms (1)
- 3.1 Graphite disk electrode(1)
- 3.2 Graphite rod electrode(1)
- 3.3 Analyzing the gap(1)
- 3.4 Optical tracing(1)
- 4 Overview(1)
- 5 Metrology Characteristics(2)
- 6 Calibration Conditions(2)
- 6.1 Environmental conditions (2)
- 6.2 Measurement standards and other equipment(2)
- 7 Calibration items and calibration methods (2)
- 7.1 Preparation before calibration(2)
- 7.2 Indication error(2)
- 7.3 Repeatability(3)
- 7.4 Stability(3)
- 7.5 Detection limit(3)
- 8 Expression of calibration results (4)
- 9 Recalibration interval(4)
- Introduction
1 Scope(1)
2 References (1)
3 Terms (1)
3.1 Graphite disk electrode(1)
3.2 Graphite rod electrode(1)
3.3 Analyzing the gap(1)
3.4 Optical tracing(1)
4 Overview(1)
5 Metrology Characteristics(2)
6 Calibration Conditions(2)
6.1 Environmental conditions (2)
6.2 Measurement standards and other equipment(2)
7 Calibration items and calibration methods (2)
7.1 Preparation before calibration(2)
7.2 Indication error(2)
7.3 Repeatability(3)
7.4 Stability(3)
7.5 Detection limit(3)
8 Expression of calibration results (4)
9 Recalibration interval(4)
Appendix A Calibration Raw Record Format(5)
Appendix B Calibration Certificate Inner Page Format (8)
Appendix C Gravimetric Dilution of Certified Reference Materials and Example of Uncertainty Evaluation (9)
Appendix D Example of Uncertainty Evaluation of Indication Error Calibration Results (13)
Introduction
This specification is based on JJF 1001-2011 "General Metrology Terms and Definitions", JJF 1059.1-2012 "Measuring Determination Evaluation and Representation", JJF 1071-2010 "Rules for Compilation of National Metrology Calibration Specifications".
In the preparation process, reference was made to NB/SH/T 0865-2013 "Wear Metals and Contaminant Elements in Lubricating Oils in Service" Rotating disk electrode atomic emission spectrometry for element determination", ASTMD6595-2017 "In-use lubricating oil or hydraulic oil Determination of Medium Wear Metals and Contaminant Elements by Rotating Disk Electrode Atomic Emission Spectrometry (StandardTest ASTMD6728-2016 "Determination of Contaminant Element Content in Gas Turbine and Diesel Engine Fuel Rotating Disk Electrode the technical indicators, detection methods, etc.
This specification is published for the first time.
Specification for Calibration of Rotating Disk Electrode Emission Spectrometers
1 Scope
This specification applies to the calibration of rotating disk electrode emission spectrometers using a graphite electrode discharge to excite the sample.
2 Reference documents this specification references the following documents.
NB/SH/T 0865-2013 Determination of Rotating Disk Electrodes for Wear Metals and Contaminant Elements in Lubricating Oils Atomic Emission Spectroscopy for dated references, only the dated version applies to this specification; for undated references the latest version (including all amendments) applies to this specification.
3 Terminology
Terms and definitions defined in NB/SH/T 0865-2013 and the following apply to this specification.
Use a soft carbon material to be processed into the shape of a disk as the counter electrode of the arc/spark spectrometer.
in oil analysis.
3.2 Graphite rod electrode Use a soft carbon material machined into the shape of a rod as the counter electrode of an arc/spark spectrometer for Oil analysis.
3.3 Analysis gap the gap between the graphite disk electrode and the graphite rod electrode after being installed on the corresponding fixture of the rotating disk electrode emission spectrometer.
3.4 Optical tracing profiling Set the actual position of the entrance slit to obtain the best test intensity.
4 Overview
The rotating disk electrode emission spectrometer (hereinafter referred to as the spectrometer) is to bring the sample to the stone through the rotation of the graphite disk electrode.
The analysis gap between the ink disk electrode and the graphite rod electrode is used to excite the sample by the high-voltage arc generated between the two electrodes.
The atom or ion of the element enters the excited state from the ground state, and the characteristic emitted when the atom or ion returns from the excited state to the ground state is detected.
It is an emission spectrometer that realizes the qualitative and quantitative analysis of each element in the sample. It is mainly used for the determination of various types of oils Wear metal and contaminant element content in the product.
The instrument is mainly composed of sampling unit, excitation unit, dispersion unit, detection unit, signal processing unit, display unit its structure is shown in Figure 1.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.
How to Download JJF 1929-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1929-2021
$330.00