JJF 1922-2021Calibration Specification for GNSS Signal Record &Playback Instruments (English PDF)
GNSS导航信号采集回放仪 校准规范
This is a limited preview
Buy now to download the full PDF (23 pages)
Need quotation for your management?
Get a formal quotation for JJF 1922-2021 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
October 18, 2021
Implementation date
April 18, 2022
Scope
JJF 1922-2021 is the English-translated version of GNSS导航信号采集回放仪 校准规范.
JJF 1922-2021 is the Chinese standard "Calibration Specification for GNSS Signal Record &Playback Instruments". Issued on 2021-10-18, in force from 2022-04-18.
Found what you need?
Document preview — JJF 1922-2021
Contents
- 1 Scope(1)
- 2 References (1)
- 3 Terms and Definitions (1)
- 4 Overview(1)
- 5 Metrology Characteristics(2)
- 6 Calibration Conditions(2)
- 6.1 Environmental conditions (2)
- 6.2 Measurement standards and other equipment(3)
- 7 Calibration items and calibration methods (4)
- 7.1 Calibration items(4)
- 7.2 Calibration method(4)
- 8 Expression of calibration results (8)
- 9 Recalibration interval(9)
- Introduction
1 Scope(1)
2 References (1)
3 Terms and Definitions (1)
4 Overview(1)
5 Metrology Characteristics(2)
6 Calibration Conditions(2)
6.1 Environmental conditions (2)
6.2 Measurement standards and other equipment(3)
7 Calibration items and calibration methods (4)
7.1 Calibration items(4)
7.2 Calibration method(4)
7.2.1 Appearance and function inspection (4)
7.2.1.1 Visual inspection (4)
7.2.1.2 Functional check (4)
7.2.2 Acquisition signal input power range(5)
7.2.3 3dB acquisition bandwidth(5)
7.2.4 In-band spurs(6)
7.2.5 Playback signal frequency(6)
7.2.6 Playback signal power level(7)
7.2.7 Playback signal phase noise(7)
7.2.8 Internal crystal frequency(7)
7.2.9 Carrier-to-Noise Ratio Consistency(7)
7.2.10 Positioning Consistency(8)
8 Expression of calibration results (8)
9 Recalibration interval(9)
Appendix A Calibration Raw Record Format(10)
Appendix B Calibration Certificate Inside Page Format (13)
Appendix C Example of Uncertainty Assessment of Calibration Results (16)
Introduction
JJF 1071-2010 "Rules for Compilation of National Metrology Calibration Specifications", JJF 1001 "General Metrology Terms and Definitions", JJF 1059.1-2012 "Assessment and Representation of Measurement Uncertainty" together constitute the basis for the preparation of this specification Series Specifications.
This specification is published for the first time.
Calibration specification for GNSS navigation signal acquisition and playback instrument
1 Scope
This specification applies to the acquisition and playback of GPS, BDS, GLONASS and Galileo satellite navigation signals Calibration of GNSS navigation signal acquisition and playback instrument (hereinafter referred to as acquisition and playback instrument).
2 Reference documents this specification references the following documents.
GB/T 19391 Global Positioning System (GPS) Terms and Definitions for dated references, only the dated version applies to this specification; for undated references the latest version (including all amendments) applies to this specification.
3 Terms and Definitions the carrier-to-noise ratio calculated by the navigation receiver receiving the navigation simulator signal is the same as the same navigation receiver receiving the acquisition and playback.
The difference between the carrier-to-noise ratios of the navigation signals in a scene.
The navigation receiver receives the positioning deviation calculated by the navigation simulator signal, and receives the acquisition and playback with the same navigation receiver.
The difference between the positioning deviations calculated by the navigation signals in the same scene.
The positioning accuracy calculated by the navigation receiver receiving the navigation simulator signal is the same as that obtained by the same navigation receiver.
The difference between the positioning accuracy calculated by the navigation signal in the same scene.
The navigation receiver receives the navigation simulator signal and receives the acquisition and playback instrument to play back the satellite navigation signal of the same scene.
The consistency of the carrier-to-noise ratios of the last two solutions is represented by the playback carrier-to-noise ratio deviation.
The navigation receiver receives the signal of the navigation simulator and receives the acquisition and playback instrument to play back the satellite navigation signal of the same scene.
The consistency of the positioning deviation and positioning accuracy of the two solutions before and after is determined by the playback positioning deviation and playback positioning accuracy.
Deviation representation.
4 Overview
The acquisition and playback instrument can collect satellite navigation signals in the real environment, and store and return the collected signals.
It is mainly used for the test of GNSS navigation terminal. Its principle block diagram is shown in Figure 1, which is mainly composed of filter amplification, down-conversion Frequency, analog-to-digital conversion, central processing unit, storage unit, digital-to-analog conversion, up-conversion, filter attenuation and other units.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.
How to Download JJF 1922-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1922-2021
$455.00