JJF 1921-2021Calibration Specification for GNSS Vehicle Travelling Data Recorders (English PDF)
GNSS行驶记录仪校准规范
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JJF 1921-2021 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
October 18, 2021
Implementation date
April 18, 2022
Scope
JJF 1921-2021 is the English-translated version of GNSS行驶记录仪校准规范.
JJF 1921-2021 is the Chinese standard "Calibration Specification for GNSS Vehicle Travelling Data Recorders". Issued on 2021-10-18, in force from 2022-04-18.
Found what you need?
Document preview — JJF 1921-2021
Contents
- 1 Scope(1)
- 2 References (1)
- 3 Terms (1)
- 3.1 Positioning deviation (1)
- 3.2 Speed deviation (1)
- 4 Overview(1)
- 5 Metrology Characteristics(2)
- 5.1 Positioning deviation (2)
- 5.2 Speed deviation (2)
- 5.3 Mileage record error(2)
- 5.4 Time recording error(2)
- 5.5 Sensitivity(2)
- 6 Calibration Conditions(2)
- 6.1 Environmental conditions (2)
- 6.2 Main calibration equipment(2)
- 7 Calibration items and calibration methods (3)
- 7.1 Calibration items(3)
- 7.2 Calibration method(3)
- 8 Expression of calibration results (6)
- 9 Recalibration interval(7)
- Introduction
1 Scope(1)
2 References (1)
3 Terms (1)
3.1 Positioning deviation (1)
3.2 Speed deviation (1)
4 Overview(1)
5 Metrology Characteristics(2)
5.1 Positioning deviation (2)
5.2 Speed deviation (2)
5.3 Mileage record error(2)
5.4 Time recording error(2)
5.5 Sensitivity(2)
6 Calibration Conditions(2)
6.1 Environmental conditions (2)
6.2 Main calibration equipment(2)
7 Calibration items and calibration methods (3)
7.1 Calibration items(3)
7.2 Calibration method(3)
8 Expression of calibration results (6)
9 Recalibration interval(7)
Appendix A Calibration Raw Record Reference Format(8)
Appendix B Calibration Certificate Inner Page Format (10)
Appendix C Example of Uncertainty Evaluation of Calibration Results of Main Items (12)
Appendix D Standard Scenario Description (18)
Introduction
JJF 1071-2010 "Rules for the Compilation of National Metrology Calibration Standards", JJF 1001 "General Metrology Terms and Definitions" JJF 1059.1-2012 "Assessment and Representation of Measurement Uncertainty" together constitute the basis for the preparation of this specification Series Specifications.
This specification is published for the first time.
GNSS tachograph calibration specification
1 Scope
This specification applies to the calibration of vehicle tachographs for road transport vehicles using satellite navigation operating mode.
2 Reference documents this specification references the following documents.
JJF 1001-2011 "General Metrology Terms and Definitions" JJF 1180-2007 "Terms and Definitions of Time and Frequency Measurement" JJF 1403-2013 "Global Navigation Satellite System (GNSS) Receiver (Time Measurement Type)" GB/T 19056-2012 "Car Driving Recorder" for dated references, only the dated version applies to this specification; for undated references the latest version (including all amendments) applies to this specification.
3 Terminology
3.1 Positioning bias positionbias the deviation of the position value recorded by the car tachograph from the standard position value.
3.2 Velocitybias
The deviation of the speed value measured by the tachograph from the standard speed value.
4 Overview
The tachograph is the information on the vehicle position, driving speed, mileage, time and other status information about the driving of the vehicle.
It is a digital electronic recording device that records and stores information and realizes data output through data communication. driving recorder Mainly composed of microprocessor, data memory, display, data communication interface, display, micro printer, internal time it consists of clock, data input device, vehicle speed sensor (satellite navigation and positioning module), etc. (see Figure 1).
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
How to Download JJF 1921-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1921-2021
$330.00