JJF 1915-2021Inclinometer calibration specification (English PDF)
倾角仪校准规范
This is a limited preview
Buy now to download the full PDF (11 pages)
Need quotation for your management?
Get a formal quotation for JJF 1915-2021 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
July 28, 2021
Implementation date
January 28, 2022
Scope
JJF 1915-2021 is the English-translated version of 倾角仪校准规范.
JJF 1915-2021 is the Chinese standard "Inclinometer calibration specification". Issued on 2021-07-28, in force from 2022-01-28.
Found what you need?
Document preview — JJF 1915-2021
Contents
- 1 Scope(1)
- 2 Overview(1)
- 3 Metrology Characteristics(2)
- 3.3 Zero value error(2)
- 3.4 Zero-value error consistency (2)
- 3.5 Indication error(2)
- 4 Calibration Conditions(2)
- 4.1 Environmental conditions (2)
- 4.2 Standards and other equipment for calibration (2)
- 5 Calibration items and calibration methods (3)
- 5.3 Zero value error(4)
- 5.4 Zero-value error consistency(4)
- 5.5 Indication error(4)
- 5.6 Repeatability of the displayed value of the electronic digital inclinometer (4)
- 6 Calibration results (5)
- 7 Recalibration interval(5)
- Introduction
1 Scope(1)
2 Overview(1)
3 Metrology Characteristics(2)
3.1 The parallelism between the working faces of the electronic digital display inclinometer with multiple working faces (2)
3.2 The verticality between the working faces of the electronic digital display inclinometer with multiple working faces (2)
3.3 Zero value error(2)
3.4 Zero-value error consistency (2)
3.5 Indication error(2)
3.6 The repeatability of the displayed value of the electronic digital inclinometer (2)
4 Calibration Conditions(2)
4.1 Environmental conditions (2)
4.2 Standards and other equipment for calibration (2)
5 Calibration items and calibration methods (3)
5.1 The parallelism between the working faces of the electronic digital display inclinometer with multiple working faces (3)
5.2 The verticality between the working faces of the electronic digital display inclinometer with multiple working faces (3)
5.3 Zero value error(4)
5.4 Zero-value error consistency(4)
5.5 Indication error(4)
5.6 Repeatability of the displayed value of the electronic digital inclinometer (4)
6 Calibration results (5)
7 Recalibration interval(5)
Appendix A Special Fixtures(6)
Appendix B Indication Error Measurement Result Uncertainty Evaluation Example(7)
Introduction
JJF 1071-2010 "Rules for the Compilation of National Metrology Calibration Standards", JJF 1001 "General Metrology Terms and Definitions," JJF 1059.1-2012 "Assessment and Representation of Measurement Uncertainty" together constitute the basis for the preparation of this specification A series of specifications, this specification refers to JB/T 11104-2011 "Electronic Digital Display Inclination Ruler", JB/T 9344-1999 "Optical Inclinometer", JG142-2002 "Electronic Level for Construction", SJ/T 11276-2002 "Digital Specification for Angle Measuring Instruments.
This specification replaces JJF 1119-2004 "Electronic Level Calibration Specification" and JJF 1083-2002 "Optical Tilt" Compared with JJF 1119-2004 and JJF 1083-2002, the main technical changes are as follows.
---Expanded the scope of application of the specification, adding type II rectangular electronic digital display inclinometer, type III square box electronic digital display Inclinometer related items;
--- Classify the electronic level into the type I type strip electronic digital display inclinometer;
---Increase the parallelism between the working faces of the multi-working face electronic digital display inclinometer;
---Increased the verticality between the working faces of the electronic digital display inclinometer with multiple working faces;
--- Increase the uncertainty evaluation of the measurement result of the optical inclinometer indication error;
--- Revised the description of the calibration method for the zero value error of the electronic digital inclinometer;
--- Revised the description and calculation of the calibration method of the inclinometer indication value error;
--- Revised the description and calculation of the repeatability calibration method of the electronic digital inclinometer;
---Re-evaluated the uncertainty of the measurement result of the display value error of the electronic digital inclinometer;
--- Deleted the use of dodecahedron and autocollimator for indication error calibration in JJF 1083-2002 method;
--- Deleted the return error item in the measurement performance requirements of JJF 1119-2004;
--- Deleted the calculation examples of display error, repeatability of angle measurement, and return error in Appendix B of JJF 1119-2004;
--- Deleted the calculation example of the maximum indication error of the optical inclinometer in Appendix A of JJF 1083-2002.
The previous releases of JJF 1083-2002 are as follows.
---JJF 1083-2002;
---JJG104-1986.
The previous releases of JJF 1119-2004 are as follows.
---JJF 1119-2004.
Inclinometer Calibration Specifications
1 Scope
This specification applies to the calibration of electronic digital inclinometers and optical inclinometers.
2 Overview
Inclinometer is an instrument used to measure the inclination angle of the measured object relative to the horizontal plane or the angle between two measured objects.
Including electronic digital display inclinometer with electronic inclination sensor and optical inclinometer with mechanical inclination measuring mechanism. Inclinometer Widely used in machinery, automobiles, railways, construction, water conservancy and other related industries.
Fig.1 Type I strip electronic digital display inclinometer
1-display;2-level bubble;3-working surface;4-function key
Figure 2 Type II rectangular electronic digital display inclinometer
1-side working surface; 2-upper working surface; 3-display screen; 4-bottom working surface; 5-function key
Figure 3 Type III square box electronic digital display inclinometer
1-side working surface; 2-upper working surface; 3-display screen; 4-function key; 5-bottom working surface
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 11 pages — is available in the English PDF.
How to Download JJF 1915-2021
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1915-2021
$180.00