Valid

JJF 1904-2021Calibration Specification for Differential Accelerometer Amplifiers (English PDF)

差分式加速度传感器放大器校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JJF 1904-2021 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

February 23, 2021

Implementation date

August 23, 2021

Scope

JJF 1904-2021 is the English-translated version of 差分式加速度传感器放大器校准规范.

JJF 1904-2021 is the Chinese standard "Calibration Specification for Differential Accelerometer Amplifiers". Issued on 2021-02-23, in force from 2021-08-23.

Found what you need?

Document preview — JJF 1904-2021

Contents

  • Introduction (III)
  • 1 Scope (1)
  • 2 Reference documents (1)
  • 3 Term (1)
  • 3.1 Transmission coefficient (1)
  • 4 Overview (1)
  • 5 Measurement characteristics (2)
  • 5.1 Normalization error (2)
  • 5.2 Gain error(2)
  • 5.3 Non-linearity (2)
  • 5.4 Amplitude-frequency characteristics (2)
  • 5.5 Phase frequency characteristics (2)
  • 5.6 Low-pass filter characteristics (2)
  • 5.7 Noise floor (2)
  • 5.8 Excitation voltage (2)
  • 6 Calibration conditions (2)
  • 6.1 Environmental conditions (2)
  • 6.2 Standards or other equipment for calibration (2)
  • 6.2.1 Signal generator(2)
  • 6.2.2 Digital Voltmeter(2)
  • 6.2.3 Dynamic signal analyzer (2)
  • 7 Calibration items and calibration methods (2)
  • 7.1 Calibration items (2)
  • 7.2 Calibration method (2)
  • 7.2.1 Appearance and normal working inspection (2)
  • 7.2.2 Normalization error (3)
  • 7.2.3 Gain error(3)
  • 7.2.4 Non-linearity(4)
  • 7.2.5 Amplitude-frequency characteristics (4)
  • 7.2.6 Phase frequency characteristics (5)
  • 7.2.7 Low-pass filter characteristics (5)
  • 7.2.8 Noise floor(6)
  • 7.2.9 Excitation voltage(6)
  • 8 Calibration result expression (6)
  • 8.1 Calibration record (6)
  • 8.2 Calibration certificate (6)
  • 9 Re-calibration interval (6)
  • Appendix A A Differential Acceleration Sensor Simulator (7)
  • Appendix B Recommended Format of Original Calibration Record (8)
  • Appendix C Contents of Calibration Certificate (11)
  • Appendix D Examples of Uncertainty Evaluation (15)

1 Scope (1)

2 Reference documents (1)

3 Term (1)

3.1 Transmission coefficient (1)

4 Overview (1)

5 Measurement characteristics (2)

5.1 Normalization error (2)

5.2 Gain error(2)

5.3 Non-linearity (2)

5.4 Amplitude-frequency characteristics (2)

5.5 Phase frequency characteristics (2)

5.6 Low-pass filter characteristics (2)

5.7 Noise floor (2)

5.8 Excitation voltage (2)

6 Calibration conditions (2)

6.1 Environmental conditions (2)

6.2 Standards or other equipment for calibration (2)

6.2.1 Signal generator(2)
6.2.2 Digital Voltmeter(2)
6.2.3 Dynamic signal analyzer (2)

7 Calibration items and calibration methods (2)

7.1 Calibration items (2)

7.2 Calibration method (2)

7.2.1 Appearance and normal working inspection (2)
7.2.2 Normalization error (3)
7.2.3 Gain error(3)
7.2.4 Non-linearity(4)
7.2.5 Amplitude-frequency characteristics (4)
7.2.6 Phase frequency characteristics (5)
7.2.7 Low-pass filter characteristics (5)
7.2.8 Noise floor(6)
7.2.9 Excitation voltage(6)

8 Calibration result expression (6)

8.1 Calibration record (6)

8.2 Calibration certificate (6)

9 Re-calibration interval (6)

Appendix A A Differential Acceleration Sensor Simulator (7)

Appendix B Recommended Format of Original Calibration Record (8)

Appendix C Contents of Calibration Certificate (11)

Appendix D Examples of Uncertainty Evaluation (15)

Introduction

This specification is based on JJF 1071 "Rules for the Compilation of National Metrology and Calibration Specifications", JJF 1001 "General Metrology Terms and Definitions" "Evaluation and Expression of Measurement Uncertainty" and JJF 1059.1 "Measurement Uncertainty Evaluation and Expression" are the basic series of specifications.

The formulation of this specification refers to JJG233-2008 "Piezoelectric Accelerometer", JJG338-2013 "Charge Amplification Device", JJF 1156 "Terms and Definitions of Vibration and Shock Speed Measurement" and JJF 1269-2010 "Piezoelectric Integration Technical regulations such as "In-Circuit Sensor (IEPE) Amplifier Calibration Specification".

This specification is released for the first time.

Calibration Specification for Differential Acceleration Sensor Amplifier

1 Scope

This specification applies to the calibration of DC-excited differential acceleration sensor amplifiers (hereinafter referred to as amplifiers).

2 Reference documents JJG338 charge amplifier JJF 1156 Vibration impact speed measurement terms and definitions JJF 1269 Piezoelectric integrated circuit sensor (IEPE) amplifier calibration specification for dated reference documents, only the dated version applies to this specification; for all undated references the latest version (including all amendments) is applicable to this specification.

3 Term

3.1 Transmission coefficient the ratio of the output voltage of the amplifier to the input voltage.

4 overview

Amplifiers are widely used in signal adjustment of differential acceleration sensors such as piezoresistive and strain gauges. Amplifier pair plus the output signal of the speed sensor is amplified and adjusted. It is generally composed of a constant voltage DC excitation power supply, a servo feedback unit, it is composed of differential conversion stage, low-pass filter, amplifying unit and so on. Figure 1 is a typical amplifier for sensor signal conditioning block diagram.

Figure 1 Block diagram of amplifier conditioning sensor signal

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

How to Download JJF 1904-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1904-2021

$300.00