Valid

JJF 1902-2021Calibration Specification for Time Interval Generators (English PDF)

时间间隔发生器校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for JJF 1902-2021 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

February 23, 2021

Implementation date

August 23, 2021

Scope

JJF 1902-2021 is the English-translated version of 时间间隔发生器校准规范.

JJF 1902-2021 is the Chinese standard "Calibration Specification for Time Interval Generators". Issued on 2021-02-23, in force from 2021-08-23.

Found what you need?

Document preview — JJF 1902-2021

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 Reference documents (1)
  • 3 Overview (1)
  • 4 Measurement characteristics (2)
  • 4.1 Built-in time base oscillator (2)
  • 4.2 Time interval output (2)
  • 4.3 Pulse output (2)
  • 5 Calibration conditions (2)
  • 5.1 Environmental conditions (2)
  • 5.2 Measuring standards and other equipment (3)
  • 6 Calibration items and calibration methods (3)
  • 6.1 Calibration items (3)
  • 6.2 Calibration method (4)
  • 7 Expression of calibration results (7)
  • 8 Recalibration interval (8)
  • Appendix A Examples of Uncertainty Evaluation of Calibration Results for Major Items (9)
  • Appendix B. Original Record Format of Time Interval Generator Calibration (17)
  • Appendix C Time interval generator calibration certificate (inside page) format (23)

1 Scope (1)

2 Reference documents (1)

3 Overview (1)

4 Measurement characteristics (2)

4.1 Built-in time base oscillator (2)

4.2 Time interval output (2)

4.3 Pulse output (2)

5 Calibration conditions (2)

5.1 Environmental conditions (2)

5.2 Measuring standards and other equipment (3)

6 Calibration items and calibration methods (3)

6.1 Calibration items (3)

6.2 Calibration method (4)

7 Expression of calibration results (7)

8 Recalibration interval (8)

Appendix A Examples of Uncertainty Evaluation of Calibration Results for Major Items (9)

Appendix B. Original Record Format of Time Interval Generator Calibration (17)

Appendix C Time interval generator calibration certificate (inside page) format (23)

Introduction

This specification is based on JJF 1001-2011 "General Metrology Terms and Definitions", JJF 1071-2010 "National Metrology Compilation of Calibration Specification Compilation Rules and JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty".

This specification is a revision of JJG723-2008 "Time Interval Generator". The main revisions are as follows.

---According to JJG2007-2015 "Time and Frequency Measuring Instruments", the frequency accuracy is changed to relative frequency deviation;

---Expanded the time interval measurement range;

---Added calibration items for built-in time base and DC bias voltage;

---Detailed technical indicators of measurement characteristics.

The release status of previous versions of this specification.

---JJG723-2008;

---JJG723-1991;

---JJG803-1993.

Time interval generator calibration specification

1 Scope

This specification applies to the calibration of the generator with an output range of 1ns~10000s time interval.

2 Reference documents the following documents are cited in this specification.

Quartz crystal oscillator in JJG180 electronic measuring instrument JJG181 Quartz crystal frequency standard JJG292 Rubidium Atomic Frequency Standard JJG2007 Time and Frequency Measuring Instruments JJF 1180 Time-frequency measurement terms and definitions for dated reference documents, only the dated version applies to this specification; for all undated references the latest version (including all amendments) is applicable to this specification.

3 overview

The time interval generator is also called a time synthesizer, which is based on a quartz crystal oscillator or rubidium atomic frequency standard.

Clock, using digital synthesis technology to generate various types of time that can be set to pulse period, delay time, pulse width, etc.

A measuring instrument for interval signals. The time interval generator is widely used in various time control in the fields of navigation, communication, etc.

The system can be used as a standard source when verifying and calibrating time measuring instruments.

The output mode of the time interval generator includes the pulse period and pulse width of the single output pulse train, and the two output pulses.

The time interval between flush trains, etc. The time interval generator can have multiple output channels, and the output pulse polarity can be positive or negative.

Logic forward pulse and reverse pulse. Its principle block diagram is shown as in Fig. 1.

Figure 1 Principle of time interval generator

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

How to Download JJF 1902-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
22 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1902-2021

$600.00