Valid

JJF 1895-2021Calibration Specification for Semiconductor Devices DC and Low Frequency Parameters Test Equipment (English PDF)

半导体器件直流和低频参数测试设备校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (23 pages)

Need quotation for your management?

Get a formal quotation for JJF 1895-2021 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

February 23, 2021

Implementation date

August 23, 2021

Scope

JJF 1895-2021 is the English-translated version of 半导体器件直流和低频参数测试设备校准规范.

JJF 1895-2021 is the Chinese standard "Calibration Specification for Semiconductor Devices DC and Low Frequency Parameters Test Equipment". Issued on 2021-02-23, in force from 2021-08-23.

Found what you need?

Document preview — JJF 1895-2021

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 Overview (1)
  • 3 Measurement characteristics (1)
  • 3.1 DC resistance(1)
  • 3.2 Voltage output(1)
  • 3.3 Voltage indication (1)
  • 3.4 Current output (1)
  • 3.5 Current indication (1)
  • 3.6 Low frequency signal source (1)
  • 3.7 Low frequency h parameter(1)
  • 4 Calibration conditions (2)
  • 4.1 Environmental conditions (2)
  • 4.2 Equipment for calibration (2)
  • 5 Calibration items and calibration methods (3)
  • 5.1 Calibration items (3)
  • 5.2 Appearance and working normality inspection (3)
  • 5.3 DC resistance(3)
  • 5.4 Voltage output (4)
  • 5.5 Voltage indication (6)
  • 5.6 Current output (7)
  • 5.7 Current indication (9)
  • 5.8 Low frequency signal source(10)
  • 5.9 Low frequency h parameter(11)
  • 6 Calibration result expression (12)
  • 7 Re-calibration interval (12)
  • Appendix A Original Record Format (13)
  • Appendix B. Internal page format of calibration certificate (18)
  • Appendix C Calibration Uncertainty Evaluation Examples of Major Items (23)
  • Appendix D. Examples of structure diagrams, panels and test fixture terminals of the calibrated equipment (29)

1 Scope (1)

2 Overview (1)

3 Measurement characteristics (1)

3.1 DC resistance(1)

3.2 Voltage output(1)

3.3 Voltage indication (1)

3.4 Current output (1)

3.5 Current indication (1)

3.6 Low frequency signal source (1)

3.7 Low frequency h parameter(1)

4 Calibration conditions (2)

4.1 Environmental conditions (2)

4.2 Equipment for calibration (2)

5 Calibration items and calibration methods (3)

5.1 Calibration items (3)

5.2 Appearance and working normality inspection (3)

5.3 DC resistance(3)

5.4 Voltage output (4)

5.5 Voltage indication (6)

5.6 Current output (7)

5.7 Current indication (9)

5.8 Low frequency signal source(10)

5.9 Low frequency h parameter(11)

6 Calibration result expression (12)

7 Re-calibration interval (12)

Appendix A Original Record Format (13)

Appendix B. Internal page format of calibration certificate (18)

Appendix C Calibration Uncertainty Evaluation Examples of Major Items (23)

Appendix D. Examples of structure diagrams, panels and test fixture terminals of the calibrated equipment (29)

Introduction

This specification is based on JJF 1071-2010 "Rules for the Compilation of National Metrology and Calibration Specifications" and JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty" was compiled.

This specification is revised on the basis of JJG725-1991 "Transistor DC and Low Frequency Parameter Tester". versus Compared with JJG725-1991, in addition to editorial changes, the main technical changes are as follows.

---Revised calibration items such as current output and current indication;

---Added examples of uncertainty evaluation of calibration results for main items (see Appendix C).

The release status of previous versions of this specification.

---JJG725-1991.

Semiconductor device DC and low frequency parameters Test equipment calibration specification

1 Scope

This specification applies to the calibration of semiconductor device DC and low-frequency parameter test equipment.

2 overview

The semiconductor device DC and low-frequency parameter test equipment (hereinafter referred to as the calibrated equipment) consists of a bias voltage source and a bias voltage source.

It consists of current source, voltage measurement unit, current measurement unit, low-frequency signal source, etc., which are mainly used for direct current of various semiconductor devices.

Flow parameter, low frequency parameter test.

3 Metrological characteristics

3.1 DC resistance

Range. 0.005ohm~20Gohm, maximum allowable error. ± (0.1%~1%).

3.2 Voltage output

a) DC voltage. ± (0.01V~10kV), maximum allowable error. ± (0.1%~3%);

b) AC voltage. ± (0.1V~5000V), maximum allowable error. ± (1%~5%), frequency.

50Hz.

3.3 Voltage indication

a) DC voltage. ± (0.01V~10kV), maximum allowable error. ± (0.1%~3%);

b) AC voltage. ± (0.1V~5000V), maximum allowable error. ± (1%~5%), frequency.

50Hz.

3.4 Current output

a) DC current. ± (1nA~10A), maximum allowable error. ± (0.1%~1%);

b) Pulse current. ± (1A~1200A), maximum allowable error. ± (0.5%~3%), single pulse, Pulse width. 250µs~10ms.

3.5 Current indication

a) DC current. ± (1nA~10A), maximum allowable error. ± (0.1%~1%);

b) Pulse current. ± (1A~1200A), maximum allowable error. ± (0.5%~3%), single pulse, Pulse width. 250µs~10ms.

3.6 Low frequency signal source

a) Signal source output amplitude. 0.5V~1V, maximum allowable error. ± (1%~3%);

b) Frequency. 1kHz, maximum allowable error. ±1%.

3.7 Low frequency h parameter

a) hie, hib. 10ohm~10kohm, maximum allowable error. ±5%;

b)hoe, hob. 0.1µS~200µS, maximum allowable error. ±5%;

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 23 pages — is available in the English PDF.

How to Download JJF 1895-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
23 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1895-2021

$455.00