Valid

JJF 1890-2021Calibration Specification for Straightness Measuring Devices (English PDF)

医用分子筛制氧机校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (9 pages)

Need quotation for your management?

Get a formal quotation for JJF 1890-2021 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

February 23, 2021

Implementation date

August 23, 2021

Scope

JJF 1890-2021 is the English-translated version of 医用分子筛制氧机校准规范.

JJF 1890-2021 is the Chinese standard "Calibration Specification for Straightness Measuring Devices". Issued on 2021-02-23, in force from 2021-08-23.

Found what you need?

Document preview — JJF 1890-2021

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 Reference documents (1)
  • 3 Overview (1)
  • 4 Measurement characteristics (2)
  • 4.1 Error of micrometer indication value (2)
  • 4.2 Straightness error (2)
  • 4.3 Measurement repeatability (2)
  • 5 Calibration conditions (2)
  • 5.1 Environmental conditions (2)
  • 5.2 Calibration items and calibration standards (2)
  • 6 Calibration items and calibration methods (2)
  • 6.1 Error of micrometer indication value (3)
  • 6.2 Straightness error (3)
  • 6.3 Measurement repeatability (3)
  • 7 Expression of calibration results (3)
  • 8 Recalibration interval (3)
  • Appendix A. Example of segmented reconstruction data processing (4)
  • Appendix B Example of Uncertainty Evaluation of Straightness Error Measurement Results of Straightness Measuring Instrument (6)
  • Appendix C Contents of Calibration Certificate (8)

1 Scope (1)

2 Reference documents (1)

3 Overview (1)

4 Measurement characteristics (2)

4.1 Error of micrometer indication value (2)

4.2 Straightness error (2)

4.3 Measurement repeatability (2)

5 Calibration conditions (2)

5.1 Environmental conditions (2)

5.2 Calibration items and calibration standards (2)

6 Calibration items and calibration methods (2)

6.1 Error of micrometer indication value (3)

6.2 Straightness error (3)

6.3 Measurement repeatability (3)

7 Expression of calibration results (3)

8 Recalibration interval (3)

Appendix A. Example of segmented reconstruction data processing (4)

Appendix B Example of Uncertainty Evaluation of Straightness Error Measurement Results of Straightness Measuring Instrument (6)

Appendix C Contents of Calibration Certificate (8)

Introduction

JJF 1071 "Rules for the Compilation of National Metrology and Calibration Specifications", JJF 1001 "General Metrology Terms and Definitions" and JJF 1059.1 "Evaluation and Expression of Measurement Uncertainty" together constitutes a basic series that supports the formulation of this specification.

In the process of formulating this specification, refer to GB/T 11336-2004 "Straightness Error Detection", JB/T 11501-2013 "Air Floating Straightness Measuring Instrument".

This specification is released for the first time.

Calibration specification for straightness measuring instrument

1 Scope

This specification applies to the calibration of straightness measuring instruments.

2 Reference documents the following documents are cited in this specification.

GB/T 11336-2004 Straightness error detection JB/T 11501-2013 Air-floating straightness measuring instrument for dated reference documents, only the dated version applies to this specification; for all undated references the latest version (including all amendments) is applicable to this specification.

3 overview

The straightness measuring instrument is composed of a precision guide rail, a sliding seat and a micrometer indicator (instrument) (hereinafter referred to as a micrometer), etc.

When the sliding seat moves, the probe of the micrometer is in contact with the surface of the test piece, and the straightness error of the surface of the test piece is measured. its the main types are air-floating type and sliding type. The schematic diagrams are shown in Figure 1 and Figure 2 respectively.

Figure 1 Schematic diagram of air-floating straightness measuring instrument

1- rail; 2- column; 3- cross arm; 4- micrometer; 5- air-floating sliding seat

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 9 pages — is available in the English PDF.

How to Download JJF 1890-2021

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
9 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1890-2021

$210.00