Valid

JJF 1831-2020Calibration Specification for Spherometers (English PDF)

球径仪校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (14 pages)

Need quotation for your management?

Get a formal quotation for JJF 1831-2020 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2020

Implementation date

April 17, 2020

Scope

JJF 1831-2020 is the English-translated version of 球径仪校准规范.

JJF 1831-2020 is the Chinese standard "Calibration Specification for Spherometers".

Found what you need?

Document preview — JJF 1831-2020

National Standard of the People's Republic of China

ICS
17.040

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 Reference documents (1)
  • 3 Overview (1)
  • 4 Measurement characteristics (1)
  • 5 Calibration conditions (2)
  • 5.1 Environmental conditions (2)
  • 5.2 Measurement standards and supporting equipment (2)
  • 6 Calibration items and calibration methods (2)
  • 6.1 Description of calibration items (2)
  • 6.2 Measuring ring radius (3)
  • 6.3 Relative error of measurement of spherical curvature radius (4)
  • 6.4 Indication error of the vector height measuring mechanism (5)
  • 7 Expression of calibration results (5)
  • 8 Recalibration interval (5)
  • Appendix A Example of Uncertainty Evaluation of the Measured Value of Ring Radius by Spherometer (6)
  • Appendix B Examples of Uncertainty Evaluation of the Relative Error of the Spherical Radius of Curvature (10)
  • Appendix C Original record content and format (14)
  • Appendix D Contents of Calibration Certificate and Inner Page Format (15)

1 Scope (1)

2 Reference documents (1)

3 Overview (1)

4 Measurement characteristics (1)

5 Calibration conditions (2)

5.1 Environmental conditions (2)

5.2 Measurement standards and supporting equipment (2)

6 Calibration items and calibration methods (2)

6.1 Description of calibration items (2)

6.2 Measuring ring radius (3)

6.3 Relative error of measurement of spherical curvature radius (4)

6.4 Indication error of the vector height measuring mechanism (5)

7 Expression of calibration results (5)

8 Recalibration interval (5)

Appendix A Example of Uncertainty Evaluation of the Measured Value of Ring Radius by Spherometer (6)

Appendix B Examples of Uncertainty Evaluation of the Relative Error of the Spherical Radius of Curvature (10)

Appendix C Original record content and format (14)

Appendix D Contents of Calibration Certificate and Inner Page Format (15)

Introduction

This specification is based on JJF 1001-2011 "General Metrology Terms and Definitions", JJF 1071-2010 "National Metrology Calibration Specification Compilation Rules, JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty", JJF 1094-2002 the "Evaluation of the Characteristics of Measuring Instruments" is based and revised.

This specification is a revision of JJG401-1985.Compared with JJG401-1985, except for editorial changes, the main the contents to be revised are.

--- Use "relative error of spherical radius of curvature measurement" instead of "comprehensive error of spherical diameter meter", use "vector height measurement "Measurement mechanism" replaces "reading device";

---Specifies 3 measurement characteristics. the indication error of the vector height measuring mechanism, the radius of the measuring ring, and the radius of curvature of the spherical surface Relative error of measurement;

---The standard required for calibration has been adjusted, and the universal tool microscope, special parallel flat crystal, and vertical Reflective lighting device;

--- Canceled the method of "Using the universal tool microscope to verify the radius of the steel ball measuring ring";

---Added appendix content.

---Change the number of measurements of the measured vector height from 5 to 3.

The release status of previous versions of this specification.

---JJG401-1985.

Spherometer calibration specification

1 Scope

This specification applies to the calibration of contact spherometers.

2 Reference documents this specification refers to the following documents.

JJF 1071-2010 National Metrology and Calibration Specifications Compilation Rules GB/T 308.1-2013 Rolling bearing balls Part 1: Steel balls for dated reference documents, only the dated version applies to this specification; for undated references the latest version (including all amendments) is applicable to this specification.

3 overview

The contact ball diameter meter (hereinafter referred to as the ball diameter meter) is a measuring instrument used to measure the radius of curvature of the spherical surface.

It is used to measure the radius of curvature of the spherical surface of the optical panel, optical sample, spherical lens, spherical mirror, etc. Spherometer it is mainly composed of a measuring ring and a vector height measuring mechanism, which indirectly measures the curvature of the spherical surface by measuring the vector height of the spherical surface radius.

The measuring principle of the spherometer is shown in Figure 1 and Figure 2.The chord radius r in Figure 1 and Figure 2 is also measured by the spherometer the radius of the measuring ring in the characteristic.

Fig.1 The principle diagram of measuring the height of the vector using a steel ball type measuring ringFig.2 The principle diagram of measuring the height of the vector using a blade type measuring ring

Rc- the radius of curvature of the tested spherical surface; r- the radius of the chord; Rc- the radius of curvature of the tested spherical; r- the radius of the chord;

h- the measured value of the vector height measuring mechanism; rho- the steel ball radius h- the measured value of the vector height measuring mechanism

4 Measurement characteristics

4.1 Measure the radius of the ring.

4.2 The relative error of the measurement of the radius of curvature of the spherical surface.

4.3 Indication error of the vector height measuring mechanism.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 14 pages — is available in the English PDF.

How to Download JJF 1831-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
14 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1831-2020

$315.00