Valid

JJF 1814-2020Calibration Specification for Haze Tablets (English PDF)

雾度片校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (10 pages)

Need quotation for your management?

Get a formal quotation for JJF 1814-2020 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2020

Implementation date

April 17, 2020

Scope

JJF 1814-2020 is the English-translated version of 雾度片校准规范.

JJF 1814-2020 is the Chinese standard "Calibration Specification for Haze Tablets".

Found what you need?

Document preview — JJF 1814-2020

National Standard of the People's Republic of China

ICS
17.180

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 Reference documents (1)
  • 3 Term (1)
  • 3.1 Haze (1)
  • 3.2 Haze meter (1)
  • 4 Overview (1)
  • 5 Measurement characteristics (2)
  • 5.1 Haze value (2)
  • 5.2 Haze uniformity (2)
  • 5.3 Transmittance (2)
  • 5.4 Uniformity of transmittance (2)
  • 6 Calibration conditions (2)
  • 6.1 Environmental conditions (2)
  • 6.2 Measurement standards and other equipment (2)
  • 7 Calibration items and calibration methods (3)
  • 7.1 Appearance (3)
  • 7.2 Haze sheet value calibration (3)
  • 8 Presentation of calibration results (5)
  • 9 Recalibration interval (5)
  • Appendix A Recommended Format of Original Record of Haze Sheet Calibration (6)
  • Appendix B Recommended format of the inner page of the calibration certificate (7)
  • Appendix C Example of Uncertainty Evaluation for Haze Measurement Results of Calibration Haze Sheet (8)

1 Scope (1)

2 Reference documents (1)

3 Term (1)

3.1 Haze (1)

3.2 Haze meter (1)

4 Overview (1)

5 Measurement characteristics (2)

5.1 Haze value (2)

5.2 Haze uniformity (2)

5.3 Transmittance (2)

5.4 Uniformity of transmittance (2)

6 Calibration conditions (2)

6.1 Environmental conditions (2)

6.2 Measurement standards and other equipment (2)

7 Calibration items and calibration methods (3)

7.1 Appearance (3)

7.2 Haze sheet value calibration (3)

8 Presentation of calibration results (5)

9 Recalibration interval (5)

Appendix A Recommended Format of Original Record of Haze Sheet Calibration (6)

Appendix B Recommended format of the inner page of the calibration certificate (7)

Appendix C Example of Uncertainty Evaluation for Haze Measurement Results of Calibration Haze Sheet (8)

Introduction

JJF 1032 "Terms and Definitions of Optical Radiation Metrology", JJF 1071 "National Metrology and Calibration Specifications Compilation Rules Rules" and JJF 1059.1 "Measurement Uncertainty Evaluation and Representation" together constitute a basic series supporting the formulation of this specification.

This specification is released for the first time.

Haze sheet calibration specification

1 Scope

This specification applies to the calibration of standard haze sheets and working haze sheets, as well as the use of haze meters for plate, sheet, thin Calibration of haze and visible light transmittance of transparent materials such as film.

2 Reference documents this specification refers to the following documents.

JJF 1032 Terms and Definitions of Optical Radiation Metrology JJF 1303 Haze Meter Calibration Specification GB/T 2410 Determination of light transmittance and haze of transparent plastics ASTMD1003 Standard Test Method for Haze and Transmittance of Transparent Plastics (StandardTestMethod forHazeandLuminousTransmittanceofTransparentPlastics) for dated reference documents, only the dated version applies to this specification; for undated references the latest version (including all amendments) is applicable to this specification.

3 Term

3.1 Haze

The ratio of the diffuse transmittance taud of the sample to its total transmittance taut, multiplied by 100, the symbol is Hd, and the unit is 1.

taud

taut×

100 (1)

3.2 Hazemeter

An instrument for measuring haze. Integrating sphere method with specific geometric conditions is used for measurement. The instrument is mainly composed of integrating sphere, light Source, collimation system, sample chamber, light trap, standard reflector, photometric detector and signal processing.

4 overview

Haze is an important parameter describing the physical properties of transparent materials, and it characterizes the scattering and transmission characteristics of materials. fog Degree measurement has been widely used in plastic films, liquid crystal display materials, chemical raw materials, automotive safety glass, architectural glass Product testing and quality control in the fields of glass, face protection lenses, aerospace, etc. The haze sheet is passed as the haze measurement value the carrier and the measuring instrument calibrated by the haze meter can store the haze measurement value reliably, stably and conveniently.

The calibration and uniformity of the haze measurement value play an important role.

The haze of the haze sheet or transparent material is usually calibrated and measured with a haze calibration device or a haze meter. Haze film or the effective size of the haze measurement sample is larger than the opening size of the integrating sphere of the haze measurement device. For passing and saving fog metrics the recommended haze sheet dimensions are 50mm×50mm square or phi60mm round, and the effective haze test at the center the area is not less than phi30mm to meet the measurement requirements of the haze meter.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 10 pages — is available in the English PDF.

How to Download JJF 1814-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
10 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1814-2020

$225.00