JJF 1811-2020Calibration Specification for Bursting Strength Testers for Paper(Board) (English PDF)
纸张(板)耐破度仪校准规范
This is a limited preview
Buy now to download the full PDF (12 pages)
Need quotation for your management?
Get a formal quotation for JJF 1811-2020 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2020
Implementation date
April 17, 2020
Scope
JJF 1811-2020 is the English-translated version of 纸张(板)耐破度仪校准规范.
JJF 1811-2020 is the Chinese standard "Calibration Specification for Bursting Strength Testers for Paper(Board)".
Found what you need?
Document preview — JJF 1811-2020
National Standard of the People's Republic of China
- ICS
- 17.100
Contents
- Introduction (II)
- 1 Scope (1)
- 2 References (1)
- 3 Terms and units of measurement (1)
- 3.1 Terminology (1)
- 3.2 Unit of measurement (1)
- 4 Overview (1)
- 5 Metrological characteristics (2)
- 5.1 Related parameters of pressure indication (2)
- 5.2 Tightness (2)
- 5.3 Elastic resistance of the film (2)
- 5.4 Indicating value of clamping pressure indicator (2)
- 6 Calibration conditions (2)
- 6.1 Environmental conditions (2)
- 6.2 Measurement standards and other equipment (2)
- 7 Calibration items and calibration methods (3)
- 7.1 Calibration items (3)
- 7.2 Calibration method (3)
- 8 Expression of calibration results (4)
- 9 Recalibration time interval (4)
- Appendix A Calibration Record Format of Paper (Board) Bursting Meter (5)
- Appendix B Calibration Certificate (Inner Page) Format (6)
- Appendix C. Evaluation Examples of Measurement Uncertainty of Pressure Indication Error of Paper (Board) Burst Tester (7)
- Appendix D Example of Uncertainty Evaluation of the Error in the Value of the Clamping Pressure Indicator (10)
1 Scope (1)
2 References (1)
3 Terms and units of measurement (1)
3.1 Terminology (1)
3.2 Unit of measurement (1)
4 Overview (1)
5 Metrological characteristics (2)
5.1 Related parameters of pressure indication (2)
5.2 Tightness (2)
5.3 Elastic resistance of the film (2)
5.4 Indicating value of clamping pressure indicator (2)
6 Calibration conditions (2)
6.1 Environmental conditions (2)
6.2 Measurement standards and other equipment (2)
7 Calibration items and calibration methods (3)
7.1 Calibration items (3)
7.2 Calibration method (3)
8 Expression of calibration results (4)
9 Recalibration time interval (4)
Appendix A Calibration Record Format of Paper (Board) Bursting Meter (5)
Appendix B Calibration Certificate (Inner Page) Format (6)
Appendix C. Evaluation Examples of Measurement Uncertainty of Pressure Indication Error of Paper (Board) Burst Tester (7)
Appendix D Example of Uncertainty Evaluation of the Error in the Value of the Clamping Pressure Indicator (10)
Introduction
This specification is based on JJF 1001-2011 "General Measurement Terms and Definitions", JJF 1059.1-2012 "Measurement Basic Evaluation Regulations and Evaluation" and JJF 1071-2010 "Rules for Compiling National Measurement and Calibration Specifications" Fan to develop.
This specification mainly refers to GB/T 454-2002 "Determination of paper bursting strength", GB/T 1539-2007 "Cardboard "Determination of bursting strength" and QB/T 1057-2004 "Paper and cardboard bursting strength tester" compiled.
This specification is the first release.
Calibration Specification for Paper (Board) Burst Tester
1 Scope
This specification is applicable to the calibration of paper burst tester, cardboard burst tester (hereinafter referred to as burst tester), other low strength the calibration of the burst tester for sheet materials can be performed by reference.
2 Reference documents this specification refers to the following documents.
JJG52-2013 elastic element type general pressure gauge, pressure vacuum gauge and vacuum gauge JJG875 digital pressure gauge GB/T 454-2002 Determination of bursting strength of paper GB/T 1539-2007 Determination of bursting strength of cardboard GB/T 4687-2007 paper, cardboard, pulp and related terms QB/T 1057-2004 Paper and Cardboard Bursting Tester for dated reference documents, only the dated version applies to this specification; for those without date references the latest version (including all amendments) is applicable to this specification.
3 Terms and units of measurement
3.1 Terminology
3.1.1 bursting strength Under the pressure of the hydraulic system, the maximum pressure when the elastic film pushes against the circular area of the paper or cardboard sample.
[GB/T 4687-2007,4.24]
3.1.2 Bursting strength tester Instrument for measuring bursting strength of paper, cardboard and other low-strength sheet materials.
3.1.3 clamping system clamping system the clamping system of the rupture tester is composed of a clamping pressure indicator, an upper chuck, a lower chuck, and a pneumatic circuit.
Hold the sample evenly.
3.2 Unit of measurement the legal unit of measurement used by the burst tester is Pa (Pascal), or its decimal multiple unit. kPa, MPa, etc.
unit of measurement.
4 Overview
The burst resistance instrument is composed of a pressure measurement system, a clamping system, a hydraulic system, etc., which is tested for the burst resistance of paper and cardboard Special measuring instruments.
According to Pascal's law, the instrument is filled with silicone oil (or its (Other media) as the medium for pressure transmission, when the hydraulic system is pressurized, the adhesive film is raised by the pressure of silicone oil, which is raised and clamped.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 12 pages — is available in the English PDF.
How to Download JJF 1811-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1811-2020
$255.00