JJF 1808-2020Calibration Specification for Bullet Speed Measuring Devices (English PDF)
枪弹测速仪校准规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JJF 1808-2020 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2020
Implementation date
April 17, 2020
Scope
JJF 1808-2020 is the English-translated version of 枪弹测速仪校准规范.
JJF 1808-2020 is the Chinese standard "Calibration Specification for Bullet Speed Measuring Devices".
Found what you need?
Document preview — JJF 1808-2020
National Standard of the People's Republic of China
- ICS
- 17.080
Contents
- Introduction (II)
- 1 Scope (1)
- 2 Reference documents (1)
- 3 Overview (1)
- 4 Measurement characteristics (2)
- 5 Calibration conditions (2)
- 5.1 Environmental conditions (2)
- 5.2 Measuring equipment and other equipment(2)
- 6 Calibration items and calibration methods (3)
- 6.1 Calibration items (3)
- 6.2 Calibration method (3)
- 7 Expression of calibration results (5)
- 8 Recalibration interval (6)
- Appendix A Calibration Original Record Format (7)
- Appendix B Internal page format of calibration certificate (9)
- Appendix C Evaluation Example of Measurement Uncertainty (10)
- Appendix D Standard Time Interval and Speed Comparison Table (17)
1 Scope (1)
2 Reference documents (1)
3 Overview (1)
4 Measurement characteristics (2)
5 Calibration conditions (2)
5.1 Environmental conditions (2)
5.2 Measuring equipment and other equipment(2)
6 Calibration items and calibration methods (3)
6.1 Calibration items (3)
6.2 Calibration method (3)
7 Expression of calibration results (5)
8 Recalibration interval (6)
Appendix A Calibration Original Record Format (7)
Appendix B Internal page format of calibration certificate (9)
Appendix C Evaluation Example of Measurement Uncertainty (10)
Appendix D Standard Time Interval and Speed Comparison Table (17)
Introduction
This specification is based on JJF 1071-2010 "Rules for the Compilation of National Metrology and Calibration Specifications" and JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty" was compiled.
This specification is released for the first time.
Calibration specification for bullet speedometer
1 Scope
This specification is applicable to bullet speedometers that use the photoelectric speed measurement principle and the speed range is 10m/s~1000m/s.
For calibration, this specification does not apply to bullet speedometers with other speed measurement principles.
2 Reference documents this specification refers to the following documents.
GA/T 718 The Forensic Scientific Identification Criteria of Firearms GA/T 824 Code for the construction of forensic science bullet inspection laboratory for dated reference documents, only the dated version applies to this specification; for undated reference documents, the latest version (including all amendments) is applicable to this specification.
3 overview
The bullet velocimeter is a measurement of various barrel shooting weapons (using tubular equipment to launch projectiles, usually smaller than 20mm) instruments or equipment with parameters such as the firing speed and specific kinetic energy of the metal or other material projectiles, which work the principle is that the bullet passes through the two layers of photoelectric screens in turn to generate photoelectric signals, and the time interval measurement unit measures the trigger light of the front and rear screens.
The time interval of the electrical signal is combined with the distance between the two screens for data processing to obtain the bullet speed. The bullet speedometer is generally composed of it is composed of photoelectric screen, speed measurement and display unit and output printing part, which is widely used in criminal investigation, Forensic appraisal and research on gun performance, etc.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JJF 1808-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1808-2020
$330.00