Valid

JJF 1805-2020Calibration Specification for Frequency and Phase Offset Generators (English PDF)

相位微跃器校准规范

Preview PDF

This is a limited preview

Buy now to download the full PDF (22 pages)

Need quotation for your management?

Get a formal quotation for JJF 1805-2020 in 30 minutes.

Issued by

State Administration for Market Regulation

Level / Type

National · Mandatory

Issue date

January 1, 2020

Implementation date

April 17, 2020

Scope

JJF 1805-2020 is the English-translated version of 相位微跃器校准规范.

JJF 1805-2020 is the Chinese standard "Calibration Specification for Frequency and Phase Offset Generators".

Found what you need?

Document preview — JJF 1805-2020

National Standard of the People's Republic of China

ICS
17.080

Contents

  • Introduction (II)
  • 1 Scope (1)
  • 2 Reference documents (1)
  • 3 Overview (1)
  • 4 Measurement characteristics (1)
  • 5 Calibration conditions (2)
  • 5.1 Environmental conditions (2)
  • 5.2 Measurement standards and other equipment (2)
  • 6 Calibration items and calibration methods (4)
  • 6.1 Calibration items (4)
  • 6.2 Calibration method (4)
  • 7 Expression of calibration results (10)
  • 8 Recalibration interval (10)
  • Appendix A Original Record Format (11)
  • Appendix B Format of Calibration Certificate (Inner Page) (17)
  • Appendix C Example of Calibration Uncertainty Evaluation (21)

1 Scope (1)

2 Reference documents (1)

3 Overview (1)

4 Measurement characteristics (1)

5 Calibration conditions (2)

5.1 Environmental conditions (2)

5.2 Measurement standards and other equipment (2)

6 Calibration items and calibration methods (4)

6.1 Calibration items (4)

6.2 Calibration method (4)

7 Expression of calibration results (10)

8 Recalibration interval (10)

Appendix A Original Record Format (11)

Appendix B Format of Calibration Certificate (Inner Page) (17)

Appendix C Example of Calibration Uncertainty Evaluation (21)

Introduction

This specification is based on JJF 1071-2010 "Rules for the Compilation of National Metrology and Calibration Specifications" and JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty" was compiled.

This specification is released for the first time.

Calibration specification for phase micro jumper

1 Scope

This specification applies to the calibration of phase micro-hops with input frequencies of 5MHz, 10MHz, and 100MHz.

2 Reference documents this specification refers to the following documents.

JJF 1001 General measurement terms and definitions for dated reference documents, only the dated version applies to this specification; for undated references the latest version (including all amendments) is applicable to this specification.

3 overview

The phase micro jumper is a kind of locking the input frequency signal f0, adjusting it within a certain range and outputting it.

A device that outputs time-frequency signals. When working, the local crystal oscillator is locked to the external input frequency signal f0.

When the precision adjustment deltaf is applied to the loop, the adjusted time and frequency signals are generated. Adjusted frequency the signal generates a local 1PPS signal through frequency division, and the external 1PPS signal can initially synchronize the local output 1PPS.

By adjusting the phase of the frequency signal, the purpose of precisely adjusting the phase of 1PPS is achieved. The working principle of the phase micro jumper is shown in the figure 1 shown.

Phase micro-steps are widely used in time and frequency control, time keeping, satellite navigation and metering.

Figure 1 Working principle diagram of phase micro-hop

4 Measurement characteristics

4.1 Input power range. (7~15)dBm.

4.2 Output power. (10~17)dBm.

4.3 Harmonic distortion. <=-40dBc.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 22 pages — is available in the English PDF.

How to Download JJF 1805-2020

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
22 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JJF 1805-2020

$455.00