JJF 1804-2020Calibration Specification for Optical Fiber Bragg Grating Sensor Network Analyzers (English PDF)
布拉格光纤光栅传感网格分析仪校准规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JJF 1804-2020 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2020
Implementation date
April 17, 2020
Scope
JJF 1804-2020 is the English-translated version of 布拉格光纤光栅传感网格分析仪校准规范.
JJF 1804-2020 is the Chinese standard "Calibration Specification for Optical Fiber Bragg Grating Sensor Network Analyzers".
Found what you need?
Document preview — JJF 1804-2020
National Standard of the People's Republic of China
- ICS
- 17.180
Contents
- Introduction (II)
- 1 Scope (1)
- 2 Reference documents (1)
- 3 Overview (1)
- 4 Measurement characteristics (2)
- 5 Calibration conditions (2)
- 6 Calibration items and calibration methods (3)
- 7 Calibration results (7)
- 8 Recalibration interval (7)
- Appendix A Reference Format of Calibration Original Record (8)
- Appendix B Reference Format of the Internal Page of the Calibration Certificate (10)
- Appendix C Example of Calibration Uncertainty Evaluation (11)
1 Scope (1)
2 Reference documents (1)
3 Overview (1)
4 Measurement characteristics (2)
5 Calibration conditions (2)
6 Calibration items and calibration methods (3)
7 Calibration results (7)
8 Recalibration interval (7)
Appendix A Reference Format of Calibration Original Record (8)
Appendix B Reference Format of the Internal Page of the Calibration Certificate (10)
Appendix C Example of Calibration Uncertainty Evaluation (11)
Introduction
JJF 1071-2010 "Rules for the Compilation of National Metrology and Calibration Specifications", JJF 1001-2011 "General Metrology Terms Language" and JJF 1059.1-2012 "Evaluation and Representation of Measurement Uncertainty" together constitute the Basic series of specifications.
This specification is released for the first time.
Calibration specification for Bragg fiber grating sensor network analyzer
1 Scope
This specification is applicable to the calibration of the Bragg fiber grating sensor network analyzer and other instruments that measure the Bragg fiber grating sensor signal.
2 Reference documents this specification refers to the following documents.
JJF 1199 "Calibration Specification for Optical Attenuator for Communication" for dated reference documents, only the dated version applies to this specification; for undated reference documents, the latest version (including all amendments) is applicable to this specification.
3 overview
Fiber Bragg grating sensors are used to monitor various dynamic or static signals such as temperature, strain, mechanical waves and other physical parameters.
Number of important sensors. Bragg fiber grating sensor network analyzer (also known as fiber grating sensor demodulator, the following is abbreviated Called "fiber grating sensor network analyzer") as the signal demodulation in high-performance Bragg fiber grating sensor system the main function of the unit is to monitor and analyze the central wavelength of the fiber grating and its variation.
Existing fiber grating sensor network analyzers are mainly divided into two categories. broadband light source type and swept frequency light source type.
The measurement principle of the broadband light source fiber grating sensor network analyzer is. the laser light emitted from the broadband light source passes through the ring the reflected light is output to the fiber grating, and the reflected light enters the detection and demodulation unit through the circulator, and then undergoes signal processing and finally displays the measurement results are shown. The schematic diagram of the measurement principle is shown in Figure 1.
Figure 1 Measurement principle diagram of broadband light source type fiber grating sensor network analyzer
The measurement principle of the swept-frequency light source fiber grating sensor network analyzer is to use a semiconductor amplifier module and a tunable filter.
The wave device is composed of a swept frequency light source, which concentrates the instantaneous energy to a single wavelength, and the wavelength is continuously tuned. The light source and detection use the same Frequency synchronization measurement. The return signal of the fiber grating is compared with the built-in etalon of the instrument to obtain the the wavelength value and the schematic diagram of the measurement principle are shown in Figure 2.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JJF 1804-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1804-2020
$300.00