JJF 1801-2020Calibration Specification for Linear Velocity Measuring Instrument (English PDF)
线速度测量仪校准规范
This is a limited preview
Buy now to download the full PDF (13 pages)
Need quotation for your management?
Get a formal quotation for JJF 1801-2020 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2020
Implementation date
April 17, 2020
Scope
JJF 1801-2020 is the English-translated version of 线速度测量仪校准规范.
JJF 1801-2020 is the Chinese standard "Calibration Specification for Linear Velocity Measuring Instrument".
Found what you need?
Document preview — JJF 1801-2020
National Standard of the People's Republic of China
- ICS
- 17.160
Contents
- Introduction (II)
- 1 Scope (1)
- 2 Reference documents (1)
- 3 Term (1)
- 4 Overview (1)
- 5 Measurement characteristics (2)
- 6 Calibration conditions (2)
- 6.1 Environmental conditions (2)
- 6.2 Measurement standards and other equipment (2)
- 7 Calibration items and calibration methods (3)
- 7.1 Calibration items (3)
- 7.2 Calibration method (3)
- 8 Calibration result expression (5)
- 9 Recalibration interval (5)
- Appendix A. Schematic diagram of calibration method for linear velocity measuring instrument (6)
- Appendix B Calibration Record of Linear Velocity Measuring Instrument (7)
- Appendix C Example of Uncertainty Evaluation of Linear Velocity Indication Error of Contact Linear Velocity Measuring Instrument (8)
- Appendix D Example of Uncertainty Evaluation of Linear Velocity Indication Error of Double-point Linear Velocity Measuring Instrument (11)
1 Scope (1)
2 Reference documents (1)
3 Term (1)
4 Overview (1)
5 Measurement characteristics (2)
6 Calibration conditions (2)
6.1 Environmental conditions (2)
6.2 Measurement standards and other equipment (2)
7 Calibration items and calibration methods (3)
7.1 Calibration items (3)
7.2 Calibration method (3)
8 Calibration result expression (5)
9 Recalibration interval (5)
Appendix A. Schematic diagram of calibration method for linear velocity measuring instrument (6)
Appendix B Calibration Record of Linear Velocity Measuring Instrument (7)
Appendix C Example of Uncertainty Evaluation of Linear Velocity Indication Error of Contact Linear Velocity Measuring Instrument (8)
Appendix D Example of Uncertainty Evaluation of Linear Velocity Indication Error of Double-point Linear Velocity Measuring Instrument (11)
Introduction
This specification is based on JJF 1071 "Rules for the Compilation of National Metrology and Calibration Specifications", JJF 1059.1 "Measuring Uncertainty "Assessment and Representation" and other measurement technical specifications are compiled.
This specification mainly refers to JJG105 "speed meter", JJG326 "speed standard device", JJF 1193 "non-connected Measurement technical specifications such as the Calibration Specification for Touch-Type Automobile Speedometer, JJF 1156 "Terms and Definitions for Vibration and Impact Speed Measurement".
This specification is released for the first time.
Calibration specification for linear velocity measuring instrument
1 Scope
This specification applies to (0.1~4)m/s contact linear velocity measuring instrument and (0.3~30)m/s double-point linear velocity for the calibration of measuring instruments, other linear velocity measuring instruments can be calibrated with reference to this specification.
2 Reference documents this specification refers to the following documents.
JJG105 Tachometer
JJG326 Speed standard device JJF 1156 Vibration impact speed measurement terms and definitions JJF 1193 Non-contact car speedometer calibration specification for dated reference documents, only the dated version applies to this specification; for undated reference documents, the latest version (including all amendments) is applicable to this specification.
3 term
3.1 Linear speed
The displacement of any point on the rotating rigid body in unit time. It can be used to describe the motion characteristics of any point on a rotating rigid body.
3.2 Two-point linear velocity measuring instrument A measuring instrument that measures the linear velocity of a rotating rigid body or the linear velocity of an object moving in a straight line with two measuring points at a fixed position.
4 overview
Linear speed measuring instruments are divided into contact linear speed measuring instruments and non-contact linear speed measuring instruments. Contact line speed the degree measuring instrument is generally composed of a speed plate connected with a front shaft and a collection part. When the working surface of the speed plate is when the measured object is in contact, the linear velocity of the measured object is measured according to the circumference and speed of the speed plate. Commonly used non-contact line the speed measuring instrument is a two-point linear speed measuring instrument, which is composed of a pair of switch sensors and supporting collectors.
When the two sensors are firmly installed on the path of the measured object at a certain distance, by measuring the measured object the length of the path between the two sensors and the time when the measured object triggers the two sensors to calculate the line of the object speed. Figure 1 is a block diagram of the working principle of the contact linear velocity measuring instrument, and Figure 2 is the working principle of the double-point linear velocity measuring instrument the schematic block diagram, Appendix A is a schematic diagram of the calibration method.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 13 pages — is available in the English PDF.
How to Download JJF 1801-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1801-2020
$255.00