JJF 1797-2020Calibration Specification for Measuring Instruments for Overall Speech Characteristics of Intercom Systems (English PDF)
对讲系统全程语音特性测量仪校准规范
This is a limited preview
Buy now to download the full PDF (13 pages)
Need quotation for your management?
Get a formal quotation for JJF 1797-2020 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2020
Implementation date
April 17, 2020
Scope
JJF 1797-2020 is the English-translated version of 对讲系统全程语音特性测量仪校准规范.
JJF 1797-2020 is the Chinese standard "Calibration Specification for Measuring Instruments for Overall Speech Characteristics of Intercom Systems".
Found what you need?
Document preview — JJF 1797-2020
National Standard of the People's Republic of China
- ICS
- 17.140
Contents
- Introduction (II)
- 1 Scope (1)
- 2 Reference documents (1)
- 3 Terms and measurement units (1)
- 3.1 Full voice features (1)
- 3.2 Full-range loudness rating (1)
- 3.3 Mouth reference point (1)
- 4 Overview (2)
- 5 Measurement characteristics (2)
- 5.1 The sound pressure level at the reference point of the simulated mouth at the transmitter (2)
- 5.2 The deviation of the simulated voice at the sender from the standard voice (2)
- 5.3 Sound pressure level frequency response at the receiving end (2)
- 5.4 Sound pressure level linearity at the receiving end (2)
- 5.5 Frequency response of loudness level at the receiving end (2)
- 5.6 The receiving end loudness level is linear (3)
- 6 Calibration conditions (3)
- 6.1 Environmental conditions (3)
- 6.2 Measurement standards and other equipment (3)
- 7 Calibration items and calibration methods (3)
- 7.1 Calibration items (3)
- 7.2 Check before calibration (4)
- 7.3 Sound pressure level at the reference point of the simulated mouth at the transmitter (4)
- 7.4 The deviation of the simulated voice at the transmitter relative to the standard voice (5)
- 7.5 Frequency response of sound pressure level at receiving end (5)
- 7.6 Sound pressure level linearity at the receiving end (6)
- 7.7 Loudness level frequency response at the receiving end (6)
- 7.8 Linearity of loudness level at the receiving end (7)
- 8 Calibration result expression (7)
- 8.1 Calibration data processing (7)
- 8.2 Calibration certificate (7)
- 8.3 Evaluation of Uncertainty of Measurement Results (7)
- 9 Re-calibration interval (7)
- Appendix A. Contents and recommended format of calibration certificate (8)
- Appendix B Evaluation Example of Uncertainty of Measurement Results (12)
1 Scope (1)
2 Reference documents (1)
3 Terms and measurement units (1)
3.1 Full voice features (1)
3.2 Full-range loudness rating (1)
3.3 Mouth reference point (1)
4 Overview (2)
5 Measurement characteristics (2)
5.1 The sound pressure level at the reference point of the simulated mouth at the transmitter (2)
5.2 The deviation of the simulated voice at the sender from the standard voice (2)
5.3 Sound pressure level frequency response at the receiving end (2)
5.4 Sound pressure level linearity at the receiving end (2)
5.5 Frequency response of loudness level at the receiving end (2)
5.6 The receiving end loudness level is linear (3)
6 Calibration conditions (3)
6.1 Environmental conditions (3)
6.2 Measurement standards and other equipment (3)
7 Calibration items and calibration methods (3)
7.1 Calibration items (3)
7.2 Check before calibration (4)
7.3 Sound pressure level at the reference point of the simulated mouth at the transmitter (4)
7.4 The deviation of the simulated voice at the transmitter relative to the standard voice (5)
7.5 Frequency response of sound pressure level at receiving end (5)
7.6 Sound pressure level linearity at the receiving end (6)
7.7 Loudness level frequency response at the receiving end (6)
7.8 Linearity of loudness level at the receiving end (7)
8 Calibration result expression (7)
8.1 Calibration data processing (7)
8.2 Calibration certificate (7)
8.3 Evaluation of Uncertainty of Measurement Results (7)
9 Re-calibration interval (7)
Appendix A. Contents and recommended format of calibration certificate (8)
Appendix B Evaluation Example of Uncertainty of Measurement Results (12)
Introduction
This specification is compiled in accordance with the requirements and format of JJF 1071-2010 "Rules for the Compilation of National Metrology and Calibration Specifications".
This specification mainly refers to GB 31070.1-2014 ``Lou Apartment Intercom System Part 1: General Technical Requirements Requirements", IEC 62820-1-1:2016 "Louyu Intercom System Part 1-1.System Requirements---General Rules" (Buildingintercomsystems-Part 1-1.Systemrequirements-General) the technical requirements for measuring instruments of the fixed value test, and JJG869-2002 "Telephone Electroacoustic Tester", ITU-T P.501 "Test signal for telephone measurement" (Testsignalsforuseintelephonometry).
This specification is released for the first time.
Calibration specification for the whole process voice characteristic measuring instrument of the intercom system
1 Scope
This specification applies to the frequency range of 100Hz~8kHz, and is used for the whole process of evaluating the sound quality of intercom systems and other products.
Tone characteristic measuring instrument calibration.
2 Reference documents this specification refers to the following documents.
JJG175-2015 working standard microphone (electrostatic exciter method) JJG449-2014 Octave and Fractional Octave Filter JJG869-2002 Telephone Electroacoustic Tester JJG1019-2007 working standard microphone (coupling cavity comparison method) JJF 1034-2005 Acoustic measurement terms and definitions JJF 1147-2006 Calibration specification for acoustic characteristics of anechoic room and semi-anechoic room JJF 1580-2016 Calibration Specification for Artificial Mouth GB/T 3102.7 Acoustic quantities and units GB/T 31070.1-2014 Building Intercom System Part 1: General Technical Requirements IEC 62820-1-1:2016 Building Intercom System Part 1-1.System Requirements---General (Building intercomsystems-Part 1-1.Systemrequirements-General) ITU-TP.501 Test signal for telephone measurement (Testsignalsforuseintelephonometry) for dated reference documents, only the dated version applies to this specification; for undated references the latest version (including all amendments) is applicable to this specification.
3 Terms and units of measurement this specification adopts the quantities and units specified in GB/T 3102.7.
The following terms and definitions defined by JJF 1034-2005 are applicable to this specification.
3.1 Overalspeechcharacteristic the quality of the voice signal is maintained during the process of sending, spreading and receiving in the air.
3.2 Overall loudness rating overalloudnessrating OLR the loudness value from the reference point of the transmitting end mouth to the reference point of the receiving end ear.
Note. The unit of the overall loudness evaluation value is dB.
[GB 31070.1-2014, definition 3.1.6]
3.3 Mouthreferencepoint MRP
a) The loudness rating is on the reference axis, 25mm from the point directly in front of the lip plane.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 13 pages — is available in the English PDF.
How to Download JJF 1797-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1797-2020
$270.00