JJF 1796-2020Calibration Specification for Retroreflective Standards (English PDF)
逆反射标准器校准规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JJF 1796-2020 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2020
Implementation date
April 17, 2020
Scope
JJF 1796-2020 is the English-translated version of 逆反射标准器校准规范.
JJF 1796-2020 is the Chinese standard "Calibration Specification for Retroreflective Standards".
Found what you need?
Document preview — JJF 1796-2020
National Standard of the People's Republic of China
- ICS
- 17.180
Contents
- Introduction (II)
- 1 Scope (1)
- 2 Reference documents (1)
- 3 Term (1)
- 4 Overview (2)
- 5 Measurement characteristics (2)
- 6 Calibration conditions (4)
- 7 Calibration items and calibration methods (6)
- 8 Calibration results (7)
- 9 Recheck interval (7)
- Appendix A Calibration record style of retroreflective standard device (8)
- Appendix B Retroreflective Standard Calibration Certificate Information and Inner Page (13)
- Appendix C Example of Uncertainty Evaluation of Retroreflective Value Calibration of Retroreflective Standards (14)
1 Scope (1)
2 Reference documents (1)
3 Term (1)
4 Overview (2)
5 Measurement characteristics (2)
6 Calibration conditions (4)
7 Calibration items and calibration methods (6)
8 Calibration results (7)
9 Recheck interval (7)
Appendix A Calibration record style of retroreflective standard device (8)
Appendix B Retroreflective Standard Calibration Certificate Information and Inner Page (13)
Appendix C Example of Uncertainty Evaluation of Retroreflective Value Calibration of Retroreflective Standards (14)
Introduction
This specification is based on JJF 1071-2010 "Rules for the Compilation of National Metrology and Calibration Specifications", JJF 1059.1-2012 "Evaluation and Expression of Measurement Uncertainty" will be formulated.
This specification is released for the first time.
Calibration specification for retroreflective standards
1 Scope
This specification applies to the calibration of retroreflective standards.
2 Reference documents this specification refers to the following documents.
JJF 1059.1 Evaluation and expression of measurement uncertainty GB/T 18833 Road traffic reflective film GB/T 24717 Road pre-formed marking tape GB/T 24725 Protruding road signs GB/T 26377 Retroreflective measuring instrument JT/T 688-2007 Retroreflective terminology for dated reference documents, only the dated version applies to this specification; for undated reference documents, the latest version (including all amendments) is applicable to this specification.
3 term
The following terms and definitions defined in JT/T 688-2007 apply to this specification.
3.1 Retroreflectivestandard Certified reference material used to calibrate retroreflective measuring instruments.
3.2 datummark
Use the arrow to mark on the back of the retroreflective standard or an appropriate position to indicate the direction of sample placement during calibration.
The arrow direction is 0° reference direction (referred to as "reference direction"), which can be changed by rotating the corresponding angle counterclockwise during calibration.
Change the reference direction.
3.3 retroreflection
Reflected light is a kind of reflection that returns from the opposite direction close to the incident light.
[JT/T 688-2007,2.1]
3.4 entrance angle
The angle between the illumination axis and the reference axis is represented by beta.
Note. The incident angle beta is decomposed into two components beta1 and beta2 in the goniometer system, usually not greater than 90°.
[JT/T 688-2007,2.21]
3.5 Observation Angle the angle between the illumination axis and the observation axis is represented by alpha.
Note. The observation angle is not a negative value, usually less than 2°.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
How to Download JJF 1796-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1796-2020
$345.00