JJF 1784-2019Program of Pattern Evaluation for Total Stations (English PDF)
全站仪型式评价大纲
This is a limited preview
Buy now to download the full PDF (47 pages)
Need quotation for your management?
Get a formal quotation for JJF 1784-2019 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2019
Implementation date
March 31, 2020
Scope
JJF 1784-2019 is the English-translated version of 全站仪型式评价大纲.
JJF 1784-2019 is the Chinese standard "Program of Pattern Evaluation for Total Stations".
Found what you need?
Document preview — JJF 1784-2019
National Standard of the People's Republic of China
- ICS
- 17.040
Contents
- Introduction (III)
- 1 Scope (1)
- 2 References (1)
- 3 Overview (1)
- 4 Legal management requirements (2)
- 4.1 Unit of measurement (2)
- 4.2 Measurement legal signs and measurement instrument identification (2)
- 4.3 Provide technical documents and test prototypes for review (2)
- 5 Measurement requirements (3)
- 5.1 Resolution of the telescope (3)
- 5.2 Telescope magnification (3)
- 5.3 Effective aperture of telescope objective lens (3)
- 5.4 The perpendicularity of the level axis and the vertical axis (3)
- 5.5 Correctness of the rotation of the collimator (3)
- 5.6 The perpendicularity of the collimation axis and the horizontal axis (3)
- 5.7 The perpendicularity of the horizontal axis and the vertical axis (3)
- 5.8 Vertical index difference (3)
- 5.9 Compensator performance (3)
- 5.10 Telescope focusing operation error (3)
- 5.11 Alignment error of the aligner (3)
- 5.12 Standard deviation of horizontal direction in one measurement (3)
- 5.13 Standard deviation of vertical angle measurement in one measurement (3)
- 5.14 The correctness of the three-axis relationship between transmission, reception and sighting (3)
- 5.15 Modulated light phase uniformity (3)
- 5.16 Discrimination (3)
- 5.17 Periodic error (3)
- 5.18 Precision measuring ruler frequency (4)
- 5.19 Standard deviation of addition constant and multiplication constant (4)
- 5.20 Repeatability of distance measurement (4)
- 5.21 Scope (4)
- 5.22 Comprehensive standard deviation of distance measurement (4)
- 5.23 Standard deviation of distance measurement without cooperation target (4)
- 6 General technical requirements (5)
- 6.1 Appearance (5)
- 6.2 General functions (5)
- 6.3 The plumbness of the vertical wire of the telescope (6)
- 6.4 Working temperature test (6)
- 6.5 Transportation and environmental testing (6)
- 6.6 Electromagnetic compatibility test (6)
- 6.7 Shell protection ability test (6)
- 6.8 Laser emission power (7)
- 7 Type evaluation items and measuring instruments used (7)
- 7.1 Total station type evaluation items (7)
- 7.2 Measuring instruments used in the project (8)
- 8 Test methods and conditions of test items (9)
- 8.1 Legal management requirements (9)
- 8.2 Measurement requirements (9)
- 8.3 General technical requirements (35)
- 9 Judgment and processing of type evaluation results (40)
- 10 Type evaluation original record format (40)
- Appendix A Original Record Format of Total Station Type Evaluation Test (41)
- Appendix B. Comprehensive Standard Deviation Test for Ranging (Joint Assessment Method) (63)
1 Scope (1)
2 References (1)
3 Overview (1)
4 Legal management requirements (2)
4.1 Unit of measurement (2)
4.2 Measurement legal signs and measurement instrument identification (2)
4.3 Provide technical documents and test prototypes for review (2)
5 Measurement requirements (3)
5.1 Resolution of the telescope (3)
5.2 Telescope magnification (3)
5.3 Effective aperture of telescope objective lens (3)
5.4 The perpendicularity of the level axis and the vertical axis (3)
5.5 Correctness of the rotation of the collimator (3)
5.6 The perpendicularity of the collimation axis and the horizontal axis (3)
5.7 The perpendicularity of the horizontal axis and the vertical axis (3)
5.8 Vertical index difference (3)
5.9 Compensator performance (3)
5.10 Telescope focusing operation error (3)
5.11 Alignment error of the aligner (3)
5.12 Standard deviation of horizontal direction in one measurement (3)
5.13 Standard deviation of vertical angle measurement in one measurement (3)
5.14 The correctness of the three-axis relationship between transmission, reception and sighting (3)
5.15 Modulated light phase uniformity (3)
5.16 Discrimination (3)
5.17 Periodic error (3)
5.18 Precision measuring ruler frequency (4)
5.19 Standard deviation of addition constant and multiplication constant (4)
5.20 Repeatability of distance measurement (4)
5.21 Scope (4)
5.22 Comprehensive standard deviation of distance measurement (4)
5.23 Standard deviation of distance measurement without cooperation target (4)
6 General technical requirements (5)
6.1 Appearance (5)
6.2 General functions (5)
6.3 The plumbness of the vertical wire of the telescope (6)
6.4 Working temperature test (6)
6.5 Transportation and environmental testing (6)
6.6 Electromagnetic compatibility test (6)
6.7 Shell protection ability test (6)
6.8 Laser emission power (7)
7 Type evaluation items and measuring instruments used (7)
7.1 Total station type evaluation items (7)
7.2 Measuring instruments used in the project (8)
8 Test methods and conditions of test items (9)
8.1 Legal management requirements (9)
8.2 Measurement requirements (9)
8.3 General technical requirements (35)
9 Judgment and processing of type evaluation results (40)
10 Type evaluation original record format (40)
Appendix A Original Record Format of Total Station Type Evaluation Test (41)
Appendix B. Comprehensive Standard Deviation Test for Ranging (Joint Assessment Method) (63)
Introduction
This outline is based on JJF 1016-2014 "Guidelines for the Compilation of Outlines for Measuring Apparatus Type Evaluation" and JJF 1015-2014 Compilation of the requirements of the "General Specification for Type Evaluation of Measuring Instruments".
This outline mainly refers to JJG100-2003 "Total Station Electronic Speed Tester" in the test items and test procedures and JJG703-2003 "photoelectric rangefinder" related regulations.
This outline is published for the first time.
Total station type evaluation outline
1 Scope
This type evaluation program is applicable to the type evaluation of domestic and imported total stations with various accuracy levels.
2 Reference documents JJF 1069 Assessment Standards for Legal Metrology Verification Institutions GB/T 2423.4-2008 Environmental testing for electrical and electronic products. Part 2: Test method test Db.
Alternating damp heat (12h 12h cycle) GB/T 2423.10-2019 Environmental Test Part 2: Test Method Test Fc. Vibration (Sinusoidal) GB/T 4208-2017 enclosure protection level (IP code) GB/T 17626.2-2018 Electromagnetic Compatibility Test and Measurement Technology Electrostatic Discharge Immunity Test GB/T 17626.3-2016 Electromagnetic compatibility test and measurement technology RF electromagnetic field immunity test GB/T 25480-2010 Basic environmental conditions and test methods for transportation and storage of instruments and meters JB/T 9328-1999 Resolution board for dated reference documents, only the dated version applies to this outline; for those without date references the latest version (including all amendments) is applicable to this outline.
3 Overview
The total station is a kind of automatic and digital three-way instrument with functions of distance measurement, angle measurement, calculation and data recording and transmission.
Dimensional coordinate measurement and positioning system. It consists of photoelectric distance measuring unit, electronic angle measuring unit, microprocessor unit and electronic recording unit Composition is a widely used in control survey, topographic survey, cadastral and real estate survey, industrial survey and offshore positioning Electronic measuring instruments.
The accuracy level of the total station is divided into four levels according to the angle measurement and the distance measurement, expressed by Qbeta, d (the subscript beta is the angle measurement level, the subscript d is the ranging level. Such as QI, II, it means that the angle measurement of the total station is I, and the distance measurement is II).
The accuracy level of the angle measuring part of the total station is divided into four levels according to the nominal standard deviation mbeta of the horizontal direction of the first measurement. all the accuracy level of the distance measuring part of the station instrument is divided into four levels according to the nominal distance standard deviation md.
The expression of the standard deviation of the nominal distance of the total station is.
md=ab·D
In the formula.
a---Fixed part of the standard deviation of nominal distance measurement, mm;
b---Proportional coefficient of nominal deviation standard deviation, mm/km;
D---Measure distance, km.
See Table 1 for the division of the accuracy level of the total station.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 47 pages — is available in the English PDF.
How to Download JJF 1784-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1784-2019
$830.00