JJF 1779-2019Program of Pattern Evaluation of Electricity Meters for Direct Current Energy (English PDF)
电子式直流电能表型式评价大纲
This is a limited preview
Buy now to download the full PDF (55 pages)
Need quotation for your management?
Get a formal quotation for JJF 1779-2019 in 30 minutes.
Issued by
State Administration for Market Regulation
Level / Type
National · Mandatory
Issue date
January 1, 2019
Implementation date
March 31, 2020
Scope
JJF 1779-2019 is the English-translated version of 电子式直流电能表型式评价大纲.
JJF 1779-2019 is the Chinese standard "Program of Pattern Evaluation of Electricity Meters for Direct Current Energy".
Found what you need?
Document preview — JJF 1779-2019
Contents
- Introduction (III)
- 1 Scope (1)
- 2 References (1)
- 3 Terms and definitions (2)
- 4 Overview (2)
- 5 Legal management requirements (4)
- 5.1 Unit of measurement (4)
- 5.2 Accuracy level requirements (4)
- 5.3 Requirements for measurement legal signs and measurement appliance labels (4)
- 5.4 External structure design requirements (5)
- 5.5 Installation mark requirements (5)
- 6 Measurement requirements (5)
- 6.1 Basic error (5)
- 6.2 Initial start (7)
- 6.3 Starting (7)
- 6.4 Stealth (7)
- 6.5 Electric energy meter constant (8)
- 6.6 Clock accuracy(8)
- 6.7 Change of error caused by influence quantity (8)
- 7 General technical requirements (9)
- 7.1 Mechanical and structural requirements (9)
- 7.2 Climatic conditions (14)
- 7.3 Electrical requirements (15)
- 7.4 Electromagnetic compatibility (EMC) (18)
- 8 Type evaluation item list (21)
- 9 Provide technical documents and test prototypes for review (23)
- 9.1 Technical information submitted by the applicant (23)
- 9.2 Test prototype (23)
- 10 Type evaluation conditions and methods (23)
- 10.1 Measurement requirements (23)
- 10.2 Mechanical requirements (27)
- 10.3 Climatic conditions (31)
- 10.4 Electrical requirements (33)
- 10.5 Electromagnetic Compatibility (EMC) (39)
- 11 Table of measuring instruments and equipment used in the test project (46)
- Appendix A Type Evaluation Record Format (49)
- Appendix B Type Evaluation Report Format (69)
- Appendix C Format of "Description" for Type Evaluation Preservation Prototype (74)
- Appendix D. Test voltage waveforms affected by voltage sags and short interruptions (75)
1 Scope (1)
2 References (1)
3 Terms and definitions (2)
4 Overview (2)
5 Legal management requirements (4)
5.1 Unit of measurement (4)
5.2 Accuracy level requirements (4)
5.3 Requirements for measurement legal signs and measurement appliance labels (4)
5.4 External structure design requirements (5)
5.5 Installation mark requirements (5)
6 Measurement requirements (5)
6.1 Basic error (5)
6.2 Initial start (7)
6.3 Starting (7)
6.4 Stealth (7)
6.5 Electric energy meter constant (8)
6.6 Clock accuracy(8)
6.7 Change of error caused by influence quantity (8)
7 General technical requirements (9)
7.1 Mechanical and structural requirements (9)
7.2 Climatic conditions (14)
7.3 Electrical requirements (15)
7.4 Electromagnetic compatibility (EMC) (18)
8 Type evaluation item list (21)
9 Provide technical documents and test prototypes for review (23)
9.1 Technical information submitted by the applicant (23)
9.2 Test prototype (23)
10 Type evaluation conditions and methods (23)
10.1 Measurement requirements (23)
10.2 Mechanical requirements (27)
10.3 Climatic conditions (31)
10.4 Electrical requirements (33)
10.5 Electromagnetic Compatibility (EMC) (39)
11 Table of measuring instruments and equipment used in the test project (46)
Appendix A Type Evaluation Record Format (49)
Appendix B Type Evaluation Report Format (69)
Appendix C Format of "Description" for Type Evaluation Preservation Prototype (74)
Appendix D. Test voltage waveforms affected by voltage sags and short interruptions (75)
Introduction
This outline is based on the national measurement technical specification JJF 1015-2014 "General Specification for Type Evaluation of Measuring Instruments", JJF 1016-2014 "Guidelines for the Compilation of Outlines of Measuring Apparatus Type Evaluation", JJF 1001 "General Terms and Definitions of Measurement" the requirements are compiled.
This outline 7.1.6 "Electrical Clearance and Creepage Distance" adopts IEC 61010-1:2010 "Measurement, Control and Safety requirements for electrical equipment used in laboratories. Part 1: General Requirements electricalequipmentformeasurement,control,andlaboratoryuse-Part 1: General requirements) in Table 3, Table K.4 and 6.7.1.3.
This outline is published for the first time.
Outline of Type Evaluation of Electronic DC Electric Energy Meter
1 Scope
This outline is applicable to the 0.2, 0.5, 1 and 2 electronic models with the classification code of measuring instruments 15262500 (Static) Type evaluation of DC energy meters.
This outline does not apply to the following situations.
---Electronic DC energy meter with reference voltage exceeding 1000V;
---DC standard electric energy meter;
---Car electronic DC electric energy meter.
2 Reference documents the outline cited the following documents.
JJG842-2017 electronic DC electric energy meter GB/T 2423.1-2008 Environmental testing for electrical and electronic products Part 2: Test methods Test A.
Low temperature
GB/T 2423.2-2008 Environmental testing for electrical and electronic products Part 2: Test methods Test B.
high temperature
GB/T 2423.4-2008 Environmental testing for electrical and electronic products. Part 2: Test method test Db.
Alternating damp heat (12h 12h cycle) GB/T 2423.5-2019 Environmental Test Part 2: Test Method Test Ea and Guide. Impact GB/T 2423.10-2008 Environmental testing for electrical and electronic products. Part 2: Test methods Test Fc.
Vibration (sine)
GB/T 2423.24-2013 Environmental Test Part 2: Test Method Test Sa. Simulate Ground Solar radiation and its test guidelines GB/T 2423.55-2006 Environmental testing for electrical and electronic products. Part 2: Environmental testing Eh.
Hammer test
GB/T 4208-2017 enclosure protection level (IP code) GB/T 5169.11-2017 Fire hazard testing for electrical and electronic products. Part 11: Glow wire/hot wire base Glow wire flammability test method for finished products of this test method (GWEPT) GB/T 16935.1-2008 Insulation coordination of equipment in low-voltage systems Part 1: Principles, requirements and test GB/T 17626.2-2018 Electromagnetic Compatibility Test and Measurement Technology Electrostatic Discharge Immunity Test GB/T 17626.3-2019 electromagnetic compatibility test and measurement technology RF electromagnetic field radiation immunity test GB/T 17626.4-2018 electromagnetic compatibility test and measurement technology electrical fast transient burst immunity test GB/T 17626.5-2019 EMC test and measurement technology surge (shock) immunity test
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 55 pages — is available in the English PDF.
How to Download JJF 1779-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JJF 2425-2026 — Calibration specification for carbon dioxide incubators
JJF 1183-2025 — Calibration Specification for Temperature Transmitters
JJF 1282-2025 — Calibration Specification for Time Delay Relays
JJF 1779-2019
$1,175.00